ACCESSORIES

Lightweight & extremely rigid HQ carbon fiber propeller for our larger models. Price per one piece Weight = 15.4g Size = 10x4.7 Hub Adapters sizes included = 5mm and 6mm (same as our 50g-100g motors)  

Lightweight & extremely rigid HQ carbon fiber propeller for our larger models. Price per one piece Weight = 16.4g Size = 11x4.7 Hub Adapters sizes included = 5mm and 6mm (same as our 50g-100g motors)  

These APC 4D 3D Slow Fly props are the solution to a light weight yet rigid prop ideal for fast reverse rotatinal direction for the hard core 3d/4D pilot.  We've tested these props with our 18A reverser ESC and they are just great. APC worked their...

These APC 4D 3D Slow Fly props are the solution to a light weight yet rigid prop ideal for fast reverse rotatinal direction for the hard core 3d/4D pilot.  We've tested these props with our 18A reverser ESC and they are just great. APC worked their...

630218 Propeller and Spinner Set (2 sets) For RTF All Terrain Flight Brushless Dragonfly Joysway RC Airplane

Not your ordinary over-the-counter O-ring, great replacement 1/16" thick standard bands ideal for running stock setup systems (ideal for mini or any 2s setups).     ( 5 O-rings included ).   

Not your ordinary over-the-counter O-ring, great replacement 3/32" thick standard bands ideal for running stock setup systems running 2s! Great replacements for our 14-30g out-runner prop savers o-rings. These o-rings were made to...

Not your ordinary over-the-counter O-ring, heavy duty 1/8" thick ideal for running 3s setups! Great replacements for our 24-30g out-runner prop savers o-rings. These o-rings were made to handle all the stresses you can throw it them...

Finally, the ultimate solution for an ultra light weight nose cone for our small prop saver style motors.   Not only do these look good, but can provide even greater durability to your EPP model by preventing damages from hard nose impacts...

Finally, the ultimate solution for an ultra light weight nose cone for our small prop saver style motors.   Not only do these look good, but can provide even greater durability to your EPP model by preventing damages from hard nose impacts...

Keep things looking sharp, light and your electronics cooler with these hollowed spinner.   These 51mm Air-Flow spinners have a backplate that is 51mm (2 inches) in diameter with an overall length of 46.6mm (1.83 inches).  Backplates...

Keep things looking sharp, light and your electronics cooler with these hollowed spinner.   These 51mm Air-Flow spinners have a backplate that is 51mm (2 inches) in diameter with an overall length of 46.6mm (1.83 inches).  Backplates...

High quality nylon spinner with alloy backing plate 45mm (1.75") Black color nose cone - Mount hole 6mm.  Ideal for 100g motors.  

High quality nylon spinner with alloy backing plate 38mm (1.5") Black color nose cone - Mounting hole diameter is 5mm which is ideal for 50-78g motors.  

These are the direct replacement Collect/Prop Adapter 4mm shaft out runner motors Hub (motor shaft) diameter = 4mm Prop thread diameter = 6mm +/- .025 Mixed colored:

Finally an easy and safe way to install prop saver bands (o-rings) to your out-runner motors.   Simple, yet extremely effective design allows for quick and painless prop saver band install and removals.  Works even on the heavy duty...

Used for holding batteries or other components down.  Great addition tool for modeling. Includes: 1 pc : Blue 1/2 x 5 1/2 Velcro Strap

Used for holding batteries, receivers, esc's or other components down.  Great addition for modeling. Includes: 2 pc (Male & Female) : Black 1" x 4" Velcro Hook & Loop sticky back

Finally an accurate way to set up all your control surface throws on your 3d models.  The Twisted Hobbys Angle-O-Meter is one of the most important tools need to fine tune your models.   Maximize and equal up and down throws, also correct...

Finally an accurate way to see if your building our favorite Twisted Hobbys EPP Foamie square and true.  Measures 3" on each side, comes with protective tape over square.    

