Power Combo Super Lite Series (B)
- SKU:
- PC06
Description
BUNDLE AND SAVE! Twisted Hobbys series power combos gives you the perfect balance of performance, quality products at affordable prices.
Our matched components are a true plug & play system ready to be installed. The heart of the power system lies with our CSP 18g 1800KV (low kv) motor / 15A CSP ESC provide extreme performance and reliability for your SUPER-LITE or similar models. Along with our new CSP servos designed to give you the most in performance and durability. Recommend setup: 2s 350-600mah w/ 8" props.
PC06 Power System Includes:
- CSP 2203-1800kv
- CSP 15A ESC
- (3) CSP-D6M Servo
- 8x4.3 GWS SF Prop
- Click
- Synergy
- Slick Super Lite
- Extra 330 Super Lite
- Edge 540 Super Lite
Edge 540 V4.0 - MX2
Related Products
BEACON FOAM TAC - 1 oz. TUBE - EPP Models
$11.99
Expect the freshest Beacon Foam Tac glue(s) from Twisted Hobbys due to high turn over. New redesigned tube and cap! Great alternative to Welder Adhesive glue and CA glues when building...
Carbon Fiber 33" Clik & Synergy
MSRP:
$34.99
$29.99
It doesn't get more comprehensive then this guys, upgrade it to the max!!! Crack Series Clik Super Lite Carbon Fiber Upgrade Hardware Kits are design for the EPP Click NG, R2 and 21 also will work...
Prop Direct Drive GWS 8 x 4
$1.99
Great for indoor and out door EPP models! *Remember always check prop balance before flying* Color may vary.
Prop Slow Fly GWS 8 x 4.3
$1.99
The new 8x4.3 GWS slow fly prop has been redesigned for longer hub life compared to the original hex hub which also helps better prop balancing! GWS designed this prop with a 7mm hub diameter...
Prop-Saver Bands "Standard Duty" (5)
$4.99
Not your ordinary over-the-counter O-ring, great replacement 3/32" thick standard bands ideal for running stock setup systems running 2s! Great replacements for our...
Twisted Hobbys Control Throw Angle-Meter Tool
$9.99
Finally an accurate way to set up all your control surface throws on your 3d models. The Twisted Hobbys Angle-O-Meter is one of the most important tools need to fine tune your models...