37-39" Model Parts

Stiff High-Strength Carbon Fiber Rod:  .8mm x 560mm push rods very durable.  Used for Rc factory/Twisted Hobbys EPP model bracing and other assemblies.  Spec's: (1 pc) = .8mm x 560mm  

Stiff High-Strength Carbon Fiber Rod:  1mm x 560mm push rods very durable.  Used for Rc factory/Twisted Hobbys EPP model bracing and other assemblies.  Spec's: (1 pc) = 1mm x 560mm  

Stiff High-Strength Carbon Fiber Short tube:  4mm x 3mm x 330mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies.  Used for full rotating elevator (Revolto) Spec's: (1 pc) = 4mm OD/3mm...

Stiff High-Strength Carbon Fiber Short Rod:  1.5mm x 250mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies Spec's: (1 pc) = 1.5mm x 250mm  

Stiff High-Strength Carbon Fiber Short Rod:  1.8mm x 250mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies Spec's: (1 pc) = 1.8mm x 250mm  

Stiff High-Strength Carbon Fiber Short Rod:  2mm x 250mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies Spec's: (1 pc) = 2mm x 250mm  

Rc Factory Small Brass rod connection parts for larger models.  MP-JET brass connectors that come with large models hardware parts to connector .8-1mm carbon fiber push rods to control horns.   Use on all the smaller Rc Factory models...

Rc Factory Med Brass rod connection parts for larger models.  MP-JET brass connectors that come with med to large size models hardware parts to connect 1.5mm carbon fiber push rods to control horns.   Specs: 4 pc's : MP-JET Brass...

Rc Factory Spare parts: MP-JET Ball Link connector kit.   Included: 2 pcs MP-Jet Ball Link Connector 2 pcs MP-Jet 1.5mm Screw

Rc Factory Largest Brass rod connection parts for larger models like the Veloxity and Edge XL.  MP-JET brass connectors that come with larger models hardware parts to connect 1.8mm carbon fiber push rods to control horns.   Specs: 4...

Rc Factory Spare parts: MP-JET horn-link connection kit.  Used for the 36" Flash and also the 39" Edge 540/Extra 300/Crack Yak-55 models and Beaver Float Kit as well as other models.   Included: 2 pcs MP-Jet Brass clevis pins 2 pcs...

Hacker Model Spare parts: MP-JET Large horn-link connection kit.  Used for the 48" SUpreme Model as well as other models. Ideal for 1.8-2mm carbon fiber rod.  Brass pin diameter is 1.55mm   Included: 4 pcs MP-Jet Brass clevis...

Rc Factory landing gear 1 piece.  Used for any of the Rc Factory 37-39" Mono and 40" Crack Pitts XL models. Include one piece carbon fiber landing gear.

RcFactory replacement plastic 39" horn kit. This is the same horns kit that come standard in each 39" Twisted Hobbys/RcFactory models (Crack-Yak-55, Edge 540, Extra).  Rev 2 is the newest horns included in our models.

Rc Factory replacement Revo 37" Biplane horns.  

Replacement 39" EPP Revolto Green SFG's (2 pc's)

RcFactory replacement plastic 39" Revolto horns. This is the same horns kit that come standard in each 39" Twisted Hobbys/RcFactory models (Revolto).  

RcFactory Spare Part 37" Revo Biplane models hardware bag.   This is the replacement accessories that comes with each kit.

RcFactory Spare Part 39" Super Extra L models hardware bag.   This is the replacement accessories that comes with each kit. 

RcFactory Spare Part 39" Revolto models hardware bag.   This is the replacement accessories that comes with each kit.  

RcFactory Spare Part for the 39" Flash Reloaded models hardware bag, does not include V3 models.   This is the replacement accessories that comes with each kit.  

RcFactory Spare Part 39" Edge 540 v3 models hardware bag.   This is the replacement accessories that comes with each kit.  

RcFactory Spare Part for the Classic Series 39" Edge 540, Extra 330 and Crack Yak-55 models hardware bag, does not include V3 models.   This is the replacement accessories that comes with each kit.  

 Hacker Model hardware bag for the 39" Edge V3. Includes:   See photo for reference of parts.