ELECTRONICS

 Just like the original but now with more power!  This G.T. Power C6D charger is one of our most common smart charger as it charges most batteries that come with modern RC cars and doesn't have excessive and unnecessary features whilst...

This simple charger will do the job: Can charge a 2-4s battery just by plugging the balance connector in, without any need for further adjustment.   We also created an option for those that would like to charge via USB from their...

1-8S LiPO Battery Voltage Tester/ Low Voltage Buzzer Alarm (Supports 1S mode 3.7-30V) The voltage checker is used for 1S~8S Lithium battery detection, it automatically detects the voltage of each cell and total voltage of a battery pack...

Newly revised and updated with XT60 as well as the standard Bullet connectors for multiple charging connections (directly connects to chargers with XT60 connectors now)!  Finally the fix for the addiction, no stopping you now, charge up to 8...

The most amount of connectors in one harness! One of the best solutions for anyone not wanting to solder.  These are great for any charger and multiple different types of connectors.  Equipped with 4.0mm bullet connectors on one end 8 different...

Safest way to charge any lipo battery is with a safe lipo bag. Protect yourself and your home from the hazard of lipo charging.This lipo-guard is a fireproof bag, designed to stop and contain the fire caused by incorrectly or poorly functioning lipos,...

 Twisted Hobbys "Crack Series Pro" CSP 1407-3600KV 17g out-runner specifically design for the Gripen Dual motor models.  Quality without compromise all Crack Series Pro motors are proven to outlast and provide you with endless flights...

 Twisted Hobbys "Crack Series" CS-17/31M 2650KV 12g out-runner is our smallest motor.  Specifically design for the Mini Series as well as Crack Wing models.  Quality without compromise all Crack Series motors are proven to outlast and...

Though Twisted Hobbys is known for airplane designs we are also well known for creating some of the most powerful small motors available and Crack Series Pro are the perfect example!  We have done it again, we have surpassed our most popular small...

Though Twisted Hobbys is known for airplane designs we are also well known for creating some of the most powerful small motors available and Crack Series Pro are the perfect example!  We have done it again, we have surpassed our most popular small...

All though Twisted Hobbys is well known for its airplane designs we specialize in creating the most powerful high quality brush-less motors in the market!  We have done it again with the new Crack Series Pro motors, we have surpassed our most...

While Twisted Hobbys has already been known for designing airplanes, we also create some of the most powerful small motors available and our Crack Series Pro series are the perfect example!  We have done it again, we have surpassed our most popular...

Elan Motors 2205-2600kv was created for the Proxy FPV aircraft and other quad style high-end motor requirements.   If using with ProXy model, it will require a flange mount quad adapter. Spec’s:2205 : KV: 2600Shaft Diameter: 3.0mm,...

While Twisted Hobbys has already been known for designing airplanes, we also create some of the most powerful small motors available and our Crack Series Pro series are the perfect example!    Our goal was to create the most powerful, better...

  The Twisted Hobbys Crack Series Pro 2217 70g 1170KV motor is an excellent choice for you 22-32oz model.  Newly revised and updated design for even lower weight yet more power.  While lowering watts and amps output surprisingly we...

The Twisted Hobbys Crack Series Pro "CSP" 2814-1050KV 100g motor is an excellent choice for your 42-48" models or any other 22-32oz model.  Newly revised and updated design for even lower weight yet more power.  While lowering watts and amps...

Hardware replacement kit that comes with all Crack Series Pro small flange based (2202,2203,2206,2305) out-runner motors.  Included 4pc's 5.5 to 7mm prop hub adapters, 4 mounting screws and 4 o-rings.

These are the classic series original hardware bags that came standard with our 2202/2203/2206 Crack Series motors.  Included two different prop hub adapter a 7mm and 8mm, 4 mounting screws and 2 o-rings.

Not your ordinary over-the-counter O-ring, great replacement 1/16" thick standard bands ideal for running stock setup systems (ideal for mini or any 2s setups).     ( 5 O-rings included ).   

Not your ordinary over-the-counter O-ring, great replacement 3/32" thick standard bands ideal for running stock setup systems running 2s! Great replacements for our 14-30g out-runner prop savers o-rings. These o-rings were made to...

