TH 34" EPP STEP-ONE TRAINER
- SKU:
- RCF STEP-ONE-GREEN
Description
The 34" EPP Step-One top wing trainer is crafted out of EPP that is extremely easy to assembly as well as very durable which is needed or beginners learning to fly. Being created as a Backyard/ParkFlyer, designer Jan Sedlacek specifically aimed to help new RC pilots start this amazing hobby. While the Step-one was created for beginners it doesn't stops there, experienced pilots will enjoy the smooth flight and ability to fly longer for soaring as well as FPV use. FPV canopy and gear sold separately. With a unique fuse design and removable wing for easy transport as well as manufactured with EPP foam, the Step One is resistant and almost unbreakable. Constructing is very simple so that even an inexperienced modeler can built the model correctly and without complications. In flight feel with the Step One is very forgiving and not difficult for beginners to the point they do not need a buddy box. With motor and rudder control alone creates a sable yet versatile flight envelope.
Easily removable wing makes transporting the plane no problem and so you can take it with you even on vacation. The Step-One is supplied with the landing gear, so you can practice take-offs and landings on the ground. Due to the large wheels the Step-One can handle even start from mowing grass. Landing gear can also be removed to increase flight performance for longer flight time. You can even soar with the eagles with the Step-One, we have seen 30+ mins of run time catching air thermals with a standard 2s 450mah with ease. Enjoy flying with the new Step-One!
Easily removable wing makes transporting the plane no problem and so you can take it with you even on vacation. The Step-One is supplied with the landing gear, so you can practice take-offs and landings on the ground. Due to the large wheels the Step-One can handle even start from mowing grass. Landing gear can also be removed to increase flight performance for longer flight time. You can even soar with the eagles with the Step-One, we have seen 30+ mins of run time catching air thermals with a standard 2s 450mah with ease. Enjoy flying with the new Step-One!
Model Spec's: Wingspan/Length = 34"/28" AUW = 6.5 oz w/ LG (weight with 2s 450mah)
Required Power System link: Power system components:
ICE 5G TWS0705D Servos (2 required)
CSP-2203-1800KV Motor
CSP-15A ESC
6x4.1 APC 3DSF Prop
1 Review
-
Amazing Plane!
I bought one of these in used condition at a swap meet. After changing out the receiver and adjusting the surfaces, it flew great! This is a fun, stable, self-righting flyer. I can't imagine an easier plane to fly. The other pilots ask if I have a gyro in it because it flies so gently. A perfect slow flyer. Does light aerobatic rolls and loops. I'm going to buy another new one and build it because I've already had several offers from even advanced pilots wanting to buy this one from me.
Related Products
Related Products
Power Combo 34" STEP-ONE
MSRP:
$90.25
$84.99
Experience Precision with Twisted Hobbys Electronics!
Unlock peak performance with our spec-matched electronics, perfectly tailored for each Twisted Hobbys
Starbond "Super Fast Thin" CA Glue, EM-02
$8.99
PREMIUM CA SUPER GLUE: Industrial-strength for deep penetration on fragile objects, ensuring a strong, lasting hold.
FAST-FLOWING & DEEP PENETRATING: Water-thin super glue reaches
Starbond - CA Glue Pump Sprayer Accelerator 2oz
$8.99
SUPER GLUE ACCELERATOR - SPEED UP THE BONDING TIME: No more waiting! Cures CA glue in seconds.
NO MORE WHITENING:When superglues dry too fast, you’ll end up with whitening
Prop Direct Drive GWS 7 x 3.5
$1.99
Great for indoor and out door EPP models! *Remember always check prop balance before flying* Color may vary between Orange or Black.
RCF Step One FPV Canopy - Grey color -
$18.99
This alternative canopy will let you change your Step One model into a remotely controlled FPV drone. With the help of our recommended FPV equipment, you may virtually sit down in the cockpit...
Out of stock, email for arrival date.
RCF Step One FPV Conversion Set
$62.99
This FPV conversion set will let you transform your Step One model into a remotely controlled FPV drone. With the help of our FPV equipment, you may virtually sit down in the cockpit of your model...
Crack 2S 450mah 25~50c Lipo
$14.99
Crack Pro Series True 25c 2s 450mah Lipo's now with new technology has allowed for increase power with lower weight packs! Crack Pro Series high quality lipo packs delivering a true 25C with...
Prop-Saver Bands "Standard Duty" (5)
$4.99
Not your ordinary over-the-counter O-ring, great replacement 3/32" thick standard bands ideal for running stock setup systems running 2s! Great replacements for our...
Prop-Saver Bands "Installation Tool"
$8.99
Finally an easy and safe way to install prop saver bands (o-rings) to your out-runner motors. Simple, yet extremely effective design allows for quick and painless prop saver band...
Control Throw Angle-Meter Tool
$9.99
Finally an accurate way to set up all your control surface throws on your 3d models. The Twisted Hobbys Angle-O-Meter is one of the most important tools need to fine tune your models...
Out of stock, email for arrival date.
Building Square Tool
$4.99
Finally an accurate way to see if your building our favorite Twisted Hobbys EPP Foamie square and true. Measures 3" on each side, comes with protective tape over square.
Out of stock, email for arrival date.
CG Machine (center of gravity) Tool
$25.99
Finally an accurate way to set center of gravity on your favorite Twisted Hobbys EPP Foamie. CG machine comes unassemblied with protective tape which can be removed before assembly.
*...