Description
Twisted Hobbys 6A ESC w/ 6V BEC, designed to with the Crack Series smaller out-runner brushless motors. Capable of running full load of 3 digital servo with a custom BEC chip set.* Twisted Hobbys Programmable ESC's offer the highest performance and reliability you can trust. Each 6A ESC are constructed with (1) female JST connector and (3) 2mm bullet connectors allowing for a true plug and play setup.
Specs:
- Continuous 6A,Burst 8A (10 sec's)
- Input: 2-3s Lipo
- BEC : 5V/1+A Linear (double chip set for digital servos)
- Measurement: 21x13x4mm
- Weight: 6.8g including 2mm bullet and female JST connector
- Recommended prop setup: 2s w/ 8x4.3 slow fly
Default Pre-Programmed Settings:
- Battery Type = Lipo
- Governor Model = Rpm Off
- Start Up = Soft
- Brake = Off
- Timing = Auto
- Rotation = Normal
- Voltage cut off = 3.00 (60%)
- Cut off Power = Reduce power
Same default settings as Programming Card Link
See Video Below for Throttle Calibration Video which must be done for ESC to work correctly.
