AIRCRAFT

Rc Factory Small Brass rod connection parts for larger models.  MP-JET brass connectors that come with large models hardware parts to connector .8-1mm carbon fiber push rods to control horns.   Use on all the smaller Rc Factory models...

Rc Factory Med Brass rod connection parts for larger models.  MP-JET brass connectors that come with med to large size models hardware parts to connect 1.5mm carbon fiber push rods to control horns.   Specs: 4 pc's : MP-JET Brass...

Rc Factory Spare parts: MP-JET Ball Link connector kit.   Included: 2 pcs MP-Jet Ball Link Connector 2 pcs MP-Jet 1.5mm Screw

Rc Factory Largest Brass rod connection parts for larger models like the Veloxity and Edge XL.  MP-JET brass connectors that come with larger models hardware parts to connect 1.8mm carbon fiber push rods to control horns.   Specs: 4...

Rc Factory Spare parts: MP-JET horn-link connection kit.  Used for the 36" Flash and also the 39" Edge 540/Extra 300/Crack Yak-55 models and Beaver Float Kit as well as other models.   Included: 2 pcs MP-Jet Brass clevis pins 2 pcs...

Hacker Model Spare parts: MP-JET Large horn-link connection kit.  Used for the 48" SUpreme Model as well as other models. Ideal for 1.8-2mm carbon fiber rod.  Brass pin diameter is 1.55mm   Included: 4 pcs MP-Jet Brass clevis...

Used for multiple types of linkages including airplanes and boats control linkages Includes: 4 x D2.1mm Linkage Stoppers

Used for multiple types of linkages including airplanes and boats control linkages Includes:(1) 1.2mm x 200mm Metal Rod with Z bend pre-bent.(1) Clevis assembly for rod end(1) Horn and backing base.  Horn Height is 18mm tail(1) Adjustable Rod end...

Design for the 30-32" EPP models and or any other foamie 5oz -11oz. Ideal for a light weigh indoor use can be used for out door use as well. *Drilling, gluing and assembly my be required*        

Design for the 30-32" RcFactory/Hacker and any other foamie 5oz -11oz. Ideal for indoor/outdoor use. Each kit contains a set of lightweight carbon-fiber landing gear, g10 fuselage supports, g10 spats support strips, EPP spats and lightweight wheels and...

Replacement EPP Cowl for Gee Bee.  Just like the original each EPP part is high quality printed on both sides. Includes: 1 piece EPP cowl only.  

Replacement EPP Cowl for Gee Bee.  Just like the original each EPP part is high quality printed on both sides. Includes: 1 piece EPP cowl only.

Rc Factory landing gear 1 piece.  Used for any of the Rc Factory 37-39" Models 1 piece landing gear. Include one piece carbon fiber landing gear.

Rc Factory 42-43" Replacement Carbon-Fiber Landing Gear 1 piece assembly, this is for all newer revised landing gears.  Include a 1 piece carbon fiber landing gear set.   

Hacker Models 48" or Rc Factory 42-43" Replacement Carbon-Fiber Landing Gear.  Include a two piece carbon fiber landing gear set.   Comes standard on Hacker Model 48" SUpreme model, can also be used for other models including classic...

Rc Factory replacement CYXL tail wheel assembly kit.  Can be used on multiple other models.  

We wanted to create something very strong and durable, most wheels today come with soft foam tires that get destroyed quickly.   Great option for those who would like to fly on hard wear surfaces as well as taxi with more ease.   Can be...

We wanted to create something very strong and durable, most wheels today come with soft foam tires that get destroyed quickly.   Great option for those who would like to fly on hard wear surfaces as well as taxi with more ease.   Can be...

Great option for those who would like to fly off of higher thicker grass as well as taxi with more ease.   Great for 35-48” models, some modifications may be require depending on axle size and fitment.   Kit includes: 1 wheel and 1...

Replacement wheels from Rc Factory models.   Great for 35-48” models, some modifications may be require depending on axle size and fitment.   Kit includes: 2 Foam Wheels   Spec’s: (2) 51mm (2.”) x 11mm (.42”)...

Twisted Hobbys Tail Wheel Assembly Kit, used for 36-48" models.  Removes all worries for wearing down hard stock or EPP tail wing.  Durable and easy to assembly as well as install.   Total weight is 9g. Assembly Photo...

Rc Factory 43" Mono model wheels kit replacement parts.   Used for the 43" Crack Yak XL, Veloxity, Edge XL  

Looking for a solution for your standard wheel pants getting caught in the grass during take off or landing and causing a nose over, or just getting completely ripped off?   There is now an alternative, you don't have to fly with your wheels...

Having fun with your Crack Turbo Beaver isn't just limited to the land any more!   We welcome the RcFactory Crack Turbo Beaver Float Kit, made of ultra light weight cut foam and utilizing the stock landing gear assembly with additional...

Float set for the Fun Master or Master Stick Models also includes a water rudder control assembly, including accessories. Water rudder is controlled with flexible push rod runs from the air rudder servo. Taxiing and take off is more fun and safe with...

Used for the 43" Hardware axle replacement.  Measurement are 1/8" x 1 1/2" made from harden steel and works directly wtih the stock Tundra tires that comes with each 43" EPP Beaver models. 

RcFactory "Mini Pitts" replacement laser cut horn kits, this is the updated revised horns for snap link assembly version "B" This is the same horns kit that come standard in each 22" models. Designed to work with standard running gear.  

RcFactory's 24" Mini replacement horn kits R2.  Please note these are the newest revised horns designed to work with snap-link control horn assembly.  

Rc Factory replacement 30-32" standard Aileron Differential horn   

RcFactory replacement 30-32" standard horn R2. This is the same horns kit that come standard in each 30-32" Standard Twisted Hobbys/RcFactory models except for MXS-C Model.  Not designed to work with older z-bend contorl horn setup assembly,...

RcFactory replacement Laser / Crack Yak Lite horns, designed to work with snap links.  

RcFactory replacement MXS-C Plastic Horn pieces. This is the same horns kit that come standard in each 32" Standard Twisted Hobbys/RcFactory MXS-C models.

RcFactory 35" Beaver replacement laser wood horn kits. This is the same horns kit that come standard in each 35" Twisted Hobbys/RcFactory Beaver Models.  Designed to work with standard running gear.  * Note all new Beaver Horns are designed...

RcFactory replacement plastic 39" horn kit. This is the same horns kit that come standard in each 39" Twisted Hobbys/RcFactory models (Crack-Yak-55, Edge 540, Extra).  Rev 2 is the newest horns included in our models.

Rc Factory replacement Revo 37" Biplane horns.  

Replacement 39" EPP Revolto Green SFG's (2 pc's)

RcFactory replacement plastic 39" Revolto horns. This is the same horns kit that come standard in each 39" Twisted Hobbys/RcFactory models (Revolto).  

RcFactory Raptor Spare Parts Kit: Used for the 22" Gripen F-22 EPP Jet.  This is the replacement accessories that comes with each 22"  EPP Gripen Jet model.

RcFactory Raptor Spare Parts Kit: Used for the 29" Raptor F-22 EPP Jet.  This is the replacement accessories that comes with each 29"  EPP Raptor Jet model.

RcFactory Mini Pitts Spare Parts Kit "B": Used for the 22" Mini Pitts Hardware accessories kit.   This is the replacement accessories that comes with each 22" Mini Crack Pitts EPP models, Version "B" include adjustable end link assembly to...