The Crack Series 2220 80g 1150KV motor is an excellent choice for your 43-44" models or any 18-26oz models. The 2220 always for lowering watts and amps while increasing thrust output with the use of a larger prop diameter. Without breaking a sweat the new Crack Series out runners will easily achieve great vertical performance on any of our smaller park flyer models. Recommended setup = 11x5.5 E props running 3s 1800-2200mah packs.
Propeller size: 11x4.7sf / 11x5.5 E Prop
Case diameter: 28mm
Case length: 36mm
Shaft diameter: 3.10 mm
RPM per Volt (KV): 1150
Li-Po cells: 2-4
35 Amps : Max Burst = 45
Constant watts = 350 : Max = 550
Motor Mount = 30.5mm x 30.5mm which works perfectly with the Secraft or standard Telink Motor Mounts.
Full hardware bag includes:
Front and rear prop mounting setups, 3.5mm pre-soldered bullet connects are also completed for quick and easy installation.