BUNDLE AND SAVE!  Force Master series power combo's offers the perfect balance of performance, quality products at affordable prices.  Our matched components are a true plug and play system ready to be installed.  The Hacker Master Force...

BUNDLE AND SAVE!  Power system works for VA-Models 75" Acron Glider. Force Master series power combo's offers the perfect balance of performance, quality products at affordable prices.  Our matched components are a true plug and play system...

Experience Precision with Twisted Hobbys Electronics! Unlock peak performance with our spec-matched electronics, perfectly tailored for each Twisted Hobbys airframe. Renowned globally for excellence, our plug-and-play systems ensure your aircraft...

Newest Crack Series Pro 6ch Micro DSM2/DSMX has become the perfect micro receiver for all small to mid size aircraft needs.  Full range receiver with diversity antenna(s) is our highest quality micro ultra light weight receiver for the pilot...

Works great with with Aura 5 stabilizer for plug and play setup.  DSMX 2.4g Compatible Satellite Full Range Receiver with Diversity Antenna (Also DSM2 backward Compatible). True diversity dual antennas with independent...

Search no further, our Crack Series Superior 10ch Micro DSM2 Receiver is the perfect match for any foamie or park flyer, larger model.  Ideal for multiple EPP models or other rc aircraft.  The Superior 10ch Rx also has auxiliary port for...

 Specification Item: TX16S Mark II Size: 287x129x184mm Weight: 750g (without battery) Transmission frequency: 2.400GHz-2.480GHz Transmitter module:  Option 1: Internal 4-in-1 multi-protocol module (CC2500 CYRF6936 A7105 NRF2401)；...

Compatibility:FASST 2.4G: Air Systems (7CH Mode/Multi Mode)FrSky TF Modules: TF-8M, TF-14MFeatures:Light weight and small sizeTwo select able fail-safe setting optionsSpecifications:Number of Channels: 7Operating Voltage Range: 3.5V~10VOperating...

This is a 3D-printed base (made from ABS) for the Flex Innovations FT Aura 5 Lite ultra light weight holder/mount.  Created by TH team for an easy clip in solution. Spec's: 1.7g total weight Mentioned for light weight foamie models  

RcGroups tech information thread.    For plug and play setup we recommend purchasing a DSMX satellite receiver, otherwise you will be required to use a DSMX receiver and will require programming. The FT Aura 5 Lite was created through a...

Created just for the POTENZA AURA 8 flight controller.   Snap in design allows for easy install and removal of flight controller.  

The Aura 8 is the an advanced flight control system for fixed wing aircraft. It Is very lightweight and compatible with all major radio brands. You no longer need to spend a fortune, nor be restricted to specific radio types to experience state of the...

It is a sunny day but cold weather and you want to fly. Your fingers will no be frozen with our RC BAG! It is waterproof and your transmitter and your hands will be inside like in living room. And you can fly for a long time and your hands are still O.K...

Experience Precision with Twisted Hobbys Electronics! Unlock peak performance with our spec-matched electronics, perfectly tailored for each Twisted Hobbys airframe. Renowned globally for excellence, our plug-and-play systems ensure your aircraft reaches...

Jinqiang JQ-2118 Adhesive Glue is a low cost solution and alternative to some of the higher priced EPP adhesive glue offerings   In our testing it works very similar to Welders & Beacon Adhesive glues.  Like all adhesive...

Expect the freshest Beacon Foam Tac glue(s) from Twisted Hobbys due to high turn over.  New redesigned tube and cap!  Great alternative to Welder Adhesive glue and CA glues when building your EPP models.  FOAM-TAC’S improved...

PREMIUM CA SUPER GLUE: Industrial-strength for deep penetration on fragile objects, ensuring a strong, lasting hold. FAST-FLOWING & DEEP PENETRATING: Water-thin super glue reaches into spaces as tiny as 0.002". TOOLS FOR YOUR SUCCESS: 1...

PREMIUM CA SUPER GLUE: Industrial-grade, fast-setting for quick glue-ups, repairs, and filling cracks - offering a strong, durable bond across applications. EASY-FLOWING & PRECISE: Motor oil-like viscosity penetrates spaces up to 0.006"...

PREMIUM CA SUPER GLUE: Industrial-grade, fast-setting for quick glue-ups, repairs, and filling cracks - offering a strong, durable bond across applications. HEAVY-DUTY VISCOSITY FOR GAP-FILLING: 30 seconds drying time. 2000...

Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the...

CEC-CORP C-Bond Thin is a low viscosity general purpose instant/cyanoacrylate glue. This glue comes with an anti-clog cap and has a 5-10 second cure time. C-BOND Thin has good penetration for fitting smooth surfaces. It can bond rubber, plastics,...

