TH 39" EPP Revolto - Blue

The Revolto is Rc Factory's newest 1m model with increased stiffness and torsion rigidity. We have beefed up everything, but especially the torsion rigidity of the fuselage - so that fuselage twist in fast rolling maneuvers is now totally a thing of the past. The wing is thicker too, for better tolerance of the most insane, high-G stunts. Now with full rotational elevator for massive control!

Those that are familiar with the previous 39” models will appreciate the new hardware and construction including rear tail control push rod assemblies with adjustable end links and new epp bracing for easy assembly. While creating a new ground up air-frame the duel aileron servos have now been re-located which creates a plush/clean look.   The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.  * Spinner not included *    

Model Spec's:
  Wing Span = 39"
  AUW: 400-500g (depending on components used)

Recommended Power System:

Power System Components:

• CSP 2217-1170kv Motor
• CSP 30A Esc
• CSP-
• D14M Servos (4)
• 11x5.5 Gemfan Prop

Other Requirements:

• Receiver  4 - 6 ch: Link 
• 3s 1000/1500mah Lipo: Link
• Adhesive Glue :   Link

Build Resources & Replacement Parts Links:

• PDF Manual Link 1 / Link 2
• RcGroups Build Thread
• Replacement Parts
• Upgrade Parts