RcGroups tech information thread.    For plug and play setup we recommend purchasing a DSMX satellite receiver, otherwise you will be required to use a DSMX receiver and will require programming. The FT Aura 5 Lite was created through a...

Created just for the POTENZA AURA 8 flight controller.   Snap in design allows for easy install and removal of flight controller.  

The Aura 8 is the an advanced flight control system for fixed wing aircraft. It Is very lightweight and compatible with all major radio brands. You no longer need to spend a fortune, nor be restricted to specific radio types to experience state of the...

Stimulate your imagination with our smallest radio ever. Packed with features, the Graupner mz-4 is a 2-channel 2.4GHz HoTT stick radio specially designed for controlling Graupner Vector power units and Vector models.  Easy to operate, all controls...

It is a sunny day but cold weather and you want to fly. Your fingers will no be frozen with our RC BAG! It is waterproof and your transmitter and your hands will be inside like in living room. And you can fly for a long time and your hands are still O.K...

These are micro components used for powering the Baby Step one model.  Soldering as well as micro building and assembling is required with these power system.  This is not plug and play system, system requires soldering and programming...

Jinqiang JQ-2118 Adhesive Glue is a low cost solution and alternative to some of the higher priced EPP adhesive glue offerings   In our testing it works very similar to Welders & Beacon Adhesive glues.  Like all adhesive...

Expect the freshest Beacon Foam Tac glue(s) from Twisted Hobbys due to high turn over.  New redesigned tube and cap!  Great alternative to Welder Adhesive glue and CA glues when building your EPP models.  FOAM-TAC’S improved...

CEC-CORP C-Bond Thin is a low viscosity general purpose instant/cyanoacrylate glue. This glue comes with an anti-clog cap and has a 5-10 second cure time. C-BOND Thin has good penetration for fitting smooth surfaces. It can bond rubber, plastics,...

CEC-CORP C-BOND Thick is a high viscosity general purpose instant/cyanoacrylate glue. This glue comes with and anti-clog cap and has a 15-30 second cure time. Provides outstanding adhesion for porous surfaces and large gaps and could be used with a...

C-Set is a Super Glue Accelerator, also known as a glue “activator”. It is used to speed up the drying time of cyanoacrylate super glues. The accelerator is a solvent-based product that can be applied before and/or after the glue application...

CEC-CORP Instant Glue Plastic has low Viscosity and fast cure time even under low humidity conditions. It is designed for bonding Hard/Soft Plastics and Rubber, metal, ceramic and glass.  Cyanoacrylate glue is the industrial name for what...

C-POXY 30 4.25oz kit, is a general purpose fast setting epoxy adhesive. Recommended for bonding metal, ceramics, stone, glass, concrete, wood, fiberglass and many plastics such as polyester, ABS and rigid PVC (not suitable for PTFE-PP-PE and rubbers)...

Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the...

INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from...

Blenderm tape is one of the best know tapes used for hinging and repairing your Depron or Epp models. Each 3M Blenderm key features are its high strength adhesive, extremely flexible and long lasting.   Each roll consists of 1" wide...

CEC-CORP Tips contains 5 nozzles. C-TIP is used for applying low viscosity Cyanoacrylate or instant glues to the finest cracks and gaps. The small nozzle can increase accuracy and provide more control in glue application.   Contains 5 nozzles...

Twisted Hobbys 39" CNC cut solid carbon fiber motor mount with hardware.  Designed specifically to work with the as well as other similar size models  These are super thick includes mount hardware to be used with stock running gear and setup...

Twisted Hobbys 42-43" CNC cut solid carbon fiber motor mount.  Designed specifically to work with the Twisted Hobbys   These are super thick includes mount hardware to be used with stock running gear and setup on all 42-43" Twisted...

It doesn't get more detailed then this guys, upgrade it to the max!!! Our new Crack Mini Series Fiber Upgrade Hardware Kit design for the 22" Mini Pitts EPP models for the extremist wanting no compromise for their EPP models!!!  (Can also be used on...

It doesn't get more detailed then this guys, upgrade it to the max!!! Our new Crack Series Mini Mono Planes Fiber Upgrade Hardware Kits are design for the 24" Mini EPP models for the extremist wanting no compromise for their EPP models!!!  (Can also...

It doesn't get more detailed then this guys, upgrade your 29" EPP Raptor Jet to the max!!! Our new Crack Carbon Fiber Upgrade Kits are design for all the 29" Raptor Jet EPP models. With excellent tensile strength and precision machined made in the USA...

