TOOLS

Blenderm tape is one of the best know tapes used for hinging and repairing your Depron or Epp models. Each 3M Blenderm key features are its high strength adhesive, extremely flexible and long lasting.   Each roll consists of 1/2" wide x 4m in...

Perfect choice for building and repairing your Twisted Hobbys EPP planes! This is the only adhesive you will ever need. Welder virtually bonds anything to anything! Clear, heavy-duty, flexible and water-proof when dry. Use indoors or out. (2) 1 oz tube...

Great alteritive to Welder Adhesive for sure on EPP Foam.  FOAM-TAC’S improved formula now contains UV blockers so that it can be used in the field in direct sunlight without any yellowing or degrading. We’ve also added a special...

Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the...

INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas,...

MAXI-CURE extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE is the best choice for plastic model assembly. When used with INSTA-SET, it works better than any putty for modifying or filling voids. It can be carved...

One of the best EPP CA Foam glues unlike any other CA glues we have come across. SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes...

INSTA-SET is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization.  INSTA-SET in a spray bottle is normally used to cure the CA that flows from joints...

Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids...

Pocket CA Extender Tip -  For use with BSI's Pocket CAs. It slips over the tip of the Pocket CA top to allow for finer application of the CA. With the tip, the CA can be applied to confined areas.

Used for holding batteries, receivers, esc's or other components down.  Great addition for modeling. Includes: 2 pc : Black 3/4" x 6" Velcro Hook & Loop sticky back

Used for holding batteries or other components down.  Great addition tool for modeling. Includes: 1 pc : Blue 1/2 x 5 1/2 Velcro Strap

Bundling all of our best beginner items into one Mega Starter Packer.  Enjoy all the common tools & parts used when starting out assembling & building your models.   Kit Includes: Beacon Foam Tac 2oz Glue Angle Meter Prop Band...

Must have hobby knife set for building, repairing or any of your other modeling needs.   Ideal for cutting foam, plastic, wood, wires or even glue!  Includes multiple different shape blades for different tasks. Features: Surgically...

Finally an easy and safe way to install prop saver bands (o-rings) to your out-runner motors.   Simple, yet extremely effective design allows for quick and painless prop saver band install and removals.  Works even on the heavy duty...

Finally an accurate way to set up all your control surface throws on your 3d models.  The Twisted Hobbys Angle-O-Meter is one of the most important tools need to fine tune your models.   Maximize and equal up and down throws, also correct...

Finally an accurate way to set up all your control surface throws on your 3d models.  The Twisted Hobbys Dangle-O-Meter is one of the most important tools need to fine tune your models.   Maximize and equal up and down throws on all...

Storing your airplane safely has never been easier. The Twisted Hooker Mounting kit, designed for most all small profile and larger airplane models.  Made in the USA. Are you running out of room in your hanger?  We know the feeling and have the...

Finally an accurate way to see if your building our favorite Twisted Hobbys EPP Foamie square and true.  Measures 3" on each side, comes with protective tape over square.    

Finally an accurate way to set center of gravity on your favorite Twisted Hobbys EPP Foamie.  CG machine comes unassemblied with protective tape which can be removed before assembly.    

Simply a must have item for your foamies!  One of the biggest power loss issues is an out of balanced prop! High Sensitivity Propeller Balancer, will work with all of our props in house.  Small and light weight unit weighing just under 50g...

Need multiple different size screw drives when building or adjusting your models?  Here is your quick fix easy to use and keep safely stored away for the next use.  Set includes 45 pc's Length Adjustable Shaft Universal direction extensions...

Great tool. A must have product for your tool box!  Aluminum reamer, used for enlarge hole of props, prop hubs or any other holes. Weight: 50.64 / 1.78 oz Hole size: 0-14 mm  Weight = 54g Color may different from the picture shown on the...

Great hand tool when building your models, can cut carbon fiber, solid copper wire or use as a wire stripper. High Carbon Steel Wire Stripping size: .6/.8/1.0/1.3/1.6/2.0/2.6/ (#10-22 Gage)