Joysway Rubber (Orion) 880316

Joysway Rubber (PK2) (Binary) 880713

Joysway Rubber set (Caribbean) 88004

Joysway Rubber Bung (Pk4) (Alpha) 880536

Joysway Stainless Steel Trim Tabs And Plastic Stand Set 890121 (Alpha)

Joysway Stainless steel Turn Fins and plastic stand set 890119 (Alpha)

Joysway Aluminum Shaft Tube (Alpha) 890112 8mm inside diameter 10mm outside diameter Alum Tube measures 15"

Joysway Water Proof Gasket (PK2) 890107 used for the Alpha. 

Vertex replacement outrunner hardware bag.  Used for VS28-05C & 05B motors: Includes: Prop Wrench Tool: Prop Hub for prop savers assemble: 7mm and 5.5mm hub diameters Bolt Down Style Prop hub 5mm Shaft: Used with APC new 4D Props with 5mm...

Hardware replacement kit that comes with all Crack Series Pro & Vertex VS small flange based out-runner motors.  Included 4pc's 5.5 to 7mm prop hub adapters, 4 mounting screws and 4 o-rings.

Not your ordinary over-the-counter O-ring, great replacement 3/32" thick standard bands ideal for running stock setup systems running 2s! Great replacements for our 14-30g out-runner prop savers o-rings. These o-rings were made to...

Not your ordinary over-the-counter O-ring, heavy duty 1/8" thick ideal for running 3s setups! Great replacements for our 24-30g out-runner prop savers o-rings. These o-rings were made to handle all the stresses you can throw it them...

The ultimate solution for an ultra light weight nose cone for our small prop saver style motors.   Not only do these look good, but can provide even greater durability to your EPP model by preventing damages from hard nose impacts...

The ultimate solution for an ultra light weight nose cone for our small prop saver style motors.   Not only do these look good, but can provide even greater durability to your EPP model by preventing damages from hard nose impacts...

Used for All Crack Series Prop and TMW 2212 & 2213 series motors.   Prop Adapter bolt on style mounted opposite side of the shaft (reverse mounting) also now includes mounting flange mount screws.  This is the stock part that comes with...

Crack Series Prop and TMW 2217 replacement 5mm front prop hub assembly with screw kit.  Includes motor mount, prop hub adapter, mounting screws, prop hub and washer. Used for Crack Series Pro and TMW 70-78g motors.

TMW & Crack Series Pro 2814 complete replacement hardware bag.  Included 6mm front prop hub adapter, mounting screws (front and back), flange mount, prop hub locking nut and washer.

Great way to run a standard quad motor to a standard flange mount style.  Mount is made from Alum which is very strong and is a great heat conductor, also mount motor mounting screws are countersunk for no interference this kit sits flat and true...

Specs: Motor pylon for the Termik model, ideal for 1806 motors The package includes a plywood pylon and 2x M4 screws for attachment to the model Manual: EN: Pylon_manual (1)  

Used for Wilco 1.3m as well as other sailplanes that require folding props.  Include matching spinner.   Spec's: 8 x 6 Folding prop with spinner. 3.17mm - 3.25mm shaft Dia.

Keep things looking sharp, light and your electronics cooler with these hollowed spinner.   These 51mm Air-Flow spinners have a backplate that is 51mm (2 inches) in diameter with an overall length of 46.6mm (1.83 inches).  Backplates...

Keep things looking sharp, light and your electronics cooler with these hollowed spinner.   These 51mm Air-Flow spinners have a backplate that is 51mm (2 inches) in diameter with an overall length of 46.6mm (1.83 inches).  Backplates...

These are the direct replacement Collect/Prop Adapter 3.17mm shaft out-runner motors.   Prop thread diameter = 5mm +/- .025

These are the direct replacement Collect/Prop Adapter 4mm shaft out runner motors Hub (motor shaft) diameter = 4mm Prop thread diameter = 6mm +/- .025 Mixed colored:

Finally an easy and safe way to install prop saver bands (o-rings) to your out-runner motors.   Simple, yet extremely effective design allows for quick and painless prop saver band install and removals.  Works even on the heavy duty...

Finally an accurate way to set up all your control surface throws on your 3d models.  The Twisted Hobbys Angle-O-Meter is one of the most important tools need to fine tune your models.   Maximize and equal up and down throws, also...

Perfect depth control for creating carbon fiber slots for you EPP models.   Twisted Hobbys came up with another great tool that will last you a life time.   Easy to set your exact depth and easily slide over a ruler making the...

Storing your airplane safely has never been easier. The Twisted Hooker Mounting kit, designed for most all small profile and larger airplane models.  Made in the USA. Are you running out of room in your hanger?  We know the feeling and have the...

Finally an accurate way to set up all your control surface throws on your 3d models.  The Twisted Hobbys Dangle-O-Meter is one of the most important tools need to fine tune your models.   Maximize and equal up and down throws on all...

Made in the USA!!!  Introducing Ultra Halo's Light Stick's, cutting-edge LED emitter products: versatile, featherweight, low-power, rugged, and exceptionally bright. We're thrilled to announce the arrival of www.UltraHalo.com's premium LED...

Finally an accurate way to set center of gravity on your favorite Twisted Hobbys EPP Foamie.  CG machine comes unassemblied with protective tape which can be removed before assembly.  * If standard CG measurements aren't possible due to the...

Best way to never forgot your CG locations!  Easy to peal and stick on your model.  Kit includes 4 cg stickers.       

Another great tool for easy caring, Twisted Hobbys new reference card allows for quick measurments.   Made from Alum and includes a plastic protective pouch.    

Finally an accurate way to see if your building our favorite Twisted Hobbys EPP Foamie square and true.  Measures 3" on each side, comes with protective tape over square.    

Simply yet must have item for your foamies at home or at the field!  One of the biggest power loss issues is an out of balanced prop! High Sensitivity Propeller Balancer, will work with all of our props in house. Ideal for 2-blade propeller less...

20 pc's plastic wire staples, great product for holding down wires for electronics, also used for LED kits.

Used for holding batteries, receivers, esc's or other components down.  Great addition for modeling. Includes: 2 pc (Male & Female) : Black 1" x 4" Velcro Hook & Loop sticky back  

Used for holding batteries or other components down.  Great addition tool for modeling. Includes: 1 pc : 1/2 x 5 1/2 Velcro Strap

Ideal for opening up small holes while building your models.  This is a light duty kit for quick repairs as such. Great for small hobby building models. Includes: 25 pc's HSS Micro Twist Drill Bits: (5pcs X 0.5mm, 5pcs X 0.6mm, 3pcs...

Must have hobby knife set for building, repairing or any of your other modeling needs.   Ideal for cutting foam, plastic, wood, wires or even glue!  Includes multiple different shape blades for different tasks.   Excel Blades...