VA-Model 41" Extra 330sc EPP Full Fuse

VA-Model 41" Extra 330SC EPP Full Fuse

The VA-Model Extra 330SC brings full-fuselage EPP construction to a larger aerobatic airframe, giving pilots the expanded flight envelope and tumbling ability often associated with larger balsa models while keeping the durability and repair-friendly nature of EPP foam.

Built in Europe by VA Models, the Extra 330SC features detailed printed graphics, a semi-built fuselage structure, removable landing gear, and a capable aerobatic layout based on the full-scale Extra 330SC.

Features and Specifications

• Wingspan: 41 inches
• Length: 41.5 inches
• Estimated Flying Weight: Approximately 22 to 25 oz, depending on equipment
• Construction: Full-fuselage EPP foam airframe with detailed printed graphics
• Airframe: Semi-built fuselage design for faster assembly and improved scale appearance
• Landing Gear: Removable landing gear for easier transport
• Recommended Battery: 3S 1350 to 1800 mAh LiPo
• Recommended Motor Range: 70 to 100 g outrunner, approximately 200 to 300 watts
• Recommended ESC Range: 30A to 45A brushless ESC
• Recommended Propeller Range: 10 x 3.8 to 11 x 5.5
• Flight Style: Sport aerobatics, precision flying, freestyle, tumbling maneuvers, and 3D
• Pilot Level: Intermediate to Advanced

Required to Complete

This is an airframe kit. The recommended power system, radio equipment, battery, charger, adhesive, and spinner are sold separately. No printed manual is included; downloadable PDF resources are available below.

3S Setup: Use a 3S 1350 to 1800 mAh LiPo with the recommended PC70 power system. The matched combo is built around an 11 x 4.5 MR APC propeller for strong aerobatic and 3D performance.

PC70 Power System Includes

• CSP 2217 1170KV brushless motor
• BOLT 30A brushless ESC
• Four CSP-D14M digital metal-gear servos
• APC 11 x 4.5 MR propeller

Important: Always confirm proper CG, control direction, motor direction, and ESC throttle calibration before flight. Remove the propeller before throttle calibration or ESC setup.

Additional Required Items

• 4-channel or greater transmitter and compatible lightweight receiver
• 3S 1350 to 1800 mAh LiPo battery
• LiPo-compatible balance charger
• Servo extensions: three 9-inch and two 6-inch extensions are recommended
• Foam-Tac and CA glue as specified during assembly

Build Resources and Compatible Parts

• View the Extra 330SC PDF Manual
• View the Extra 330SC PDF Manual Backup Link
• View the Extra 330SC RC Groups Build Thread
• Shop Compatible 40 to 48-Inch Replacement Parts
• Shop Upgrade Parts