Airplane Motors

 Twisted Hobbys "Crack Series Pro" CSP 1407-3600KV 17g out-runner specifically design for the Gripen Dual motor models.  Quality without compromise all Crack Series Pro motors are proven to outlast and provide you with endless flights...

 Twisted Hobbys "Crack Series" CS-17/31M 2650KV 12g out-runner is our smallest motor.  Specifically design for the Mini Series as well as Crack Wing models.  Quality without compromise all Crack Series motors are proven to outlast and...

Though Twisted Hobbys is known for airplane designs we are also well known for creating some of the most powerful small motors available and Crack Series Pro are the perfect example!  We have done it again, we have surpassed our most popular small...

Though Twisted Hobbys is known for airplane designs we are also well known for creating some of the most powerful small motors available and Crack Series Pro are the perfect example!  We have done it again, we have surpassed our most popular small...

All though Twisted Hobbys is well known for its airplane designs we specialize in creating the most powerful high quality brush-less motors in the market!  We have done it again with the new Crack Series Pro motors, we have surpassed our most...

While Twisted Hobbys has already been known for designing airplanes, we also create some of the most powerful small motors available and our Crack Series Pro series are the perfect example!  We have done it again, we have surpassed our most popular...

Elan Motors 2205-2600kv was created for the Proxy FPV aircraft and other quad style high-end motor requirements.   If using with ProXy model, it will require a flange mount quad adapter. Spec’s:2205 : KV: 2600Shaft Diameter: 3.0mm,...

While Twisted Hobbys has already been known for designing airplanes, we also create some of the most powerful small motors available and our Crack Series Pro series are the perfect example!    Our goal was to create the most powerful, better...

  The Twisted Hobbys Crack Series Pro 2217 70g 1170KV motor is an excellent choice for you 22-32oz model.  Newly revised and updated design for even lower weight yet more power.  While lowering watts and amps output surprisingly we...

The Twisted Hobbys Crack Series Pro "CSP" 2814-1050KV 100g motor is an excellent choice for your 42-48" models or any other 22-32oz model.  Newly revised and updated design for even lower weight yet more power.  While lowering watts and amps...

Hardware replacement kit that comes with all Crack Series Pro small flange based (2202,2203,2206,2305) out-runner motors.  Included 4pc's 5.5 to 7mm prop hub adapters, 4 mounting screws and 4 o-rings.

These are the classic series original hardware bags that came standard with our 2202/2203/2206 Crack Series motors.  Included two different prop hub adapter a 7mm and 8mm, 4 mounting screws and 2 o-rings.

TMW Hardware kit that comes standard with our TMW 2203/2204 and 2206 Beast motors.  Included prop hub adapter, 4 mounting screws and 1 o-rings.

Used for All Crack Series Prop and TMW 2212 series motors.   Prop Adapter bolt on style mounted opposite side of the shaft (reverse mounting) also now includes mounting flange mount screws.  This is the stock part that comes with the 2212...

Crack Series Prop and TMW 2217 replacement 5mm front prop hub assembly with screw kit.  Includes motor mount, prop hub adapter, mounting screws, prop hub and washer. Used for Crack Series Pro and TMW 70-78g motors.

TMW & Crack Series Pro 2814 complete replacement hardware bag.  Included 6mm front prop hub adapter, mounting screws (front and back), flange mount, prop hub locking nut and washer.

Great way to run a standard quad motor to a standard flange mount style.  Mount is made from Alum which is very strong and is a great heat conductor, also mount motor mounting screws are countersunk for no interference this kit sits flat and true...

Replacement C-Clips for 3mm shafts. 10 pc's included

Replacement 3.12mm Shaft for Crack Series 2208 motors 2 pc shafts included Shaft Diameter = 3.12mm (.125) Length of shaft = 43mm

These are the direct replacement Collect/Prop Adapter 3.17mm shaft out-runner motors.   Prop thread diameter = 5mm +/- .025

These are the direct replacement Collect/Prop Adapter 4mm shaft out runner motors Hub (motor shaft) diameter = 4mm Prop thread diameter = 6mm +/- .025