BEACON FOAM TAC - 1 oz. TUBE - EPP Models
- SKU:
- Foam TAC 1oz Tube
- MPN:
- FoamTac 1oz tube
- Condition:
- New
- Bulk Pricing:
- Buy in bulk and save
Description
Key features why Twisted Hobbys uses Beacon Foam tac glues on all EPP models:
- Foam-Tac never yellows or becomes brittle.
- Very low odor, no fumes.
- Dries fast and crystal clear.
- Never foams or expands or needs a kicker.
- Remains flexible. Glue joints flex with the foam, preventing separation from hard impacts.
- Long shelf life –up to 2 years if properly stored away from heat and with white cap replaced. If white cap is lost, remove applicator cap and put a small piece of aluminum foil over the opening and then replace the applicator. Store at room temperature.
- No need to store in the fridge or freezer.
- Works on ALL types of foam including Depron, EPP, EPO, Styrofoam, insulating foam, and even florist’s foam, as well as with balsa wood and carbon fiber.
- Great for waterproofing.
Note: How much glue per model? We recommend at least (1) 1 oz for all smaller models, and (2) 1 oz tubes for all 35" and larger models.
40 Reviews
-
Excellent glue for building or repairing foam models
This glue works very well. It sets up quickly so you can continue to build without waiting a long time It is very strong and stays flexible and clear. Another very nice feature is it is fairly thick so as to not run everywhere, but not so thick as to take forever to get to the spout when you are nearing the bottom of the bottle.
-
Foam tac glue
Great product. Works just like welders but in a much better package I think.
-
Works as advertised
I have always been skeptical about any adhesives other than CA for epp foam. This product sets up and holds well. It is stronger than the foam when cured. It is not dangerous or allergy prone like CA.
-
Awesome glue...a must for your build
I used this on my TH fokker tri plane and it was great. Following the directions this stuff bonds up nice and makes for a very strong glue joint. In my opinion a must to put these epp planes together .
-
The only glue for all your foam planes
Simple put: will not yellow, will harden and release, continues to work for years to come while staying flexible and tough. Fast to setup and hold. Built my Crack Big Beaver in 2 evenings and only because I had to get some sleep before work each day.Simply the best. (Forget Welders, use Foam Tac all the time!). Get extra and fix your other non-EPP foam plans when you have that oops moment.
-
Just another thumbs up review
Sets in 30min, cures in 12hrs, doesn't turn yellow or smell strong, what more can you ask for? I have yet to have my EPP foam break at a glue joint using foam tac.
-
Foam Tac
This glue is the best for a couple reasons. You can build your model a little quicker than you probably would with Welder and it will not turn yellow or become brittle over time.
-
Foam-TAC
Works great. Perfect for EPP models with great drying time--not too fast and not too slow. Great container making it less messy to work with compared to Welders (that is also a great adhesive).
-
Non Yellowing Glue
Began using this glue about 18 months ago. Glue holds well and doesn't yellow over time. Easy to use
-
Great glue
No smell built my mini edge with this glue.
Related Products
CEC CORP - C-BOND - THICK CA Glue 1 oz
CEC CORP - C-BOND - Thin CA glue 1 oz
CEC CORP - Instant Plastic CA Glue 1 oz
CEC CORP - 30 Minute Epoxy 4.25oz
3m Blenderm Tape 1"
C-Tip - CA Glue Applicator Noles (5 pcs)
Twisted Hobbys Velcro Strap Blue 140mm
