REPLACEMENT BY SIZE

Replacement for 30-32" Standard EPP Models, 10mm wide Plastic mount with pre-drilled holes.

Replacement for 30-32" Lite Series as well as other EPP Models, 8mm wide fiber glass mount with pre-drilled holes.

Replacement for 30-32" Standard EPP Models, 10mm wide fiber glass mount with pre-drilled holes.

Designed for the Hacker Models R-Extra series but can be adapted for other models as well.This upgrade allows for full left/right thrust movement. Custom modification is needed to connect the rudder servo. Mounting hardware is not included.Please note:...

Used on Super lite V3 or simlar models for added left/right thrust vectoring.  Motor mount with ball studs for motor vectoring.  Included parts weight = 3.5g Includes vectoring plastic motor mount laminate board 4 pcs of ball pins with...

Stock replacement Edge V3 Motor Mount for Thrust Vectoring.

Specs: Motor pylon for the Termik model, ideal for 1806 motors The package includes a plywood pylon and 2x M4 screws for attachment to the model Manual: EN: Pylon_manual (1)  

Twisted Hobbys Carbon Fiber upgrade its have set the standard for extreme ultimate HQ hardware parts for the best air-frames in their class.   The Crack Yak-55 XL customers have express the need to go above and beyond the standard hardware and...

Twisted Hobbys Carbon Fiber upgrade its have set the standard for extreme ultimate HQ hardware parts for the best air-frames in their class.   We go above and beyond the standard hardware and to create the best strength and machined quality...

These unique snap-in type control link are used similar to z-bend style of control horn connections.  Features: Easy snapped on and off connection Very durable material that is not brittle. Included: 10 pc's = Snap-In Control links Assembly...

Introducing the new lightweight adjustable end-links for Rc Factory's, these are the new upgraded hardware for all models!  These strong, rigid end-links eliminate play and slop, weighing just 1/4 of a gram each. Compatible with all standard...

Genuine Rc Factory Quick Link Parts!   Used on all Rc Factory adjustable end links, 10 pc's of new updated backing ring.  Great replacement package! Kit includes: 10 - Plastic Rear Back Fasteners New Verison of Rear Backers allow for...

Genuine Rc Factory Quick Link Parts!   Used on all Rc Factory adjustable end links, Great replacement and or upgrage package! Kit includes: 10 - Adjustable End Link Block - Set Screws   1 - Matching allen kit  

Rc Factory Spare parts: MP-JET Ball Link connector kit.   Included: 10 pcs MP-Jet Ball Link Connector 10 pcs MP-Jet 1.5mm Screw

Rc Factory Spare parts: MP-JET horn-link connection kit.  Used for the 36" Flash, 39" Edge 540/Extra 300/Crack Yak-55 and Revolto amount many more models as well as Beaver Float Kit.   Fits 1.8mm carbon fiber rod or smaller, plastic...

Threaded Terminal – M2 Thread with 1mm Inner Diameter Description:Rc Factory Small Brass rod connection parts for larger models.  MP-JET brass connectors that come with large models hardware parts to connector .8-1mm carbon fiber push rods to...

Rc Factory Med Brass rod connection parts for larger models.  MP-JET brass connectors that come with med to large size models hardware parts to connect 1.5mm carbon fiber push rods to control horns.   Specs: 10 pc's : MP-JET Brass Med...

Rc Factory Largest Brass rod connection parts for larger models like the Veloxity, Edge XL, Crack Yak XL and Crack Pitts XL.  MP-JET brass connectors that come with larger models hardware parts to connect 1.8mm carbon fiber push rods to control...

Hacker Model Spare parts: MP-JET Large horn-link connection kit.  Used for the 48" SUpreme Model as well as other models. Ideal for 1.8-2mm carbon fiber rod.  Brass pin diameter is 1.55mm   Included: 4 pcs MP-Jet Brass clevis...

Aluminum press nuts with M4 thread. Key Features Weight: 0.3g Thread: M4 Outer diameter: 10mm / 6mm Height: 1mm / 3mm Package Includes 10x Press nut

Set of hinges for attaching rudders. Key Features Weight: 0.26g Size: 40x10mm Package Includes 10x Hinge

Rc Factory Space Adapter White Tube - 2mm OD x 1.2mm ID.  Used for MP Jet connections and or other small adapter size requirements. MP-Use on all the smaller Rc Factory models 35" and smaller. Specs:  4 pc's : White Tube 2mm OD x 1...

10 pc's pack of push rod standoff (guides) with 1.50mm hole diameter and18mm height.  These are used to support the long push rods from the servos arm to the control surface horns.  

Stiff High-Strength Carbon Fiber Rod:  .8mm x 560mm push rods very durable.  Used for Rc factory/Twisted Hobbys EPP model bracing and other assemblies.  Spec's: (1 pc) = .8mm x 560mm  

Stiff High-Strength Carbon Fiber Rod:  1mm x 560mm push rods very durable.  Used for Rc factory/Twisted Hobbys EPP model bracing and other assemblies.  Spec's: (1 pc) = 1mm x 560mm  

Stiff High-Strength Carbon Fiber Short Rod:  1.5mm x 250mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies Spec's: (1 pc) = 1.5mm x 250mm  

Stiff High-Strength Carbon Fiber Short Rod:  1.8mm x 250mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies Spec's: (1 pc) = 1.8mm x 250mm  

Stiff High-Strength Carbon Fiber Short Rod:  2mm x 250mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies Spec's: (1 pc) = 2mm x 250mm  

Stiff High-Strength Carbon Fiber Short tube:  3mm x 2mm x 250mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies.  Can be used for the Gee Bee elevator. Spec's: (1 pc) = 3mm OD/2mm ID...

Stiff High-Strength Carbon Fiber Short tube:  4mm x 3mm x 330mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies.  Used for full rotating elevator (Revolto) Spec's: (1 pc) = 4mm OD/3mm...

Stiff High-Strength Carbon Fiber Short tube:  5mm x 4mm x 330mm push rods very durable.  Used for different Rc factory/Twisted Hobbys EPP model push rod assemblies.  Used for larger elevator (Crack Yak-55 XL) Spec's: (1 pc) = 5mm...

Twisted Hobbys Carbon Fiber upgrade its have set the standard for extreme ultimate HQ hardware parts for the best air-frames in their class.   We go above and beyond the standard hardware and to create the best strength and machined quality...

Twisted Hobbys Carbon Fiber upgrade its have set the standard for extreme ultimate HQ hardware parts for the best air-frames in their class.   We go above and beyond the standard hardware and to create the best strength and machined quality...

Design for the 30-32" EPP models and or any other foamie 5oz -11oz. Ideal for a light weigh indoor use can be used for out door use as well. *Drilling, gluing and assembly my be required*        

Design for the 30-32" RcFactory/Hacker and any other foamie 5oz -11oz. Ideal for indoor/outdoor use. Each kit contains a set of lightweight carbon-fiber landing gear, g10 fuselage supports, g10 spats support strips, EPP spats and lightweight wheels and...

Twisted Hobbys Carbon Fiber upgrade its have set the standard for extreme ultimate HQ hardware parts for the best air-frames in their class.   The Crack Yak-55 XL customers have express the need to go above and beyond the standard hardware and...

Rc Factory landing gear 1 piece.  Used for any of the Rc Factory 37-39" Mono and 45" Jabberwocky models.   Includes: One piece carbon fiber landing gear.

Rc Factory landing gear 1 piece.     Includes:  One piece carbon fiber landing gear.   Used for any of the Rc Factory Step 2 & Piper SC models. 

Rc Factory landing gear 1 piece.  Used for any of the Rc Factory Crack Pitts XL & Air Truck models.    Includes:  One piece carbon fiber landing gear.

Replacement EPP Cowl for Gee Bee.  Just like the original each EPP part is high quality printed on both sides. Includes: 1 piece EPP cowl only.