32" Lite Model

Replacement for 30-32" Lite Series as well as other EPP Models, 8mm wide fiber glass mount with pre-drilled holes.

Specs: Motor pylon for the Termik model, ideal for 1806 motors The package includes a plywood pylon and 2x M4 screws for attachment to the model Manual: EN: Pylon_manual (1)  

These unique snap-in type control link are used similar to z-bend style of control horn connections.  Features: Easy snapped on and off connection Very durable material that is not brittle. Included: 10 pc's = Snap-In Control links Assembly...

Rc Factory Spare parts: MP-JET Ball Link connector kit.   Included: 10 pcs MP-Jet Ball Link Connector 10 pcs MP-Jet 1.5mm Screw

Rc Factory Spare parts: MP-JET horn-link connection kit.  Used for the 36" Flash, 39" Edge 540/Extra 300/Crack Yak-55 and Revolto amount many more models as well as Beaver Float Kit.   Fits 1.8mm carbon fiber rod.   Included: 2...

Rc Factory Small Brass rod connection parts for larger models.  MP-JET brass connectors that come with large models hardware parts to connector .8-1mm carbon fiber push rods to control horns.   Use on all the smaller Rc Factory models 35"...

Rc Factory Med Brass rod connection parts for larger models.  MP-JET brass connectors that come with med to large size models hardware parts to connect 1.5mm carbon fiber push rods to control horns.   Specs: 4 pc's : MP-JET Brass Med...

10 pc's pack of push rod standoff (guides) with 1.50mm hole diameter and18mm height.  These are used to support the long push rods from the servos arm to the control surface horns.  

Stiff High-Strength Carbon Fiber Rod:  .8mm x 560mm push rods very durable.  Used for Rc factory/Twisted Hobbys EPP model bracing and other assemblies.  Spec's: (1 pc) = .8mm x 560mm  

Stiff High-Strength Carbon Fiber Rod:  1mm x 560mm push rods very durable.  Used for Rc factory/Twisted Hobbys EPP model bracing and other assemblies.  Spec's: (1 pc) = 1mm x 560mm  

Stiff High-Strength Carbon Fiber Short Rod:  1.5mm x 250mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies Spec's: (1 pc) = 1.5mm x 250mm  

Stiff High-Strength Carbon Fiber Short Rod:  1.8mm x 250mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies Spec's: (1 pc) = 1.8mm x 250mm  

Used for all 1mm carbon fiber rod guys, can be bent and shaped.  1mm rod is used inside for push rods.    Spec's: (2 pc) = 1mm hole dia x 200mm length (8")

Stiff High-Strength Carbon Fiber Short Rod:  2mm x 250mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies Spec's: (1 pc) = 2mm x 250mm  

Design for the 30-32" EPP models and or any other foamie 5oz -11oz. Ideal for a light weigh indoor use can be used for out door use as well. *Drilling, gluing and assembly my be required*        

Design for the 30-32" RcFactory/Hacker and any other foamie 5oz -11oz. Ideal for indoor/outdoor use. Each kit contains a set of lightweight carbon-fiber landing gear, g10 fuselage supports, g10 spats support strips, EPP spats and lightweight wheels and...

Rc Factory landing gear 1 piece.  Used for any of the Rc Factory 37-39" Mono and 45" Jabberwocky models.   Includes: One piece carbon fiber landing gear.

Rc Factory landing gear 1 piece.     Includes:  One piece carbon fiber landing gear.   Used for any of the Rc Factory Step 2 & Piper SC models. 

Rc Factory landing gear 1 piece.  Used for any of the Rc Factory Crack Pitts XL & Air Truck models.    Includes:  One piece carbon fiber landing gear.

Rc Factory 40-43" Replacement Carbon-Fiber Landing Gear Verison 1.    Include a 1 piece carbon fiber landing gear set.  Used for Version 1 (orignal) Veloxity Edge 540 XL Crack Yak-55 XL (ver 1)

Rc Factory 40-43" models with Verision 2 landing gear assemble, this is for all newer revised landing gears.  Include a 1 piece carbon fiber landing gear set.  Used for V2 Landing Gear Models. Laser XL Crack Yak XL (Version 2) Other...

Rc Factory 39" Replacement landing gear straps.  

Rc Factory 40-43" Replacement landing gear straps.  Designed to work for with "Version 1"  42-43" Mono Series Models Version, not to be used with Version 2 landing gear/models.

Rc Factory 40-43" Replacement landing gear straps.  Designed to work for with "Version 2"  40-43" Series Models Version 2, not to be used with Version 1 landing gear/models.  This is shorter in length than version 1

Pre-Order now!  These are manfuactured & fully assemblied here in the USA in small batches.  If not in stock we will ship with in 1-2 weeks.  Introducing the custom designed "Bush Landing Gear Suspension Kit" by Twisted Hobbys. Crafted...

Are you looking for and off road solution to tax, take off and land in deeper grass?  We have the solution!   These training wheel kits are huge, durable and light weight, also a direct replacement for all of the smaller EPP models...

Twisted Hobbys HD Tail Wheel Assembly Kit, used for 36-48" models.  Removes all worries for wearing down hard stock or EPP tail wing.  Durable and easy to assembly as well as install.   Total weight is 9g. Assembly Photo...

Replacement foam wheels for Mini or Lite series models.  Kit includes: 2 foam wheels   Spec’s: 16mm x 3mm  .1 grams each

Replacement foam wheels for 30-32" Standard series models.  Kit includes: 2 foam wheels   Spec’s:  28mm x 6mm  .7 grams each

RcFactory replacement Laser / Crack Yak Lite horns, designed to work with snap links.  

RcFactory Spare Parts Kit: Used for the 32" Lite Series Hardware accessories kit.   This is the replacement accessories that comes with each 32" Crack Yak-55 Lite EPP models.

RcFactory Spare Parts Kit: Used for the 32" Laser Lite-Series Hardware accessories kit with the newest hardware including snap link assembly.  

Hacker Models Spare Part 32" Laser 230 Hardware accessories kit.    All small parts hardware bag included.