ELECTRONICS
-
Outrunner 2217-1170KV 70g "Crack Series Pro" Motor
$59.99The Twisted Hobbys Crack Series Pro 2217 70g 1170KV motor is an excellent choice for you 22-32oz model. Newly revised and updated design for even lower weight yet more power. While lowering watts and amps output surprisingly we...$59.99 -
Outrunner 2814 1050KV 100g "Crack Series Pro" Motor
$64.99The Twisted Hobbys Crack Series Pro "CSP" 2814-1050KV 100g motor is an excellent choice for your 42-48" models or any other 22-32oz model. Newly revised and updated design for even lower weight yet more power. While lowering watts and amps...$64.99 -
Crack-Series Pro Small Flange Base Motors - Hardware Bag
$6.99Hardware replacement kit that comes with all Crack Series Pro small flange based (2202,2203,2206,2305) out-runner motors. Included 4pc's 5.5 to 7mm prop hub adapters, 4 mounting screws and 4 o-rings.$6.99 -
Crack-Series Small Flange Base Motors - Classic - Hardware Bag
$6.25These are the classic series original hardware bags that came standard with our 2202/2203/2206 Crack Series motors. Included two different prop hub adapter a 7mm and 8mm, 4 mounting screws and 2 o-rings.$6.25 -
Prop-Saver Bands "Thin Duty" (5)
$4.25Not your ordinary over-the-counter O-ring, great replacement 1/16" thick standard bands ideal for running stock setup systems (ideal for mini or any 2s setups). ( 5 O-rings included ).$4.25 -
Prop-Saver Bands "Standard Duty" (5)
$4.99Not your ordinary over-the-counter O-ring, great replacement 3/32" thick standard bands ideal for running stock setup systems running 2s! Great replacements for our 14-30g out-runner prop savers o-rings. These o-rings were made to...$4.99 -
Prop-Saver Bands HD "Heavy Duty" (5)
$5.99Not your ordinary over-the-counter O-ring, heavy duty 1/8" thick ideal for running 3s setups! Great replacements for our 24-30g out-runner prop savers o-rings. These o-rings were made to handle all the stresses you can throw it them...$5.99 -
Outrunner 2212 CSP/TWM Prop Adapter & Flange mount
$9.99Used for All Crack Series Prop and TMW 2212 series motors. Prop Adapter bolt on style mounted opposite side of the shaft (reverse mounting) also now includes mounting flange mount screws. This is the stock part that comes with the 2212...$9.99 -
Outrunner CSP 2217 (70g motor) prop hub
$9.99Crack Series Prop and TMW 2217 replacement 5mm front prop hub assembly with screw kit. Includes motor mount, prop hub adapter, mounting screws, prop hub and washer. Used for Crack Series Pro and TMW 70-78g motors.$9.99 -
Outrunner 2814 100g CSP prop hub replacement kit
$12.99TMW & Crack Series Pro 2814 complete replacement hardware bag. Included 6mm front prop hub adapter, mounting screws (front and back), flange mount, prop hub locking nut and washer.$12.99 -
Motor Mount- Quad rear mount to airplane flange adapter kit -Alum
$12.99Great way to run a standard quad motor to a standard flange mount style. Mount is made from Alum which is very strong and is a great heat conductor, also mount motor mounting screws are countersunk for no interference this kit sits flat and true...$12.99 -
Outrunner 3.17mm Prop Adapter/Collet "Small"
$4.50These are the direct replacement Collect/Prop Adapter 3.17mm shaft out-runner motors. Prop thread diameter = 5mm +/- .025$4.50