Replacement for 30-32" Lite Series as well as other EPP Models, 8mm wide fiber glass mount with pre-drilled holes.
Replacement for 30-32" Standard EPP Models, 10mm wide fiber glass mount with pre-drilled holes.
Stock replacement Edge V3 Motor Mount for Thrust Vectoring.
That's right guys finally we have a adjustable control surface end-links that is very light weight, strong yet rigid by designed for no play or slop you desire. Each weighing only a 1/4 of a gram!!!! These end-links work with all standard servo...
Used as another option to hold adjustable end-links to control horns instead of the tiny black factory ring-clips. They are an easy on/off rear type of connection to the adjustable end-links. * These are an alternative to the factory black...
High-Strength Carbon Fiber with filler mixed control rod: 1mm x 500mm push rods very durable which does have some flex. Used for Rcfactory/Twisted Hobbys EPP model push rods that used 1mm thin rods. Can be used with Mini Models and...
Stiff High-Strength Carbon Fiber Rod: .8mm x 560mm push rods very durable. Used for Rc factory/Twisted Hobbys EPP model bracing and other assemblies. Spec's: (1 pc) = .8mm x 560mm
Stiff High-Strength Carbon Fiber Rod: 1mm x 560mm push rods very durable. Used for Rc factory/Twisted Hobbys EPP model bracing and other assemblies. Spec's: (1 pc) = 1mm x 560mm
These unique snap-in type control link are used similar to z-bend style of control horn connections.
Easy snapped on and off connection
Very durable material that is not brittle.
4 pc's = Snap-In Control links...
Rc Factory Spare parts: MP-JET Ball Link connector kit. Included: 2 pcs MP-Jet Ball Link Connector 2 pcs MP-Jet 1.5mm Screw
Used for multiple types of linkages including airplanes and boats control linkages Includes: 4 x D2.1mm Linkage Stoppers
Design for the 30-32" EPP models and or any other foamie 5oz -11oz. Ideal for a light weigh indoor use can be used for out door use as well. *Drilling, gluing and assembly my be required*
Design for the 30-32" RcFactory/Hacker and any other foamie 5oz -11oz. Ideal for indoor/outdoor use. Each kit contains a set of lightweight carbon-fiber landing gear, g10 fuselage supports, g10 spats support strips, EPP spats and lightweight wheels and...
RcFactory replacement 30-32" standard horn R2. This is the same horns kit that come standard in each 30-32" Standard Twisted Hobbys/RcFactory models except for MXS-C Model. Not designed to work with older z-bend contorl horn setup assembly, these...
RcFactory replacement Laser / Crack Yak Lite horns, designed to work with snap links.
RcFactory replacement Super Lite horn kits. This is the same horns kit that come in each Super Lite EPP Models. * This is not design to be used with the Clik NG super lite model.
RcFactory replacement MXS-C Plastic Horn pieces. This is the same horns kit that come standard in each 32" Standard Twisted Hobbys/RcFactory MXS-C models.
12 pc's pack of push rod standoff (guides) with 1.25mm hole diameter. These are used to support the long push rods from the servos arm to the control surface horns.
RcFactory Spare Parts Kit: Used for all of the 32" Standard EPP Models (except for MXS-C) includes hardware parts accessories kit, this is the the updated revised hardware which is designed to work with snap-link connections assembly.