ELECTRONICS

Fits all 22-35" EPP models depending on location of mounting. Now you can fly when the sun goes down! TH Small Led Kits are fully pre-assembled ready to plug directly into your receiver which give you a true plug and play kits with out the hassle...

This is a Joysway J2C93 2.4ghz 2CH Transmitter 930518. This is a off-market item that offers simple functionality. It has been tested and functions normally. Also will would work well for surface vehicles such as 1/10 crawlers or other models.  

This is a Joysway 4ghz 2CH Receiver 930519. This is a off-market item that offers simple functionality. It has been tested and functions normally. Also will would work well for surface vehicles such as 1/10 crawlers or other models.    

Twisted Hobbys "Bolt" Series 6A esc was deign specifically for reduced weight and the perfect smooth throttle feel pilots are after.   Default programmed settings work perfectly with our Crack Series out runner motors allowing for a true plug...

We keep creating some of the lightest weight ESC's that can surely pack a punch. Here is our new Bolt Feather Lite Series ESC offering unreal strength in  a light weight package.   The perfect match with our Crack Series or similar...

Twisted Hobbys "Bolt" Series 20A esc was deign specifically for reduced weight and the perfect smooth throttle feel pilots are after.   Default programmed settings work perfectly with our Crack Series out runner motors allowing for a true plug...

Twisted Hobbys "Bolt" Series 22A esc was deign specifically for reduced weight and the perfectly smooth throttle feel pilots are after.   Default programmed settings work ideally with our Crack Series Pro ou- runner sereis motors allowing for a...

Twisted Hobbys "Bolt" Series 30A esc was deign specifically for reduced weight and the perfect smooth throttle feel pilots are after.   Default programmed settings work perfectly with our Crack Series out runner motors allowing for a true plug...

We keep creating some of the lightest weight ESC's that can surely pack a punch. Here is our new Bolt Feather Lite Series ESC offering unreal strength in  a light weight package.   The perfect match with our Crack Series or similar...

Used for all Twisted Hobbys BOLT Series ESC's and extremely easy to use.  Features like timing setting for different size props, rotation reversing, volt cut off percentage, brake on / off, start up acceleration, lipo / nimh and governor...

The Vertex Series ESC's delivers top 4D performance with easily switches between 3D & 4D modes with a simple side switch. Programming is quick and easy, everything is done for you! Designed for EPP models (22"-37"), we recommend 2S-3S lipos with...

Twisted Hobbys Programmable used for Rc Boats, not airplanes.  Forward & Reverse 35A ESC's offer the highest performance and reliability you can trust.    Used for Rescue boats (photo in pictures for reference) or other rc boats, not...

Twisted Hobbys Crack Series Pro servos are our newest line of custom spec servos.  When our customer deserve only the best quality products for their aircraft’s, enter our Crack Series Pro custom spec line servos designed around our models...

Twisted Hobbys Crack Series Pro servos are our newest line of custom spec servos.  When our customer deserve only the best quality products for their aircraft’s, enter our Crack Series Pro custom spec line servos designed around our...

Twisted Hobbys Crack Series Pro servos is our newest line of custom spec servos.  When our customer deserve only the best quality products for their aircraft’s, enter our Crack Series Pro custom spec line servos designed around our models to...

Twisted Hobbys Crack Series Pro’s is our newest line of custom spec servos.  When our customer deserve only the best quality products for their aircraft’s, enter our Crack Series Pro custom spec line servos designed around our...

Twisted Hobbys Crack Series Pro servos is our newest line of custom spec servos.  When our customer deserve only the best quality products for their aircraft’s, enter our Crack Series Pro custom spec line servos designed around our...

Twisted Hobbys Crack Series Pro servos is our newest line of custom spec servos.  When our customer deserve only the best quality products for their aircraft’s, enter our Crack Series Pro custom spec line servos designed around our...

High-Strength Light Weight Rigid Carbon Fiber Extension Arm Kit.   Excellent tensile strength and rigidity properties you can count on.  Perfect choice for maximizing control surfaces deflection with out the added weight and looking good while...

Introducing the ideal solution for ease of creating a differential arm for most all smaller and mid size models using 1 CSP-D14M Servo for ailerons This diff arm offer a secure fit without the need for glue or screws, allowing for easy removal...

Introducing the ideal solution for extending CSP-D2/4/6M Servo stock small servo arms. Extended the small .039-.041 hole diameter out to 20mm in length larger control surface throws effortlessly. These extension horns offer a secure fit without the need...

Introducing the ideal solution for extending CSP-D10M Servo stock small servo arms. Extended the small .039-.041 hole diameter out to 21mm in length larger control surface throws effortlessly. These extension horns offer a secure fit without the need for...

Introducing the ideal solution for extending CSP-D14/18M Servo stock small servo arms. Extended the small .039-.041 hole diameter out to 26mm in length larger control surface throws effortlessly. These extension horns offer a secure fit without the need...

Spec's: Operating Speed (4.8V): 0.09sec/60°Operating Speed (6V): 0.07 sec/60°Stall Torque (4.8V): 1.65kg.cm (22.99 oz/in)Stall Torque (6V): 1.89 kg-cm (26.25 oz/in)Dimensions: 22.7X12.2X29.2mm /0.89 X0.48X1.15 inWeight: 9.45 g (0.333oz)Connector...

Description: Operating Speed: (4.8V) 0.14sec/60° Operating Speed: (6V) 0.12 sec/60° Stall Torque: (4.8V) 5.56kg.cm Stall Torque: (6V) 6.21 kg-cm Dimensions: 40.5X20.3X38mm Weight: 48.5g Connector Wire Length: JR 265 mm Features: Standard size...

Description: Operating Speed: (4.8V) 0.14sec/60° Operating Speed: (6V) 0.12 sec/60° Stall Torque: (4.8V) 5.56kg.cm Stall Torque: (6V) 6.21 kg-cm Dimensions: 40.5X20.3X38mm Weight: 48.5g Connector Wire Length: JR 265 mm Features: Standard size...

Introducing the new lightweight adjustable end-links for Rc Factory's, these are the new upgraded hardware for all models!  These strong, rigid end-links eliminate play and slop, weighing just 1/4 of a gram each. Compatible with all standard...

New upgraded replacements are now available: Link  

Genuine Rc Factory Quick Link Parts!   Used on all Rc Factory adjustable end links, 10 pc's of new updated backing ring.  Great replacement package! Kit includes: 10 - Plastic Rear Back Fasteners New Verison of Rear Backers allow for...

Hacker Models MC 22A ESC Programmable Brushless Speed Controller (ESC) Weight: 22g / 26g with wires & connectors Number of cells (LiPo): 5-9 NiXX 2-3 LiPo BEC: 5,2V/2A (2W, Linear) Dimensions: 47x27x7mm (without wires) Max...

Genuine Rc Factory Quick Link Parts!   Used on all Rc Factory adjustable end links, Great replacement and or upgrage package! Kit includes: 10 - Adjustable End Link Block - Set Screws   1 - Matching allen kit  

Wait!!! Don't remove your servo if you have control surface flutter which is very common on most all 3D aircraft's.  Once plagued with control surfaces flutter but not any more since we now have a solution with our Control-Surface Servo...

Used as another option to hold adjustable end-links to control horns instead of the tiny black factory ring-clips.  They are an easy on/off rear type of connection to the adjustable end-links.  * These are an alternative to the factory black...

That's right guys finally we have a adjustable control surface end-links that is very light weight, strong yet rigid by designed for no play or slop you desire.  Each weighing only a 1/2 of a gram!!!! These end-links work with all standard servo...

JST 4" Male to Female Connection Cable used for extension battery or esc battery connections. 

JST 6" Male to Female Connection Cable used for extension battery or esc battery connections.  Can be used for the Raptor battery locations.

JST Parallel Connection Cable used for connecting two esc's and two motors with one battery source.  Used on Puddle Star model.

JST-XH to JST LED Power Distribution Lead.  Great way to connected multiple LED's to a 3s lipo balance plug/port. We recommend checking +/- polarity when plugging in. - Used for large LED kit.  Large LED kit requires 3 units.

Males side of JST connector, can be used for lipo batterys connectors 

Used for esc to battery connection