It doesn't get more comprehensive then this guys, upgrade it to the max!!! Our new Crack Series 30" Pitts Carbon Fiber Upgrade Hardware Kits are design to work directly with RcF 30" EPP Pitts M12 Standard (Back Yard Series) Biplane models for the...

It doesn't get more comprehensive then this guys, upgrade it to the max!!! Our new Crack Series 30" PittsBULL Carbon Fiber Upgrade Hardware Kits are design to work directly with Hacker Models 30" EPP PittsBULL (Super Lite Series) Biplane models for the...

It doesn't get more detailed then this guys, upgrade your Crack Wing to the max!!! Our new Crack Wing Series Fiber Upgrade Hardware Kits are design for all the 30" Crack Wing Series EPP models. With excellent tensile strength and precision machined made...

It doesn't get more detailed and specialized then this guys, upgrade your 31" EPP Racer model to the max!!! Our new Crack Carbon Fiber Upgrade Kits are design for all the 31" Racer EPP models. With excellent tensile strength and precision machined made...

These new Carbon Fiber Upgrade Hardware Kits are design for your all 32" Standard models EPP models (EXCEPT FOR MXS-C) for the extremist wanted no compromise for their EPP models!!!  (Can also be used on any 9-10mm EPP foamies) With excellent...

These new Carbon Fiber Upgrade Hardware Kits are design for the 32" MXS-C Standard EPP models for the extremist wanted no compromise for thier EPP models!!!  (Can also be used on any 9-10mm EPP foamies) With excellent tensile strength and precision...

It doesn't get more comprehensive then this guys, upgrade it to the max!!! Our new Crack Series Lite Carbon Fiber Upgrade Hardware Kits are design for the 32" Lite Series EPP models for the extremist wanting no compromise for their EPP models!!! ...

It doesn't get more comprehensive then this guys, upgrade it to the max!!! Our new Crack Series Super Lite Carbon Fiber Upgrade Hardware Kits are design for the 32" Super Lite Crack Yak-55 EPP models though can be used for other super like...

It doesn't get more comprehensive then this guys, upgrade it to the max!!! Our new Crack Series Super Lite Edge 540 and Extra 330 V3 Carbon Fiber Upgrade Hardware Kits are design for the EPP Edge 540 and Extra 330 V3 Super Lite Series models . for the...

It doesn't get more comprehensive then this guys, upgrade it to the max!!! Crack Series Clik Super Lite Carbon Fiber Upgrade Hardware Kits are design for the EPP Click NG, R2 and 21 also will work with the Synergy Super Lite Series models. These are for...

These new Carbon Fiber Upgrade Hardware Kits are design for your 35" Fokker models EPP models for the extremist wanted no compromise for their EPP models!!!  With excellent tensile strength and precision machined made in the USA these are carbon...

These new Carbon Fiber Upgrade Hardware Kits are design for your 35" Beaver models EPP models for the extremist wanted no compromise for their EPP models!!!  (Can also be used on any 9-10mm EPP foamies) With excellent tensile strength and precision...

It doesn't get more comprehensive then this guys, upgrade it to the max!!! Our new 39" Edge 540 / Extra / Crack-Yak-55 Carbon Fiber Upgrade Hardware Kits are design for the 39" Edge , Extra and Crack Yak-55 RcFactory EPP models for the extremist wanting...

It doesn't get more comprehensive then this guys, upgrade it to the max!!! Our new Rc Factory 39" Crack Yak-55 and Edge 540 / Extra Class Series not V3 Carbon Fiber Upgrade Hardware Kits are specifically designed for the Rc Factory 39" Edge , Extra...

It doesn't get more comprehensive then this guys, upgrade it to the max!!! Our new Hacker 39" Edge 540 V3 Carbon Fiber Upgrade Hardware Kits are design for the Hacker 39" Edge 540 V3 models for the extremist wanting no compromise for their EPP...

Great for indoor and out door EPP models! *Remember always check prop balance before flying*  Color may vary between Orange or Black.     

Great for indoor and out door EPP models!  *Remember always check prop balance before flying*  Color may vary. 

Tired of your GWS props bending on the first prop strike well we have the props for you!  *We highly recommend proper prop balancing before flying* Please note if running 3s with the 8x4.3 props HD prop savers are required also balancing is a...