PARTS & UPGRADES

We wanted to create something very strong and durable, most wheels today come with soft foam tires that get destroyed quickly.   Great option for those who would like to fly on hard wear surfaces as well as taxi with more ease.   Can be...

Replacement wheel kit for RcFactory Jabberwocky 

Pre-Order now!  These are manfuactured & fully assemblied here in the USA in small batches.  If not in stock we will ship with in 1-2 weeks.  Introducing the custom designed "Bush Landing Gear Suspension Kit" by Twisted Hobbys. Crafted...

Are you looking for and off road solution to tax, take off and land in deeper grass?  We have the solution!   These training wheel kits are huge, durable and light weight, also a direct replacement for all of the smaller EPP models...

Great setup for smaller models: Details: Package Includes: 1x Steerable Nylon Tail Wheel Assembly High strength nylon tail wheel assembly. High elasticity 25mm wheel. Durable, and suitable for small rear three-point RC Airplane. Item...

Rc Factory replacement CYXL tail wheel assemble kit.  Can be used on multiple other models.  

Twisted Hobbys HD Tail Wheel Assembly Kit, used for 36-48" models.  Removes all worries for wearing down hard stock or EPP tail wing.  Durable and easy to assembly as well as install.   Total weight is 9g. Assembly Photo...

Rc Factory 43" Mono model wheels kit replacement parts.   Used for the 43" Crack Yak XL, Veloxity, Edge XL  

Looking for a solution for your standard wheel pants getting caught in the grass during take off or landing and causing a nose over, or just getting completely ripped off?   There is now an alternative, you don't have to fly with your wheels...

Replacement foam wheels for Mini or Lite series models.  Kit includes: 2 foam wheels   Spec’s: 16mm x 3mm  .1 grams each

Replacement foam wheels for 30-32" Standard series models.  Kit includes: 2 foam wheels   Spec’s:  28mm x 6mm  .7 grams each

Replacement foam wheels EPP models.  Kit includes: 2 foam wheels   Specs: Outer diameter: 40mm Width: 9mm Center hole: 1mm Weight: 1.8g / pc

Replacement foam wheels EPP models.  Kit includes: 2 foam wheels   Specs: Outer diameter: 50mm Width: 10mm Center hole: 2mm Weight: 3.2g / pc  

Great option for those who would like to fly off of higher thicker grass as well as taxi with more ease.   Great for 35-48” models, some modifications may be require depending on axle size and fitment.   Kit includes: 1 wheel and 1...

Having fun with your Crack Turbo Beaver isn't just limited to the land any more!   We welcome the RcFactory Crack Turbo Beaver Float Kit, made of ultra light weight cut foam and utilizing the stock landing gear assembly with additional...

Take Flight on Water!Transform your Piper SC and Step 2 models with the new RC Factory Float Kits. These ultra-lightweight foam floats are designed to be easily assembled and swapped out with the stock landing gear. They come complete with additional...

Take Flight on Water!Transform your Piper SC and Step 2 models with the new RC Factory Float Kits. These ultra-lightweight foam floats are designed to be easily assembled and swapped out with the stock landing gear. They come complete with additional...

Float set for the Fun Master or Master Stick Models also includes a water rudder control assembly, including accessories. Water rudder is controlled with flexible push rod runs from the air rudder servo. Taxiing and take off is more fun and safe with...

RcFactory "Mini Pitts" replacement laser cut horn kits, this is the updated revised horns for snap link assembly version "B" This is the same horns kit that come standard in each 22" models. Designed to work with standard running gear.  

RcFactory's 24" Mini replacement horn kits R2.  Please note these are the newest revised horns designed to work with snap-link control horn assembly.  

Rc Factory replacement 30-32" standard Aileron Differential horn   

RcFactory replacement 30-32" standard horn R2. This is the same horns kit that come standard in each 30-32" Standard Twisted Hobbys/RcFactory models except for MXS-C Model.  Not designed to work with older z-bend contorl horn setup assembly,...

RcFactory replacement Laser / Crack Yak Lite horns, designed to work with snap links.  

RcFactory replacement MXS-C Plastic Horn pieces. This is the same horns kit that come standard in each 32" Standard Twisted Hobbys/RcFactory MXS-C models.

RcFactory 35" Beaver replacement laser wood horn kits. This is the same horns kit that come standard in each 35" Twisted Hobbys/RcFactory Beaver Models.   Designed to work with standard running gear.   

RcFactory replacement Clilk Horn pieces.  

RcFactory replacement plastic 39" horn kit. This is the same horns kit that come standard in each 39" Twisted Hobbys/RcFactory models (Crack-Yak-55, Edge 540, Extra).   

Rc Factory replacement Revo 37" Biplane horns.  

RcFactory replacement plastic 39" Revolto horns. This is the same horns kit that come standard in each 39" Twisted Hobbys/RcFactory models (Revolto).  

RcFactory Raptor Spare Parts Kit: Used for the 22-23" Cartoon Series warbirds.   

RcFactory Raptor Spare Parts Kit: Used for the 22" Gripen F-22 EPP Jet.  This is the replacement accessories that comes with each 22"  EPP Gripen Jet model.

RcFactory Raptor Spare Parts Kit: Used for the 29" Raptor F-22 EPP Jet.  This is the replacement accessories that comes with each 29"  EPP Raptor Jet model.

RcFactory Mini Pitts Spare Parts Kit "B": Used for the 22" Mini Pitts Hardware accessories kit.   This is the replacement accessories that comes with each 22" Mini Crack Pitts EPP models, Version "B" include adjustable end link assembly to...

RcFactory Mini mono model hardware bag kit, please note this kit is for the newest 24" Mini mono hardware which includes the snap-in link assembly construction.  Works for Mini Edge 540, Mini Crack Yak-55 and Mini MXS-C

RcFactory Crack Wing Spare Parts Kit: Used for the 30" Crack Wing.  This is the replacement accessories that comes with each 30" Crack Wing EPP model.

RcFactory Spare Part 30" Crack-Series Pitts Biplane Hardware accessories kit this is for Snap-Link connection construction.    Includes carbon fiber aileron push rods, gang horns, wood strut pieces, adjustable end links w/ locking ring...

RcFactory Spare Part 30" Bucker Jungmeister Biplane Hardware accessories kit.  

Hacker Models Spare Part 30" PittsBull Biplane Hardware accessories kit.    All small parts hardware included.

RcFactory Spare Parts Kit: Used for all of the 31" Racer Series 31" EPP Models.

RcFactory Spare Parts Kit: Used for: 32" Standard Yak-55 EPP Models.  Not for 32" Crack Yak-55 or other standard classic mono models, this is the correct hardware link for them: