Designed and developed by Twisted Hobbys team members Chris Jewett and Cody Wojcik, the Crack Turbo Beaver takes the extreme design philosophy that produced the renowned Crack Yak, Crack Pitts, and Crack Laser and gives the Crack treatment to the famous DeHavilland Turbo Beaver bush plane. RCFactory adds their world-class manufacturing techniques and the highest quality EPP foam available. The result is just about as much fun as you can have with an RC airplane! Harriers, hovers, precise knife-edge, rolling harriers, flat spins, snap rolls, and other high-performance aerobatics compliment the traditional loops and barrel rolls you would expect from a high-wing plane. Being nearly indestructible means you can fly between trees, spot-land on your picnic table, and try other crazy things that you'd never do with a balsa airplane.
Equipped with four 5-gram servos, a 2s-3s 350-650mah battery, and 19-26 gram motor, the Crack Turbo Beaver is exceptionally versatile and will fly well on a wide variety of equipment and CG placements. Of course, Twisted Hobbys keeps everything simple as always with a proven plug-and-play power combo that provides great performance at a reasonable price.
Pair your Crack Turbo Beaver with any computerized 5+ channel radio and enable flaperons and spoilerons for even more fun and capability! Near-vertical stalled descents with the spoilers up, low-speed scale flying with the flaps down, and super-tight loops with the flaps mixed to the elevator add even more depth to the CTB's repertoire.
Wingspan = 35"
AUW = 7-8oz (depending on setup and battery size)
Recommended required components:
19-26g 1450-1750kv Out-Runner
(4) 5-7g servos
2s 360-650mah with 9x4.7 prop
3s 450-650mah with 8x4.3 prop (optional setup)
Videos Hide Videos Show Videos
Crack Turbo Beaver - RC Factory. 2 seasons of flying fun
Crack Turbo Beaver - RC Factory. Un parkflyer qui cache bien s...
Crack Turbo Beaver - 101
How to use the flaps, spoilers and mixes on a Twisted Hobbys C...
Crack Turbo Beaver setup with Jeff Williams
Jeff Williams discusses how to setup the Crack turbo beaver
2 Reviews Hide Reviews Show Reviews
Out of all my airplane this one gets the most stick time. Power and speed are good model is very stiff. Components are better then excepted, now I see why others enjoy and get Twisted hobbies models.
I now have two similar looking models , 1 the Chinese copy of this and 2. The original Twisted Hobbys Beaver. Night and day different in quality and over all flight between the two. Yes there is a cost difference and fora reason. The Acrocub knock off is just that. The EPP doesn't even feel like its the same material as what RcFactory / TH uses. Its mushy and junky, hardware was heavy no where near what the Beaver has. After building both the AC is 2 oz heavier and its thinner foam no less lol. You can see the whole tail move, I read you can add bracing or something which i refuse to do since its not for me, others can purchase the junk im done with that. You get what you pay for these days. I'm a TH believer they care about modeling not just selling junk.