CEC-CORP Instant Glue Plastic has low Viscosity and fast cure time even under low humidity conditions. It is designed for bonding Hard/Soft Plastics and Rubber, metal, ceramic and glass.  Cyanoacrylate glue is the industrial name for what...

C-Set is a Super Glue Accelerator, also known as a glue “activator”. It is used to speed up the drying time of cyanoacrylate super glues. The accelerator is a solvent-based product that can be applied before and/or after the glue application...

Rapid Bonding Time: Significantly reduces CA glue curing time to mere seconds, optimizing your workflow and efficiency. Precision Application: Features an easy-to-use precision brush applicator for targeted application, ensuring glue is held...

MILD FORMULA: Starbond Superglue Remover is specially suited to be a mild solution for getting out of sticky situations while being gentle on your skin. THICKER VISCOSITY, WORKS BETTER THAN ACETONE: Our formula is thicker than other products in the...

C-POXY 30 4.25oz kit, is a general purpose fast setting epoxy adhesive. Recommended for bonding metal, ceramics, stone, glass, concrete, wood, fiberglass and many plastics such as polyester, ABS and rigid PVC (not suitable for PTFE-PP-PE and rubbers)...

CEC-CORP Tips contains 5 nozzles. C-TIP is used for applying low viscosity Cyanoacrylate or instant glues to the finest cracks and gaps. The small nozzle can increase accuracy and provide more control in glue application.   Contains 5 nozzles...

Blenderm tape is one of the best know tapes used for hinging and repairing your Depron or Epp models. Each 3M Blenderm key features are its high strength adhesive, extremely flexible and long lasting.   Each roll consists of 1" wide...

Twisted Hobbys 39" CNC cut solid carbon fiber motor mount with hardware.  Designed specifically to work with the as well as other similar size models  These are super thick includes mount hardware to be used with stock running gear and setup...

Twisted Hobbys 40" CP XL CNC cut solid carbon fiber motor mount with hardware.  Designed specifically to work with the as well as other similar size models  These are super thick includes mount hardware to be used with stock running gear and...

Twisted Hobbys 42-43" CNC cut solid carbon fiber motor mount.  Designed specifically to work with the Twisted Hobbys   These are super thick includes mount hardware to be used with stock running gear and setup on all 42-43" Twisted...

It doesn't get more detailed then this guys, upgrade it to the max!!! Our new Crack Mini Series Fiber Upgrade Hardware Kit design for the 22" Mini Pitts EPP models for the extremist wanting no compromise for their EPP models!!!  (Can also be used on...

It doesn't get more detailed then this guys, upgrade it to the max!!! Our new Crack Series Mini Mono Planes Fiber Upgrade Hardware Kits are design for the 24" Mini EPP models for the extremist wanting no compromise for their EPP models!!!  (Can also...

It doesn't get more detailed then this guys, upgrade your 29" EPP Raptor Jet to the max!!! Our new Crack Carbon Fiber Upgrade Kits are design for all the 29" Raptor Jet EPP models. With excellent tensile strength and precision machined made in the USA...

It doesn't get more comprehensive then this guys, upgrade it to the max!!! Our new Crack Series 30" Pitts Carbon Fiber Upgrade Hardware Kits are design to work directly with RcF 30" EPP Pitts M12 Standard (Back Yard Series) Biplane models for the...

It doesn't get more comprehensive then this guys, upgrade it to the max!!! Our new Crack Series 30" PittsBULL Carbon Fiber Upgrade Hardware Kits are design to work directly with Hacker Models 30" EPP PittsBULL (Super Lite Series) Biplane models for the...

It doesn't get more detailed then this guys, upgrade your Crack Wing to the max!!! Our new Crack Wing Series Fiber Upgrade Hardware Kits are design for all the 30" Crack Wing Series EPP models. With excellent tensile strength and precision machined made...

It doesn't get more detailed and specialized then this guys, upgrade your 31" EPP Racer model to the max!!! Our new Crack Carbon Fiber Upgrade Kits are design for all the 31" Racer EPP models. With excellent tensile strength and precision machined made...

Carbon Fiber Upgrade Hardware Kit – 32" Standard EPP Models(Not compatible with MXS-C or Extra NG) Upgrade your 32" Standard EPP model with this precision-machined Carbon Fiber Hardware Kit—designed for extreme durability without added...

These new Carbon Fiber Upgrade Hardware Kits are design for the 32" MXS-C Standard EPP models for the extremist wanted no compromise for thier EPP models!!!  (Can also be used on any 9-10mm EPP foamies) With excellent tensile strength and precision...