Our most powerful battery we have tested and carry!  Low voltage drop and ability to delivery very high current these Volta's will not disappoint! Specs: Capacity: 350mah Current Load: 30c Burst Load: 60c Nominal voltage:7.4V(2s) Weight: 20...

Crack Pro Series True 25c 2s 450mah Lipo's now with new technology has allowed for increase power with lower weight packs!  Crack Pro Series high quality lipo packs delivering a true 25C with 50C burst ratings!!! Spec's: Capacity:...

Our most powerful battery we have tested and carry!  Low voltage drop and ability to delivery very high current these Volta's will not disappoint! Specs: Capacity: 450mah Current Load: 60c Burst Load: 80c Nominal voltage:7.4V(2s) Weight:...

Our most powerful battery we have tested and carry!  Low voltage drop and ability to delivery very high current these Volta's will not disappoint. Specs: Capacity: 600mah Current Load: 30c Burst Load: 60c Nominal voltage: 7.2V(2s) Deminsions:...

PT model prp. 7035i, Extremely lightweight carbon fiber propeller for indoor models. Price per one piece Weight = 2.4g Size = 7x3.5 Hub Diameter = 5.5 (same as our motors)  

PT model prp. 8030i, Extremely lightweight carbon fiber propeller for indoor models. Price per one piece Weight = 2.4g Size = 8x3 Hub Diameter = 5.5 (same as our motors)  

PT model prop. 8040i, Extremely lightweight carbon fiber propeller for indoor and out door flying. Price per one piece Weight = 2.4g Size = 8x4 Hub Diameter = 5.5 (same as our motors)  

PT model prop. 8043i, Extremely lightweight carbon fiber propeller for indoor or out door flying. Price per one piece Weight = 2.4g Size = 8x4.3 Hub Diameter = 5.5 (same as our motors)  

PT model prp. 9023i, Extremely lightweight carbon fiber propeller for indoor models. Price per one piece Weight = 2.8g Size = 9x2.3 Hub Diameter = 5.5 (same as our motors)  

PT model prp. 9028i, Extremely lightweight carbon fiber propeller for indoor models. Price per one piece Weight = 2.8g Size = 9x2.8 Hub Diameter = 5.5 (same as our motors)  

PT model prop. 9038i, Extremely lightweight carbon fiber propeller for indoor models or out doors flying. Price per one piece Weight = 2.8g Size = 9x3.8 Hub Diameter = 5.5 (same as our motors)  

PT model prop. 9043i, Extremely lightweight carbon fiber propeller for indoor models. Price per one piece Weight = 2.8g Size = 9x4.3 Hub Diameter = 5.5 (same as our motors)  

PT model prop. 1030i, Extremely lightweight carbon fiber propeller for indoor models. Price per one piece Weight = 3.8g Size = 10x3 Hub Diameter = 5.5 (same as our motors)  

Lightweight & extremely rigid HQ carbon fiber propeller for our larger models. Price per one piece Weight = 15.4g Size = 10x4.7 Hub Adapters sizes included = 5mm and 6mm (same as our 50g-100g motors)  

Lightweight & extremely rigid HQ carbon fiber propeller for our larger models. Price per one piece Weight = 16.4g Size = 11x4.7 Hub Adapters sizes included = 5mm and 6mm (same as our 50g-100g motors)  

Our most powerful battery we have tested and carry!  Low voltage drop and ability to delivery very high current these Volta's will not disappoint! Specs: Capacity: 450mah Current Load: 60c Burst Load: 80c Nominal voltage:11.1V(3s) Weight:...

Our most powerful battery we have tested and carry!  Low voltage drop and ability to delivery very high current these Volta's will not disappoint! Specs: Capacity: 600mah Current Load: 30c Burst Load: 60c Nominal voltage:11.1V(3s) Dimensions: 57mm...

Our most powerful battery yet! Tested for optimal performance, these Volta batteries deliver high current with minimal voltage drop—built to exceed expectations Specs: Capacity: 850mah Current Load: 60c Burst Load: 80c Nominal voltage:11...

Description: Brand Name: Eachine Item Name: Battery Item NO.: H8mini-003 Capacity: 3.7V 150mah Size: 27*17*7mm Weight: 5.7g Usage: spare part for Eachine H8 Mini, H8S 3D Mini RC Quad copter Package Included: 1 x Battery Warning: Do to...