Not your ordinary over-the-counter O-ring, heavy duty 1/8" thick ideal for running 3s setups! Great replacements for our 24-30g out-runner prop savers o-rings. These o-rings were made to handle all the stresses you can throw it them...

Used for All Crack Series Prop and TMW 2212 series motors.   Prop Adapter bolt on style mounted opposite side of the shaft (reverse mounting) also now includes mounting flange mount screws.  This is the stock part that comes with the 2212...

Crack Series Prop and TMW 2217 replacement 5mm front prop hub assembly with screw kit.  Includes motor mount, prop hub adapter, mounting screws, prop hub and washer. Used for Crack Series Pro and TMW 70-78g motors.

TMW & Crack Series Pro 2814 complete replacement hardware bag.  Included 6mm front prop hub adapter, mounting screws (front and back), flange mount, prop hub locking nut and washer.

Great way to run a standard quad motor to a standard flange mount style.  Mount is made from Alum which is very strong and is a great heat conductor, also mount motor mounting screws are countersunk for no interference this kit sits flat and true...

These are the direct replacement Collect/Prop Adapter 3.17mm shaft out-runner motors.   Prop thread diameter = 5mm +/- .025

These are the direct replacement Collect/Prop Adapter 4mm shaft out runner motors Hub (motor shaft) diameter = 4mm Prop thread diameter = 6mm +/- .025 Mixed colored:

Fits all 22-35" EPP models depending on location of mounting. Now you can fly when the sun goes down! The Ultra Light Led Kits are fully pre-assembled ready to plug directly into your receiver which give you a true plug and play...

High-quality headlamp has 20 lumens of brightness with 4 LEDs installed that can run for 4 hours striaght. Durable, impact-resistant construction built. The Ozark Trail Mini LED Headlamp runs on 2 x CR2032 lithium batteries which are included with the...

This is a Joysway J2C93 2.4ghz 2CH Transmitter 930518. This is a off-market item that offers simple functionality. It has been tested and functions normally. Also will would work well for surface vehicles such as 1/10 crawlers or other models.  

This is a Joysway 4ghz 2CH Receiver 930519. This is a off-market item that offers simple functionality. It has been tested and functions normally. Also will would work well for surface vehicles such as 1/10 crawlers or other models.    

Twisted Hobbys 6A ESC w/ 6V BEC, designed to with the Crack Series smaller out-runner brushless motors. Capable of running full load of 3 digital servo with a custom BEC chip set.* Twisted Hobbys Programmable ESC's offer the highest performance and...

Twisted Hobbys "Bolt" Series 6A esc was deign specifically for reduced weight and the perfect smooth throttle feel pilots are after.   Default programmed settings work perfectly with our Crack Series out runner motors allowing for a true plug...

The CSP 12A esc is great for any of Twisted Hobbys, RcFactory and Hacker smaller EPP models.  A perfect match with our Crack Series smaller out-runner brush-less motors creating fast linear throttle response.  Twisted Hobbys Programmable ESC's...

Finally a solution for those that want the most performance value and low weight ESC is now available.  The Crack Pro Series 15A esc now has a stronger BEC for those hungry demanding digital servos so no need to be concerned with ESC rebooting...

We finally have a solution for those whom desire a variable pitched prop 4D setup with out all the added components and complexity in an all-in-one easy to use ESC.  We've created a super fast reversible ESC which can easily be setup in today's new...

Twisted Hobbys "Bolt" Series 20A esc was deign specifically for reduced weight and the perfect smooth throttle feel pilots are after.   Default programmed settings work perfectly with our Crack Series out runner motors allowing for a true plug...

Bundle & save with this 4d power system!  For those whom desire a variable pitched prop 4D setup with out all the added components and complexity in an all-in-one easy to use ESC.  We've created a super fast reversible ESC which can easily...

Bundle & save with this 4d power system!  For those whom desire a variable pitched prop 4D setup with out all the added components and complexity in an all-in-one easy to use ESC.  We've created a super fast reversible ESC which can easily...

Twisted Hobbys "Bolt" Series 30A esc was deign specifically for reduced weight and the perfect smooth throttle feel pilots are after.   Default programmed settings work perfectly with our Crack Series out runner motors allowing for a true plug...