Parts By Wing Span

Replacement for 30-32" Standard EPP Models, 10mm wide Plastic mount with pre-drilled holes.

Replacement for 30-32" Lite Series as well as other EPP Models, 8mm wide fiber glass mount with pre-drilled holes.

Replacement for 30-32" Standard EPP Models, 10mm wide fiber glass mount with pre-drilled holes.

Hacker Models R-Extra Thrust Vectoring Motor Mount Designed for the Hacker Models R-Extra series, this lightweight thrust motor mount upgrade adds full left and right thrust movement for enhanced...

Used on Super lite V3 or simlar models for added left/right thrust vectoring.  Motor mount with ball studs for motor vectoring.  Included parts weight = 3.5g

Stock replacement Edge V3 Motor Mount for Thrust Vectoring.

Specs: Motor pylon for the Termik model, ideal for 1806 motors

These unique snap-in type control link are used similar to z-bend style of control horn connections.  Features:

Genuine Rc Factory Quick Link Parts!   Used on all Rc Factory adjustable end links, 10 pc's of new updated backing ring.  Great replacement package!

Genuine Rc Factory Quick Link Parts!   Used on all Rc Factory adjustable end links, Great replacement and or upgrage package!

Rc Factory Spare parts: MP-JET Ball Link connector kit.   Included: 10 pcs MP-Jet B

Rc Factory Spare parts: MP-JET horn-link connection kit.  Used for the 36" Flash, 39" Edge 540/Extra 300/Crack Yak-55 and Revolto amount many more models as well as Beaver Float Kit.   Fits 1.8mm...

Threaded Terminal – M2 Thread with 1mm Inner Diameter Description:Rc Factory

Rc Factory Med Brass rod connection parts for larger models.  MP-JET brass connectors that come with med to large size models hardware parts to connect 1.5mm carbon fiber push rods to control horns...

Rc Factory Largest Brass rod connection parts for larger models like the Veloxity, Edge XL, Crack Yak XL and Crack Pitts XL.  MP-JET brass connectors that come with larger models hardware parts to...

Hacker Model Spare parts: MP-JET Large horn-link connection kit.  Used for the 48" SUpreme Model as well as other models. Ideal for 1.8-2mm carbon fiber rod.  Brass pin diameter is 1.55mm

Aluminum press nuts with M4 thread. Key Features

Set of hinges for attaching rudders. Key Features

Rc Factory Space Adapter White Tube - 2mm OD x 1.2mm ID.  Used for MP Jet connections and or other small adapter size requirements. MP-Use on all the smaller Rc Factory models 35" and smaller.

10 pc's pack of push rod standoff (guides) with 1.50mm hole diameter and18mm height.  These are used to support the long push rods from the servos arm to the control surface horns.  

Stiff High-Strength Carbon Fiber Rod:  .8mm x 560mm push rods very durable.  Used for Rc factory/Twisted Hobbys EPP model bracing and other assemblies.  Spec's: (1 pc) = .8mm x 560mm  

Stiff High-Strength Carbon Fiber Rod:  1mm x 560mm push rods very durable.  Used for Rc factory/Twisted Hobbys EPP model bracing and other assemblies.  Spec's: (1 pc) = 1mm x 560mm  

Stiff High-Strength Carbon Fiber Short Rod:  1.5mm x 250mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies Spec's: 

Stiff High-Strength Carbon Fiber Short Rod:  1.8mm x 250mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies Spec's: (1 pc) = 1.8mm x 250mm  

Stiff High-Strength Carbon Fiber Short Rod:  2mm x 250mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies Spec's: (1 pc) = 2mm x 250mm  

Stiff High-Strength Carbon Fiber Short tube:  3mm x 2mm x 250mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies.  Can be used for the Gee Bee...

Stiff High-Strength Carbon Fiber Short tube:  4mm x 3mm x 330mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies.  Used for full rotating elevator...

Stiff High-Strength Carbon Fiber Short tube:  5mm x 4mm x 330mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies.  Used for larger elevator (Crack...

Design for the 30-32" EPP models and or any other foamie 5oz -11oz. Ideal for a light weigh indoor

Design for the 30-32" RcFactory/Hacker and any other foamie 5oz -11oz. Ideal for indoor/outdoor use. Each kit contains a set of lightweight carbon-fiber landing gear, g10 fuselage supports, g10 spats...

Rc Factory landing gear 1 piece.  Used for any of the Rc Factory 37-39" Mono models.  

Rc Factory landing gear 1 piece.     Includes:  One piece carbon fiber landing gear.

Rc Factory landing gear 1 piece.     Includes:  One piece carbon fiber landing gear.

Rc Factory landing gear 1 piece.  Used for any of the Rc Factory Crack Pitts XL and Air Truck models.    Includes:&nbs