Description: Brand Name: Eachine Item Name: Battery Item NO.: H8mini-003 Capacity: 3.7V 150mah Size: 27*17*7mm Weight: 5.7g Usage: spare part for Eachine H8 Mini, H8S 3D Mini RC Quad copter Package Included: 1 x Battery Warning: Do to...

Used for Jumper T-Lite Radio 18650 Battery: Color: Blue Size: Approx. 6.5x1.8cm/2.55"x1.8" (length x body diameter) Voltage: 3.7V Electric current: 5000mAH Features: -With short circuit, over current and over voltage, reverse polarity circuit...

Maxell LR44 batteries are ideal for replacing batteries in products including watches, calculators and laser pointers. These 1.5V micro alkaline batteries are equivalent to many batteries including the energizer 357. If your device needs a battery...

5-pack bulk easy to open packaging Up to 48MB/s read, up to 20MB/s write in UHS-I mode Class 10, UHS-1 performance allows fast and smooth continuous shooting, multiple frames per second and full HD video capture Fast performance minimizes photo...

Twisted Hobbys is excited to introduce APC's SFR new co-designed 3D/4D Slow Fly Reverible props—our solution for extreme durability and fast reverse rotational flight. Featuring a 5mm hub, the bolt-on setup provides seamless, sturdy acceleration...

Twisted Hobbys is excited to introduce APC's SFR new co-designed 3D/4D Slow Fly Reversible props—our solution for extreme durability and fast reverse rotational flight.  Featuring a 5mm hub, the bolt-on setup provides seamless, sturdy...

These APC 4D 3D Slow Fly props are the solution to a light weight yet rigid prop ideal for fast reverse rotatinal direction for the hard core 3d/4D pilot.  We've tested these props with our 18A reverser ESC and they are just great. APC worked their...

These APC 4D 3D Slow Fly props are the solution to a light weight yet rigid prop ideal for fast reverse rotatinal direction for the hard core 3d/4D pilot.  We've tested these props with our 18A reverser ESC and they are just great. APC worked their...

This simple charger will do the job: Can charge a 2-4s battery just by plugging the balance connector in, without any need for further adjustment.   We also created an option for those that would like to charge via USB from their...

1-8S LiPO Battery Voltage Tester/ Low Voltage Buzzer Alarm (Supports 1S mode 3.7-30V) The voltage checker is used for 1S~8S Lithium battery detection, it automatically detects the voltage of each cell and total voltage of a battery pack...

Newly revised and updated with XT60 as well as the standard Bullet connectors for multiple charging connections (directly connects to chargers with XT60 connectors now)!  Finally the fix for the addiction, no stopping you now, charge up to 8...

The most amount of connectors in one harness! One of the best solutions for anyone not wanting to solder.  These are great for any charger and multiple different types of connectors.  Equipped with 4.0mm bullet connectors on one end 8 different...

Safest way to charge any lipo battery is with a safe lipo bag. Protect yourself and your home from the hazard of lipo charging.This lipo-guard is a fireproof bag, designed to stop and contain the fire caused by incorrectly or poorly functioning lipos,...

Replacement for 30-32" Standard EPP Models, 10mm wide Plastic mount with pre-drilled holes.

Replacement for 30-32" Lite Series as well as other EPP Models, 8mm wide fiber glass mount with pre-drilled holes.

Replacement for 30-32" Standard EPP Models, 10mm wide fiber glass mount with pre-drilled holes.

Designed for the Hacker Models R-Extra series but can be adapted for other models as well.This upgrade allows for full left/right thrust movement. Custom modification is needed to connect the rudder servo. Mounting hardware is not included.Please note:...

Used on Super lite V3 or simlar models for added left/right thrust vectoring.  Motor mount with ball studs for motor vectoring.  Included parts weight = 3.5g Includes vectoring plastic motor mount laminate board 4 pcs of ball pins with...

Stock replacement Edge V3 Motor Mount for Thrust Vectoring.

Twisted Hobbys - Twisted Metal Works 39" Mono Aluminum Mount Crafted from CNC-cut 6061-T6 aluminum and finished with striking fire-red anodizing, our new Series 2 upgrade mount is designed to enhance your build. This redesign reduces unwanted nose...

Twisted Hobbys - Twisted Metal Works 42-43" Mount Precision CNC-cut from 6061-T6 aluminum and now featuring a bold black hard anodized finish. Designed specifically for the Twisted Hobbys 42-43" Veloxity, Edge, and Crack Yak-55 XL EPP models, plus other...