BY MODEL SIZE

Replacement for 30-32" Lite Series as well as other EPP Models, 8mm wide fiber glass mount with pre-drilled holes.

Replacement for 30-32" Standard EPP Models, 10mm wide fiber glass mount with pre-drilled holes.

Stock replacement Edge V3 Motor Mount for Thrust Vectoring.

Stock replacement Edge V3 Motor Mount for Thrust Vectoring.

Specs: Motor pylon for the Termik model, ideal for 1806 motors The package includes a plywood pylon and 2x M4 screws for attachment to the model Manual: EN: Pylon_manual (1)  

Twisted Hobbys Carbon Fiber upgrade its have set the standard for extreme ultimate HQ hardware parts for the best air-frames in their class.   The Crack Yak-55 XL customers have express the need to go above and beyond the standard hardware and...

Twisted Hobbys Carbon Fiber upgrade its have set the standard for extreme ultimate HQ hardware parts for the best air-frames in their class.   The Crack Yak-55 XL customers have express the need to go above and beyond the standard hardware and...

Twisted Hobbys Carbon Fiber upgrade its have set the standard for extreme ultimate HQ hardware parts for the best air-frames in their class.   The Crack Yak-55 XL customers have express the need to go above and beyond the standard hardware and...

Twisted Hobbys Carbon Fiber upgrade its have set the standard for extreme ultimate HQ hardware parts for the best air-frames in their class.   The Crack Yak-55 XL customers have express the need to go above and beyond the standard hardware and...

Stiff High-Strength Carbon Fiber Rod:  .8mm x 560mm push rods very durable.  Used for Rc factory/Twisted Hobbys EPP model bracing and other assemblies.  Spec's: (1 pc) = .8mm x 560mm  

Stiff High-Strength Carbon Fiber Rod:  1mm x 560mm push rods very durable.  Used for Rc factory/Twisted Hobbys EPP model bracing and other assemblies.  Spec's: (1 pc) = 1mm x 560mm  

Stiff High-Strength Carbon Fiber Short tube:  5mm x 4mm x 330mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies.  Used for larger elevator (Crack Yak-55 XL) Spec's: (1 pc) = 5mm...

Stiff High-Strength Carbon Fiber Short tube:  4mm x 3mm x 330mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies.  Used for full rotating elevator (Revolto) Spec's: (1 pc) = 4mm OD/3mm...

Stiff High-Strength Carbon Fiber Short tube:  3mm x 2mm x 250mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies.  Can be used for the Gee Bee elevator. Spec's: (1 pc) = 3mm OD/2mm ID...

Stiff High-Strength Carbon Fiber Short Rod:  1.5mm x 250mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies Spec's: (1 pc) = 1.5mm x 250mm  

Stiff High-Strength Carbon Fiber Short Rod:  1.8mm x 250mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies Spec's: (1 pc) = 1.8mm x 250mm  

Stiff High-Strength Carbon Fiber Short Rod:  2mm x 250mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies Spec's: (1 pc) = 2mm x 250mm  

Rc Factory Space Adapter White Tube - 2mm OD x 1.2mm ID.  Used for MP Jet connections and or other small adapter size requirements. MP-Use on all the smaller Rc Factory models 35" and smaller. Specs:  4 pc's : White Tube 2mm OD x 1...

These unique snap-in type control link are used similar to z-bend style of control horn connections.  Features: Easy snapped on and off connection Very durable material that is not brittle. Included: 4 pc's = Snap-In Control links...

Rc Factory Small Brass rod connection parts for larger models.  MP-JET brass connectors that come with large models hardware parts to connector .8-1mm carbon fiber push rods to control horns.   Use on all the smaller Rc Factory models...

Rc Factory Med Brass rod connection parts for larger models.  MP-JET brass connectors that come with med to large size models hardware parts to connect 1.5mm carbon fiber push rods to control horns.   Specs: 4 pc's : MP-JET Brass...

Rc Factory Spare parts: MP-JET Ball Link connector kit.   Included: 2 pcs MP-Jet Ball Link Connector 2 pcs MP-Jet 1.5mm Screw

Rc Factory Largest Brass rod connection parts for larger models like the Veloxity, Edge XL, Crack Yak XL and Crack Pitts XL.  MP-JET brass connectors that come with larger models hardware parts to connect 1.8mm carbon fiber push rods to control...

Rc Factory Spare parts: MP-JET horn-link connection kit.  Used for the 36" Flash, 39" Edge 540/Extra 300/Crack Yak-55 and Revolto amount many more models as well as Beaver Float Kit.   Fits 1.8mm carbon fiber rod.   Included: 2...

Hacker Model Spare parts: MP-JET Large horn-link connection kit.  Used for the 48" SUpreme Model as well as other models. Ideal for 1.8-2mm carbon fiber rod.  Brass pin diameter is 1.55mm   Included: 4 pcs MP-Jet Brass clevis...

Design for the 30-32" EPP models and or any other foamie 5oz -11oz. Ideal for a light weigh indoor use can be used for out door use as well. *Drilling, gluing and assembly my be required*        

Rc Factory landing gear 1 piece.  Used for any of the Rc Factory 37-39" Mono and 40" Crack Pitts XL models. Include one piece carbon fiber landing gear.

Rc Factory 42-43" Replacement Carbon-Fiber Landing Gear 1 piece assembly, this is for all newer revised landing gears.  Include a 1 piece carbon fiber landing gear set.   

Replacement EPP Cowl for Gee Bee.  Just like the original each EPP part is high quality printed on both sides. Includes: 1 piece EPP cowl only.  

Replacement EPP Cowl for Gee Bee.  Just like the original each EPP part is high quality printed on both sides. Includes: 1 piece EPP cowl only.

Hacker Models 48" or Rc Factory 42-43" Replacement Carbon-Fiber Landing Gear.  Include a two piece carbon fiber landing gear set.   Comes standard on Hacker Model 48" SUpreme model, can also be used for other models including classic...

Rc Factory 43" Mono model wheels kit replacement parts.   Used for the 43" Crack Yak XL, Veloxity, Edge XL  

RcFactory "Mini Pitts" replacement laser cut horn kits, this is the updated revised horns for snap link assembly version "B" This is the same horns kit that come standard in each 22" models. Designed to work with standard running gear.  

RcFactory's 24" Mini replacement horn kits R2.  Please note these are the newest revised horns designed to work with snap-link control horn assembly.  

Rc Factory replacement 30-32" standard Aileron Differential horn   

RcFactory replacement 30-32" standard horn R2. This is the same horns kit that come standard in each 30-32" Standard Twisted Hobbys/RcFactory models except for MXS-C Model.  Not designed to work with older z-bend contorl horn setup assembly,...

RcFactory replacement Laser / Crack Yak Lite horns, designed to work with snap links.  

Rc Factory Extension horns.  Can be used for any mini or standard size models.   Must be glued to servo horn.   

RcFactory replacement MXS-C Plastic Horn pieces. This is the same horns kit that come standard in each 32" Standard Twisted Hobbys/RcFactory MXS-C models.

RcFactory 35" Beaver replacement laser wood horn kits. This is the same horns kit that come standard in each 35" Twisted Hobbys/RcFactory Beaver Models.  Designed to work with standard running gear.  * Note all new Beaver Horns are designed...