VA-Model 36" Christen Eagle 2 EPP Full Fuse

Meet the Christen Eagle II! The 36-inch VA Models Christen Eagle II combines the classic appearance of a full-scale aerobatic biplane with durable full-fuselage EPP construction. Its larger, more substantial design gives it the presence and flight character of a traditional built-up model while retaining the durability and repairability of foam.

The airfoiled wings, full fuselage, and lightweight European construction create a smooth and realistic feel in the air. It is capable of sport aerobatics, precision flying, hovering, tumbles, and general 3D maneuvers without feeling overly aggressive at slower speeds.

This model is best suited for intermediate and advanced pilots looking for a distinctive everyday aerobatic biplane that flies larger than its 36-inch wingspan suggests.

Features and Specifications

• Wingspan: 36" (914mm)
• Length: 36" (914mm)
• Estimated Flying Weight: 18–21 oz (510–595g), depending on equipment selection
• Construction: Lightweight printed EPP foam with a semi-assembled full fuselage
• Wing Design: Fully airfoiled biplane wings for a smooth and solid flight feel
• Controls: Aileron, elevator, rudder, and throttle
• Motor Range: 50–72g brushless outrunner producing approximately 200–300 watts
• ESC: 18–30A brushless ESC
• Battery: 3S 1100–1350mAh LiPo
• Propeller: 10 × 3.8 to 10 × 4.7
• Flight Style: Sport aerobatics, precision flying, hovering, tumbles, and 3D
• Pilot Level: Intermediate to Advanced

Required to Complete

This is an airframe kit. The recommended power system, radio equipment, battery, charger, servo extensions, and adhesives are sold separately. No printed manual is included; a downloadable PDF build manual is available under Resources below.

PC72.5 Power System Includes

• CSP 2217 1170KV brushless motor
• BOLT 30A ESC
• Four CSP-D14M digital servos
• APC 11 × 4.5 MR propeller

Recommended Power Setup

• Battery: 3S 1100–1350mAh LiPo
• Propeller: 10 × 3.8 to 10 × 4.7, selected to match the motor and desired performance

Additional Required Items

• 4-channel or greater transmitter and compatible receiver
• 3S 1100–1350mAh LiPo battery
• LiPo-compatible balance charger
• Required servo-extension leads
• Foam-Tac, thin CA, and medium CA glue

Resources

• Download the Christen Eagle II PDF Build Manual
• Download the Christen Eagle II Build Video
• Visit the Christen Eagle II RCGroups Discussion
• Compatible 36" Replacement Parts

We recommend Foam-Tac for the main EPP assembly and thin or medium CA glue where specified for carbon-fiber reinforcement and hardware connections.