TH 35" EPP Crack Fokker Dr.1 Tri

Crack Fokker Dr.1: 35-Inch EPP WWI 3D Triplane

The Crack Fokker Dr.1 combines the unmistakable appearance of a classic WWI triplane with the slow-flight capability and extreme aerobatic performance of the Crack Series. Envisioned by Steve Marble, designed by Cody Wojcik, and produced by RC Factory, it offers a flying experience unlike nearly any other EPP aircraft.

Its large wing area allows an exceptionally wide speed range, from surprisingly quick passes to extremely slow flight. Tight loops, quick axial rolls, hovering, knife-edge flight, and playful dogfighting are all part of the Crack Fokker’s unique personality. Independent aileron servos also allow optional flap mixing for even slower passes and tighter maneuvers.

Key Features

• Classic Fokker Dr.1-inspired appearance with modern 3D performance
• Envisioned by Steve Marble and designed by Cody Wojcik
• Lightweight and durable printed EPP triplane construction
• Extensive carbon-fiber reinforcement provides strength and rigidity
• Large wing area provides an exceptionally wide speed range
• Dual aileron servos allow independent control and optional flap mixing
• Quick axial rolls and extremely tight looping capability
• Capable of hovering, knife-edge flight, rolling maneuvers, and playful WWI-style dogfighting
• Compatible with both 2S and 3S power setups

Specifications

• Wingspan: 35 inches
• Length: 34 inches
• Estimated Flying Weight: Approximately 8.1 oz / 230 g, depending on battery selection
• Construction: Lightweight printed EPP foam with carbon-fiber reinforcement
• Recommended Battery: 2S 600 to 800 mAh or 3S 450 to 600 mAh LiPo
• Pilot Level: Intermediate to Advanced

Required to Complete

This is an airframe kit. The recommended power system and additional required items are sold separately and listed below. No printed manual is included; downloadable PDF build manuals are available under Build Resources below.

Matched Power-System Components

• Motor: CSP-2305 1500KV brushless motor
• ESC: BOLT 16A ESC
• Servos: Four CSP-D10M digital metal-gear servos
• Propeller: 9 x 4.7 slow-fly propeller

Recommended Power Setup

• Standard 2S Setup: 2S 600 to 800 mAh LiPo with the included 9 x 4.7 slow-fly propeller
• Higher-Power 3S Setup: 3S 450 to 600 mAh LiPo with a compatible 8 x 4 direct-drive propeller

Additional Required Items

• Radio System: 4 to 6-channel transmitter and a compatible lightweight receiver
• Battery: Compatible 2S or 3S LiPo battery
• Charger: LiPo-compatible balance charger
• Adhesives: Foam-Tac, thin CA, and medium CA glue

Build Resources, Upgrades and Compatible Parts

• Download the Twisted Hobbys Crack Fokker PDF Build Manual
• View the Alternate Google Drive Manual
• Watch the Crack Fokker Dr.1 Build and Maiden Video
• Visit the Crack Fokker Dr.1 RC Groups Discussion
• Shop the Crack Fokker Carbon-Fiber Upgrade Kit
• Shop Compatible 35-Inch Replacement Parts

We recommend Foam-Tac for the main EPP assembly and thin or medium CA glue where specified for carbon-fiber reinforcement and hardware connections.