Finally an accurate way to set up all your control surface throws on your 3d models.  The Twisted Hobbys Dangle-O-Meter is one of the most important tools need to fine tune your models.   Maximize and equal up and down throws on all...

Finally an accurate way to set center of gravity on your favorite Twisted Hobbys EPP Foamie.  CG machine comes unassemblied with protective tape which can be removed before assembly.    

Fits all 22-35" EPP models depending on location of mounting. Now you can fly when the sun goes down! The Ultra Light Led Kits are fully pre-assembled ready to plug directly into your receiver which give you a true plug and play...

All new Pro Series Larger LED light system is now available!  Now you can fly when the sun goes down ;-)  Full attention to detail has gone into designing these new larger led kits. Twisted Hobbys has done all the work for you with this...

High-quality headlamp has 20 lumens of brightness with 4 LEDs installed that can run for 4 hours striaght. Durable, impact-resistant construction built. The Ozark Trail Mini LED Headlamp runs on 2 x CR2032 lithium batteries which are included with the...

Ideal way to never forgot your CG locations! Kit includes 4 cg stickers.  Great tool

Simply a must have item for your foamies!  One of the biggest power loss issues is an out of balanced prop! High Sensitivity Propeller Balancer, will work with all of our props in house.  Small and light weight unit weighing just under 50g...

Storing your airplane safely has never been easier. The Twisted Hooker Mounting kit, designed for most all small profile and larger airplane models.  Made in the USA. Are you running out of room in your hanger?  We know the feeling and have the...

20 pc's plastic wire staples, great product for holding down wires for electronics, also used for LED kits.

We finally have a solution for those whom desire a variable pitched prop 4D setup with out all the added components and complexity in an all-in-one easy to use ESC.  We've created a super fast reversible ESC which can easily be setup in today's new...

Bundle & save with this 4d power system!  For those whom desire a variable pitched prop 4D setup with out all the added components and complexity in an all-in-one easy to use ESC.  We've created a super fast reversible ESC which can...

Bundle & save with this 4d power system!  For those whom desire a variable pitched prop 4D setup with out all the added components and complexity in an all-in-one easy to use ESC.  We've created a super fast reversible ESC which can...

Design for the 30-32" EPP models and or any other foamie 5oz -11oz. Ideal for a light weigh indoor use can be used for out door use as well. *Drilling, gluing and assembly my be required*        

Design for the 30-32" RcFactory/Hacker and any other foamie 5oz -11oz. Ideal for indoor/outdoor use. Each kit contains a set of lightweight carbon-fiber landing gear, g10 fuselage supports, g10 spats support strips, EPP spats and lightweight wheels and...

Rc Factory landing gear 1 piece.  Used for any of the Rc Factory 37-39" Mono and 40" Crack Pitts XL models. Include one piece carbon fiber landing gear.

Rc Factory 42-43" Replacement Carbon-Fiber Landing Gear 1 piece assembly, this is for all newer revised landing gears.  Include a 1 piece carbon fiber landing gear set.   

Hacker Models 48" or Rc Factory 42-43" Replacement Carbon-Fiber Landing Gear.  Include a two piece carbon fiber landing gear set.   Comes standard on Hacker Model 48" SUpreme model, can also be used for other models including classic...

Great setup for smaller models: Details: Package Includes: 1x Steerable Nylon Tail Wheel Assembly High strength nylon tail wheel assembly. High elasticity 25mm wheel. Durable, and suitable for small rear three-point RC Airplane. Item...

Rc Factory replacement CYXL tail wheel assembly kit.  Can be used on multiple other models.  

Twisted Hobbys HD Tail Wheel Assembly Kit, used for 36-48" models.  Removes all worries for wearing down hard stock or EPP tail wing.  Durable and easy to assembly as well as install.   Total weight is 9g. Assembly Photo...