Keep things looking sharp, light and your electronics cooler with these hollowed spinner.   These 51mm Air-Flow spinners have a backplate that is 51mm (2 inches) in diameter with an overall length of 46.6mm (1.83 inches).  Backplates...

These are the direct replacement Collect/Prop Adapter 3.17mm shaft out-runner motors.   Prop thread diameter = 5mm +/- .025

These are the direct replacement Collect/Prop Adapter 4mm shaft out runner motors Hub (motor shaft) diameter = 4mm Prop thread diameter = 6mm +/- .025 Mixed colored:

The SkyRC X1806 2300KV is a compact and efficient brushless motor, perfect for small to medium-sized multirotors and lightweight airplane models. Crafted with high-quality materials and precision engineering, this motor delivers smooth performance with...

M Force 2826CA-11 KV 1500 brushless electromotor.  Used for Hacker Models  Warbirds 840mm, Zoom 4D, Super Zoom or Rescuse Boat. Recommended ESC: MC-22A / CS-35A Reversible ESC used with props 8 x 4 - 9 x 5 Includes: 1 x electromotor with...

Finally an easy and safe way to install prop saver bands (o-rings) to your out-runner motors.   Simple, yet extremely effective design allows for quick and painless prop saver band install and removals.  Works even on the heavy duty...

Must have hobby knife set for building, repairing or any of your other modeling needs.   Ideal for cutting foam, plastic, wood, wires or even glue!  Includes multiple different shape blades for different tasks.   Excel Blades...

Finally an accurate way to set up all your control surface throws on your 3d models.  The Twisted Hobbys Angle-O-Meter is one of the most important tools need to fine tune your models.   Maximize and equal up and down throws, also...

Perfect depth control for creating carbon fiber slots for you EPP models.   Twisted Hobbys came up with another great tool that will last you a life time.   Easy to set your exact depth and easily slide over a ruler making the...

Finally an accurate way to see if your building our favorite Twisted Hobbys EPP Foamie square and true.  Measures 3" on each side, comes with protective tape over square.    

Finally an accurate way to set up all your control surface throws on your 3d models.  The Twisted Hobbys Dangle-O-Meter is one of the most important tools need to fine tune your models.   Maximize and equal up and down throws on all...

Made in the USA!!!  Introducing Ultra Halo's Light Stick's, cutting-edge LED emitter products: versatile, featherweight, low-power, rugged, and exceptionally bright. We're thrilled to announce the arrival of www.UltraHalo.com's premium LED...

Finally an accurate way to set center of gravity on your favorite Twisted Hobbys EPP Foamie.  CG machine comes unassemblied with protective tape which can be removed before assembly.  * If standard CG measurements aren't possible due to the...

Made in the USA!!!  Introducing Ultra Halo's Light Stick's, cutting-edge LED emitter products: versatile, featherweight, low-power, rugged, and exceptionally bright. We're thrilled to announce the arrival of www.UltraHalo.com's premium LED...

Best way to never forgot your CG locations!  Easy to peal and stick on your model.  Kit includes 4 cg stickers.       

Another great tool for easy caring, Twisted Hobbys new reference card allows for quick measurments.   Made from Alum and includes a plastic protective pouch.    

Storing your airplane safely has never been easier. The Twisted Hooker Mounting kit, designed for most all small profile and larger airplane models.  Made in the USA. Are you running out of room in your hanger?  We know the feeling and have the...

Simply yet must have item for your foamies at home or at the field!  One of the biggest power loss issues is an out of balanced prop! High Sensitivity Propeller Balancer, will work with all of our props in house. Ideal for 2-blade propeller less...

20 pc's plastic wire staples, great product for holding down wires for electronics, also used for LED kits.

Used for holding batteries, receivers, esc's or other components down.  Great addition for modeling. Includes: 2 pc (Male & Female) : Black 1" x 4" Velcro Hook & Loop sticky back  

Used for holding batteries or other components down.  Great addition tool for modeling. Includes: 1 pc : Blue 1/2 x 5 1/2 Velcro Strap

Ideal for opening up small holes while building your models.  This is a light duty kit for quick repairs as such. Great for small hobby building models. Includes: 25 pc's HSS Micro Twist Drill Bits: (5pcs X 0.5mm, 5pcs X 0.6mm, 3pcs...

Great tool. A must have product for your tool box!  Aluminum reamer, used for enlarge hole of props, prop hubs or any other holes. Spec's:Weight: 50.64 / 1.78 ozHole size: 0-14 mm Weight = 54gColor may different from the picture shown on the...

One of the most unique little tools we've come across.  Holds multiple different sized screw driver bits in its pen which is used to hold each bit when using.  Magnet nose holder holds bits in place so they do not fall out.  Great for...

FLAT HEAD Screwdriver Tool Set: Includes: 3.0mm 4.0mm 5.0mm 5.8mm

Phillips Screwdriver Tool Set: Includes: 3.0mm 4.0mm 5.0mm 5.8mm

Need multiple different size screw drives when building or adjusting your models?  Here is your quick fix easy to use and keep safely stored away for the next use.  Screw Driver set includes 45 pc's Length Adjustable Shaft Universal...

Great hand tool when building your models, cutting small carbon fiber rods or even plastics.  Recommended for 1.5mm or smaller Includes: 1 x Scissors

Great hand tool when building your models, cutting small parts or foam with ease. Includes: 1 x Scissors

Stainless steal ultra-sharp HD shears/scissors. Great handy tool for cutting larger thinner items Includes: 1 x HD Scissors    

Excel Blades Serrated Long Nose Pliers Excel Blades Serrated Long Nose Pliers Made of stainless steel Plastic grip handles designed for ultimate comfort and a secure grip Spring-loaded technology helps reduce hand cramping and fatigue. Allows...

Great hand tool when building your models, can cut carbon fiber, solid copper wire or use as a wire stripper. High Carbon Steel Wire Stripping size: .6/.8/1.0/1.3/1.6/2.0/2.6/ (#10-22 Gage)

When needed to measuring drills or carbon fiber rods/square parts one must have a quality tool then look no further!   High quality tools are are very important to Twisted Hobbys since we use them ourselves when building our models as well for...

When needed to measuring exact weights, ideal for those that are flying indoors and building ultra light weight aircrafts!  Accuracy and portability - Quantity accumulative & counting function- Low voltage & overload prompt- HD backlit...

Fits all 22-35" EPP models depending on location of mounting. Now you can fly when the sun goes down! TH Small Led Kits are fully pre-assembled ready to plug directly into your receiver which give you a true plug and play kits with out the hassle...

Joysway 90A Water Cooled ESC with BEC (Alpha) 92035 Specifications Connectors 6mm HD (Inc.) B.E.C. (Voltage/Amps) 6V 3A Max. Continuous Current (Amps) 90A LiPo 2-6S

Joysway BL2815 Brushless Motor 830107 used for Bullet as well as other models

This is a Joysway J2C93 2.4ghz 2CH Transmitter 930518. This is a off-market item that offers simple functionality. It has been tested and functions normally. Also will would work well for surface vehicles such as 1/10 crawlers or other models.  

This is a Joysway 4ghz 2CH Receiver 930519. This is a off-market item that offers simple functionality. It has been tested and functions normally. Also will would work well for surface vehicles such as 1/10 crawlers or other models.    

Joysway CNC Aluminum Alloy Rudder With Plastic Rudder Support Set) 890116