TH 32" EPP Edge 540 GH

(16 reviews) Write a Review
SKU:
RCF 32 Edge GH
  • TH 32" EPP Edge 540 GH
  • TH 32" EPP Edge 540 GH
  • TH 32" EPP Edge 540 GH
  • TH 32" EPP Edge 540 GH
$82.99

Description

The 32" Edge 540 was designed by Twisted Hobbys and David Kyjovsky of Rc Factory for a beginner or the experienced 3D pilot wanting to fly in small areas.  

With the newest design concepts for EPP construction this bird was made to be built fast and out last the competition.  With pre-hinged constructions along with new carbon fiber trust design makes it one of the fastest EPP models in its class to build yet keeping the tail section rigid for precision flying.   Each kit includes high quality printed EPP air frame, carbon fiber control rods, control horns, adjustable end-links, fiber motor mount and completed revised snap links to eliminate control rod play.  

Model Spec's: Wingspan/Length = 32"/31" AUW: 7.2oz w/ LG (weight w/ 2s 25c 450mah)
Power system components listed individual below:  Also complete "all in one" power system available here: Link
 

  CSP-D14M Servo 
  CSP-D10M Servos (2 required) 
  CSP-2305-1500KV Motor
  CSP-15A ESC  
  9x4.7 Prop    

Other Requirements:
  Receiver  4 - 6 ch: Link 
  2s450/600mah Lipo: Link
  Adhesive Glue :   Link

Build Resources & Replacement Parts Links:
  Build Vide: Link

  PDF Manual: Link or Link
  Replacement Parts: Link
  Upgrade Parts: Link

View AllClose

16 Reviews

  • 5

    Great

    Posted by Andrew on Jul 5th 2024

    Picked this up as a warm up and park flyer 3d practice plane.. once you get it trimmed up and the cg right, it flies like a knife. I enjoy flying this as much as the big planes to be honest… going to order another. This 32” size is just right imo for park flying. I had the veloxity 42” model and it was just a little too big with people around at the park to have in the air.. this 32” wont cause any damage.. and doesn’t attract too much attention. Recommended. Also any wind under 10mph is ok.. still gets tossed around but controllable and great for practice. Any higher of winds you’d be fighting to keep it stable

  • 5

    32" EDGE 540

    Posted by Bob on Oct 20th 2021

    I built this airplane a year and a half ago. Wasn't skilled enough for 3D back then. It hung on the wall collecting dust. Just took it out this weekend and fell in love with it. Basically does what you tell it to do. A real confidence builder. Rolls straight and level. Lands like a feather. Great 3D airplane. Love it.

  • 5

    All twisted hobbys planes

    Posted by Unknown on Nov 20th 2020

    Absolutely awesome! Have more fun with my crack yaks then all my giant scales

  • 5

    540 twisted edge 32”

    Posted by Don Taylor on Nov 16th 2020

    This is my 3rd twisted plane. An incredible flyer that will hone your skills with stick time. These planes are perfect to practice anytime/ anywhere. This transfers to flying the bigger machines at a fraction of the cost in the event of kissing the ground. You will not be disappointed

  • 5

    Backyard Fun

    Posted by Brent Riley on Aug 17th 2020

    First 3D plane I've owned and first plane I've built from a kit. I've only been flying two months but already getting into aerobatics pretty heavy. I fly everything at the ragged edge of my personal skill (and if that allows, the model's flight envelope). Wanted something cheap and tough to push my skills with. Very pleased with the performance. Normal aerobatic maneuvers are easily kept within a 160' box with slow/3D moves kept within half of that. Very responsive and easy to save. Belly lands from a harrier with no gear just fine. I haven't even started to touch this plane's full potential in 10 flights on 2S. Handles wind great up to about 6 mph for me. My only complaint is that some of the servo cuts on the Edge weren't done at the factory like they were on the Yak shown in the build video.

  • 5

    Edge 540 32"

    Posted by Mark Speirs on May 14th 2020

    I have been out the the hobby of several years and this is the first plane is a while. Building was good as long as you what the videos. Written instruction are just OK. Just complete its maiden flight and love this plane. I highly recommend this plane.

  • 5

    TH 32" EPP EDGE 540 GH W/ HD LANDING GEAR

    Posted by Bob D on Apr 4th 2020

    Twisted Hobby is a very customer oriented organization ! These models are top notch. I own two different planes from these guys. The 540 Edge 32" is a good build. Their shipping was fast & the kits are well made ! Brad in their customer service was always attentive & very informative. He was also always available thru email if you can believe it or not ! Good job guys/gals ! 5 stars from me !

  • 5

    Very nice kit.

    Posted by HansB on Dec 12th 2019

    Great customer service and fast shipping!

  • 5

    Second summer still wows!!!

    Posted by Dave on Sep 8th 2018

    Buy this plane if you want a great time and a constant smile on your face !!!

  • 5

    32" Edge 540

    Posted by EG Harshman on Sep 1st 2018

    My first 3d plane and all I can say is amazing in every way. This little plane is easy to see with its bright red color scheme. It can be flown extremely slow or very fast depending on your desire of the day. The roll rate is insane with nothing added but aileron & high rates. Indestructable is probably one of the best features. For some reason TWISTED HOBBIES FOAM is superior to any other I have tried or flown. The foam may crack of get distorted but that is an easy fix. Very light equals little damage which equates to more flying time. I have been flying with .95mah nanotech 2 cell batteries which I find give you much more flying time with a bit more punch. Vertical? Yes yes yes.It can hover, dance, go straight verticle & I can even stop in mid air. I am old school. No gyros or stabilizers for me.Just a few thought to sway you to go 3d 540 Edge. You will not be disappointed.

View AllClose