Outrunner 2203 1800KV 18g "Crack Series PRO" Motor

(No reviews yet) Write a Review
SKU:
18g 2203-1800KV CSP
MPN:
Crack Series Pro 18g 1800KV
  • Outrunner 2203 1800KV 18g "Crack Series PRO" Motor
  • Outrunner 2203 1800KV 18g "Crack Series PRO" Motor
  • Outrunner 2203 1800KV 18g "Crack Series PRO" Motor
  • Outrunner 2203 1800KV 18g "Crack Series PRO" Motor
  • Outrunner 2203 1800KV 18g "Crack Series PRO" Motor
  • Outrunner 2203 1800KV 18g "Crack Series PRO" Motor
$34.99
Frequently bought together:

Description

All though Twisted Hobbys is well known for its airplane designs we specialize in creating the most powerful high quality brush-less motors in the market!  We have done it again with the new Crack Series Pro motors, we have surpassed our most popular small out-runner by redesigning our Crack Series 2203-1800kv motor.  

Our goal was to create the most powerful, better balanced, higher accelerating motor along with the highest quality components manufactured to Twisted Hobbys spec's. One of our features to this series is a fixed prop hub assembly, allowing for easy install of prop saver and ultra balanced rotating assemble.  Shallow height can also for increased prop stability, high grade magnets with a new winding along with a hollow shaft allows for ultimate spoil up, increased cooling ability as well resulting in even more thrust output.  Quality without compromise!   Also we have increased the hardware spare parts for even more prop saver hub's since they have been known to get lost, also more o-rings are now included.  There is no mistaking the quality, reliability and overall performance of our Crack Series out runner motors.  Tested, proven to outlast and provide you with endless flights!  

2-3s capable for 55-70 watts of power..  The 5.5mm integrated new hub design works directly with our APC,GWS or Tuff Slow Fly props.  Twisted Hobbys "Crack Series PRO" 2203-1800KV 18g Brushless motor can be used for any 5-10oz foamie model. We recommend 2s with 8x4.3 SF or 8x4DD props for this motor.   If running 3s you must run a smaller prop 6-7" also check watts / amps.Specs:

  • Constant Amps = 8 / 16 Burst
  • 2s 58 watts /3s 78 watts
  • 18g full well with bullet connectors installed.

Our Recommended setup:

  • 2s w/ 8x4 Prop or 3s 7x3.5 Prop

Includes: New Extra Spare Parts!

  • Pre-Soldered 2mm Bullet Connectors, (4) O-Ring, (4) mounting screws and (4) 7mm alum prop hub adapters

View AllClose

0 Reviews

View AllClose