HM 32" EPP Edge 540 V4.1
- SKU:
- HM 32” Edge 540 V4.1-GREEN
Description
Hacker Models new 540 V4.1 indoor super lite series version of a great acrobatic model with lots of innovations for extreme indoor flying. The model excels in easy construction and has been improved for even more fun and flight experience from beginner to experienced 3D pilots. The basis of the light and strong construction is a new EPP material with 10% lower weight while maintaining the original flexibility.
Specs: Wingspan / Length: 32"/33" AUW: 135-145g
Power System B Link: Components Listed Below
CSP-2203-1800KV Motor
CSP-15A ESC
CSP-D6M Servos (3)
8 x4.3 GWS SF prop
Alternative Power System "PC0V3D/4D COMPETITION” Link:
VS28-05C1950KV Motor
Vertex 3D/4D ESC 17A Reversible ESC
Vertex VX-SV10D Servos (3)
APC 8x3.7 4D Prop
APC 8x4.1 3D Prop
Other Requirements:
Receiver 4 - 6 ch: Link
2s 450mah Lipo: Link
Adhesive Glue : Link
Other Resources:
RcGroups Build: Link
Twisted Hobbys Blog: Link
Videos
View AllClose
Related Products
Related Products
Out of stock, email for arrival date.
Power Combo Vertex 3D/4D Competition V3
$179.99
Experience precision with Twisted Hobbys Electronics with comp spec'd Vertex gear! Our spec-matched, plug-and-play systems deliver peak performance for every airframe. Reliable, powerful, and...
Power Combo Super Lite Series (B)
$129.99
Experience precision with Twisted Hobbys Electronics! Our spec-matched, plug-and-play systems deliver peak performance for every airframe. Save with bundled combos—premium quality at discounted...
BEACON FOAM TAC - 1 oz. TUBE - EPP Models
$10.95
Expect the freshest Beacon Foam Tac glue(s) from Twisted Hobbys due to high turn over. New redesigned tube and cap! Great alternative to Welder Adhesive glue and CA glues when building...
Starbond "Super Fast Thin" CA Glue 2oz
$11.99
PREMIUM CA SUPER GLUE: Industrial-strength for deep penetration on fragile objects, ensuring a strong, lasting hold.
FAST-FLOWING & DEEP PENETRATING: Water-thin super glue reaches
Prop Direct Drive GWS 8 x 4
$1.99
Great for indoor and out door EPP models! *Remember always check prop balance before flying* Color may vary.
Prop Slow Fly GWS 8 x 4.3
$1.99
The new 8x4.3 GWS slow fly prop has been redesigned for longer hub life compared to the original hex hub which also helps better prop balancing! GWS designed this prop with a 7mm hub diameter...
Crack 2S 450mah 25~50c Lipo
$19.99
Crack Pro Series True 25c 2s 450mah Lipo's now with new technology has allowed for increase power with lower weight packs! Crack Pro Series high quality lipo packs delivering a true 25C with...
Volta 2S 450mah 60-80c Lipo
$19.99
Our most powerful battery we have tested and carry! Low voltage drop and ability to delivery very high current these Volta's will not disappoint!
Specs:
Out of stock, email for arrival date.
Prop PT Carbon Fiber 9x2.8
$21.99
PT model prp. 9028i, Extremely lightweight carbon fiber propeller for indoor models. Price per one piece
Weight = 2.8g
Size = 9x2.8
Hub Diameter = 5.5 (same as ou
HM 1 3/4" White EPP Nose Cone Spinner - Prop Saver Motors
$7.99
The ultimate solution for an ultra light weight nose cone for our small prop saver style motors. Not only do these look good, but can provide even greater durability to your EPP model by...
HM 1 3/4" Black EPP Nose Cone Spinner - Prop Saver Motors
$7.99
The ultimate solution for an ultra light weight nose cone for our small prop saver style motors. Not only do these look good, but can provide even greater durability to your EPP model by...
Prop-Saver Bands "Installation Tool"
$8.99
Finally an easy and safe way to install prop saver bands (o-rings) to your out-runner motors. Simple, yet extremely effective design allows for quick and painless prop saver band...
Control Throw Angle-Meter Tool
$12.99
Finally an accurate way to set up all your control surface throws on your 3d models. The Twisted Hobbys Angle-O-Meter is one of the most important tools need to fine tune your models...