Outrunner 2814 1050KV 100g "Crack Series Pro" Motor
- 100g 2814-1050kv CSP
- CSP 100g 2814-1050kv
- Bulk Pricing:
- Buy in bulk and save
The Twisted Hobbys Crack Series Pro "CSP" 2814-1050KV 100g motor is an excellent choice for your 42-48" models or any other 22-32oz model. Newly revised and updated design for even lower weight yet more power. While lowering watts and amps output surprisingly we were able to increasing thrust showing some extreme efficiency and how well these motors outperform the rest! Without breaking a sweat the new CSP out runners will easily achieve great vertical performance on any of our smaller park flyer models.
Our goal was to create the most powerful, better balanced, higher accelerating motor along with the highest quality components manufactured to Twisted Hobbys spec's. Quality without compromise! There is no mistaking the quality, reliability and overall performance of our Crack Series out runner motors. Tested, proven to outlast and provide you with endless flights!
- 12" E props w/ 3s
- 11" E props w/ 4s
- Weight: 100g
- Propeller size: 12x3.8sf/12x6/13x6.5 E Prop
- Case diameter: 35mm
- Case length: 34.1mm
- Shaft diameter: 4 mm
- RPM per Volt (KV): 1000
- Li-Po cells: 3-6 cells
- 40 Amps: Max Burst Amps = 65+
- Watts: 450 : Max = 650 / 90oz thrust
- Motor Mount = 30.5mm x 30.5mm which works perfectly with Twisted Hobbys Alum Motor Mounts.
- 6mm hub shaft
- Front and rear prop mounting setups, 3.5mm pre-soldered bullet connects are also completed for quick and easy installation.
Impressed with this little guy first time using the recommended 12x45 prop also very powerful pull out power. I liked how it worked with the alum mount and balanced came out surprisingly spot on for my Yak xl.