We're breaking all the rules again with the Crack Fokker! Twisted Hobbys has taken the feel and concept of WWI flying machines and daredevil pilots to fantastic new places. Envisioned in the demented mind of Twisted addict Steve Marble, designed and drawn by Cody Wojcik, and realized by RC Factory, the Crack Fokker combines 3D flying, WWI dog-fighting, a huge speed range, and silly aerobatics for more fun than you can imagine.
With a whole new set of flight characteristics the Crack Fokker is like no other model we have. Loops are beyond tight and roll rate is extremely axial and quick for the amount of wing area. That huge wing area means that speeds range from surprisingly brisk to so slow it looks like a camera trick. The fun doesn’t stop there...with dual aileron servos you can even add mixing for multiple flap settings for tail-high slow speed passes and and even tighter loops than any other model. The Crack Fokker is pure flying fun in a way that nobody has experienced before.
Paint and art work was inspired by one of the classic schemes, keeping true to the Fokker's roots. Like all Twisted Hobbys models quality is superior and building is a pleasure with the latest hardware that eliminates excess weight while removing any unwanted play from all the control surface connections.
Twisted Hobbys as always has spent time selecting the correctly matched electronics for the Crack Fokker, available as a convenient power combo. Recommended stock setup is 2s 600-800mah w/ 9x4.7 or 3s 450-600mah w/ 8x4DD for advanced pilots. Enjoy the look of a classic Fokker Dr.1 with flight characteristics you have only dreamed of!
Wing Span = 35”
Length = 34”
AUW = 8.1 oz (depending on lipo size)
Recommended Required Electronics:
24-26g 1400-1500kv Out Runner Brush-less Motor
(4) 7-9g Servos
2s 600mah Lipo Battery
9x4.7 Slow Fly Prop
Adhesive Glue (Beacon or Welders)
Videos Hide Videos Show Videos
Twisted Hobbys Crack Fokker: 2s cruising with Cdee Scarf Mod
Nice and easy flight with the TwistedHobbys Crack Fokker. The ...
Crack Fokker & Marek Plichta
A marriage made in heaven :)
Indoor RC flying 2018
Amazing indoor flight,when it's raining outside just fly aroun...
Robert's Twisted Hobbys Crack Fokker Dr.1 w/ Custom Light Set - Night Flight
In 1080p 60fps - This is a Night Flight of Robert's Twisted Ho...
8 Reviews Hide Reviews Show Reviews
This thing is incredible fun! I have the crack yak and ok it's good practice for 3d but this little fokker is a trip! Way easier and more fun to fly love it!
This is by far the best flying non traditional 3D foamie I have flown. Its so stable and confidence inducing, I was completely confident with hucking it around low on the first flight
With only five flights on this plane I am really enjoying it. Assembly was a bit of a chore with all the small parts, kind of a challenge for old stiff fingers. Used magnifiers and tweezers a lot. Almost the most fun you can have with your pants on.
I just got done doing a maiden flight with this plane and I loved every minute of it the set I'm using is Emaxx 2206 1500kv, Thunderbird 35 amp esc(yes I know it's big but I love to always use slightly bigger esc just to be on the safe side the weight doesn't effect this bird at all IMHO!) 4 9G Ice Digitals,swinging a 8x4.5 SF prop&turnigy 3s graphene 800 mah lipo(get about 5 mins) this plane as soon as I take I didn't not one once of trimming it felt so reliable I did every 3d move in the book Hovers,Rolling Harriars(Which this was always a stunt I was always 50/50 with because of my past planes either roll so fast it's hard counter or just stall out but this triplane does it so slow and very easy that it feels like I'm cheating lol) inverted harriars,inverted flatspins&knife edge(yes even loop it in a knife edge too without any troubles at all) So this plane is going to be the one I take out the park a lot no BS this my 2nd plane from TH the first being there Puddlestar which that's another fun one too one day I will pick up either there Revo P3 or there Crack Big Beaver or hell why not both of them at the same time? LOL! Get this triplane ASAP and you'll have a big smile as I did after I landed.
wow the kit is beautiful. everything fits like a glove
Great flying plane. Assembles easily, although I did make a couple of changes. I replaced the 0.8mm CF pushrods on the elevator and rudder with 1.0mm that I had on hand. I also broke the CF axle with a less than spectacular maneuver that hit the floor pretty hard. I have since replaced the CF with metal. The pilot that TH includes has been replaced with Snoopy. I wish TH would provide a few spares for the brass pin for the clevises and the retainer for the quick links. Both are very sneaky and love to hide, never to be found.
Just a wonderful model its another model i can not stop enjoying right now. Have all of Twisted Hobbys models and couldn't resist this one and glad i didn't! Went together with out a hitch, instructions were good though I got confused on two areas of the build which I emailed Twisted for directions. These guys helped quickly with parts location. We belong to Flying Aces Pilot Association in NC and fly all our Twisted stuff there, everyone has already had to pull the sticks on the new Fokker's. Great model and great bunch of guys there at Twisted. Your loyal customer. Kenny Holland
Ok its been said Twisted Hobbys makes the best stuff and we can admit its true. Ordered a Blue one and now ordered a Red Fokker. These are like candy you can't just have one. Fly my Fokker ever time we head to the club, guys are happy we found these flyers. God bless.