Flight Controllers / FPV gear

This is a 3D-printed base (made from ABS) for the Flex Innovations FT Aura 5 Lite ultra light weight holder/mount.  Created by TH team for an easy clip in solution. Spec's: 1.7g total weight Mentioned for light weight foamie models  

RcGroups tech information thread.    For plug and play setup we recommend purchasing a DSMX satellite receiver, otherwise you will be required to use a DSMX receiver and will require programming. The FT Aura 5 Lite was created through a...

Created just for the POTENZA AURA 8 flight controller.   Snap in design allows for easy install and removal of flight controller.  

The Aura 8 is the an advanced flight control system for fixed wing aircraft. It Is very lightweight and compatible with all major radio brands. You no longer need to spend a fortune, nor be restricted to specific radio types to experience state of the...

The RunCam Split Mini 2 is an amazing FPV/HD recording camera that allows you to capture crystal clear 1080p video at 60fps without the need for a bulky action camera. The Split Mini 2 keeps the same small camera form factor (19x19) as the original Split...

The Runcam Micro Swift 2 FPV Camera is the world's smallest and lightest CCD camera. Weighing a mere 5.60 grams (0.20 ounces), it is lighter than most camera lenses! And, it does all of this while still offering the same superb video quality that Runcam...

This is the second generation of the TOP RC Hobby Spotter, just like before this is a micro 2 in 1 FPV camera and video transmitter. The Spotter V2 now comes in a hard exterior case and OSD function. The OSD will provide voltage data on your power pack...

2019 New Aomway Commander Goggles V1S 2D 3D 64CH 5.8G FPV Video Headset Support HDMI  720p DVR Headtracker   Commander V1S goggles is well‐equipped with a pair of 16 to 9 WVGA LCD micro displays (FOV as 32 degrees) for...

This FPV conversion set will let you transform your Step One model into a remotely controlled FPV drone. With the help of our FPV equipment, you may virtually sit down in the cockpit of your model and fly out to enjoy the beauty of the countryside...

This alternative canopy will let you change your Step One model into a remotely controlled FPV drone. With the help of our recommended FPV equipment, you may virtually sit down in the cockpit of your model and fly out to enjoy the beauty of the...

Need a great FVP Goggles Headset, then here is the Aomway FPV VR Goggles V1 5.8G 40CH 800x480 5 Inch for all your FPV needs.  FeaturesWith AVIN AVOUT and Earphone.NTSC/PAL auto switchBuild in high sensitivity 40CH 5.8G receiverBuild in high-powered...

Searching for the ultimate HQ FPV Micro camera for your Twisted Hobbys or other aircraft?  We have the solution for you with the FX798T Micro FPV Camera, its small, durable and easy to use.  Now with even higher resolution, don’t be...

Description: Brand Name: Aomway Item Name: 5.8GHz FPV 4 Leaf Clover RHCP Antenna Color: Blue, Red  Connector: SMA Male, RP-SMA Male Frequency: 5.8GHz Gain: 3dbi SWR: <1.5 Omnidirectional, high efficiency Size :85mm x 25mm Weight : 8g  Suit...

5-pack bulk easy to open packaging Up to 48MB/s read, up to 20MB/s write in UHS-I mode Class 10, UHS-1 performance allows fast and smooth continuous shooting, multiple frames per second and full HD video capture Fast performance minimizes photo...

MG25 Flight controller for Multi rotors Support AV241,QAV250, 450, 460, and etc quad rotors, Support Autolevel mode, and Manual mode 102501 MG25 Flight Controller for Quad rotors. MG25 flight controller is a precision designed specifically for mini quad...

1. Features: NX3evo provides four different levels of flight modes: 1, Beginner 2, Practice 3, Advanced 4, Expert. Four wing types: Single (Dual ailerons)/Delta wing/V-tail. Separate gain adjustment for each axis Single/Separate Dual ailerons...

Need to see where your racing!  These are perfect for FPV race courses, includes 24 pc's of white arrow made from corrugated plastic.