Name: Receiver Micro 6Ch DSMX/DSM2 CRACK PRO 2.4Ghz Spectrum w/ Diversity Antenna
SKU: 2.4g CSP 6ch DSMX/DSM2
Price: 29.99 USD
Availability: InStock
Rating: 5 (11 reviews)

Receiver Micro 6Ch DSMX/DSM2 CRACK PRO 2.4Ghz Spectrum w/ Diversity Antenna

(11 reviews) Write a Review

SKU:

2.4g CSP 6ch DSMX/DSM2

Availability:

In Stock — Ready to Ship

Bulk Pricing:

Buy in bulk and save

Description
Videos
11 Reviews

Description

The Crack Series Pro 6-channel receiver is a compact, lightweight solution for small to mid-size RC aircraft using Spektrum DSMX or legacy DSM2 transmitters. At approximately 4.1 g, it combines dual diversity antennas, automatic failsafe storage, Quick Connect brownout detection, and a wide 3.5V to 8.5V operating range for dependable control without unnecessary size or weight.

Crack Series Pro Receiver Overview

DSMX / DSM2 Compatible

Channels

6 Channels

Protocol

DSMX / DSM2

Frequency

2.4GHz

Input Voltage

3.5V–8.5V

Dimensions

29 × 19 × 11 mm

Weight

Approximately 4.1 g

Dual Diversity Reception

Two diversity antennas independently monitor reception to help maintain a dependable control connection. Extended antenna leads allow the exposed antenna sections to be positioned in different locations and orientations inside foam, carbon-reinforced, or metal-equipped aircraft.

Control and Safety Features

Automatic failsafe-position storage during binding

Quick Connect with brownout detection

Red LED indicates recorded signal holds

Dual antennas with independent signal monitoring

Wide 3.5V to 8.5V operating range

Package and Construction

Receiver: Crack Series Pro 6-channel DSMX/DSM2-compatible receiver

Antennas: Two extended diversity antenna leads

Protective Covering: Black or clear PVC shrink tubing

Included: Bind plug

Documentation: Printed quick-reference guide

Automatic Failsafe Setup: After a successful bind and valid transmitter signal are detected, the receiver stores the current positions of all channels. If the signal is lost for more than two seconds, the receiver moves the channels to those stored positions. Place all transmitter controls in the desired failsafe positions before binding.

Binding Procedure

1 Set the transmitter controls to the positions you want stored for failsafe operation.

2 Insert the bind plug into the receiver.

3 Supply power to the receiver. The LED will begin flashing rapidly.

4 Maintain at least 2 meters of separation and place the transmitter into bind mode.

5 When the receiver LED remains solid, binding is complete.

6 Disconnect power and remove the bind plug before normal operation.

Binding Distance: Some newer Spektrum transmitters, including NX and iX series radios, may require additional distance from the receiver during binding. If binding is unsuccessful, gradually increase the separation. In some installations, up to approximately 30 feet may be required.

Installation and Preflight: Position the two antennas in different orientations whenever possible. Keep the exposed antenna sections away from carbon fiber, batteries, motors, ESCs, and large metal components. Secure the receiver to prevent movement or strain on the servo connections, then complete a transmitter range check and confirm correct failsafe operation before flying.

Compatibility Notice: This receiver is not manufactured or endorsed by Spektrum. Crack Series receivers are independently tested for compatibility with Spektrum DSMX and DSM2 protocols only. It is not compatible with JR DMSS or other radio-system protocols.

Setup Resources

Receiver Binding and ESC Calibration Video Shop Receivers and Radios

View AllClose

Videos

Receiver Binding and ESC Calibration Video (HOW TO)

Process used to binding your CSP Receiver(s) and how to Calibr...

View AllClose

11 Reviews

5
RECEIVER MICRO 6CH DSMX/DSM2 CRACK 2.4GHZ SPECTRUM/JR WITH SATELLITE PORT

Posted by Robert Vaught on Sep 12th 2018

I have a number of TH models and always use this receiver with my DX8. I have never had a problem with them and my Laser (for example) has countless flights on it.