TH 39" EPP FLASH RELOADED

(No reviews yet) Write a Review
SKU:
RCF 39 FLASH-RAIN
Availability:
In Stock — Ready to Ship
Pilot Level:
Intermediate-Advanced
  • TH 39" EPP FLASH RELOADED
  • TH 39" EPP FLASH RELOADED
  • TH 39" EPP FLASH RELOADED
  • TH 39" EPP FLASH RELOADED
  • TH 39" EPP FLASH RELOADED
  • TH 39" EPP FLASH RELOADED
  • TH 39" EPP FLASH RELOADED
$164.99

Sold Out

Description

TH 39" EPP Flash Reloaded

The RC Factory Flash Reloaded is an updated version of the original 39" Flash, redesigned for easier assembly while keeping the smooth, forgiving flight characteristics that made it a popular 3D trainer.

Its updated hardware, adjustable pushrod assemblies, EPP bracing, and relocated dual aileron servos give the Flash Reloaded a cleaner layout with predictable control response for learning new maneuvers, sport flying, and full 3D aerobatics.

Features and Specifications

  • Wingspan: 39 inches
  • Estimated Flying Weight: Approximately 375 to 390 g, depending on equipment
  • Construction: Printed EPP with carbon-fiber reinforcement and EPP bracing
  • Flight Characteristics: Forgiving handling with smooth, linear control response
  • Recommended Battery: 3S 850 mAh LiPo with XT30 connector, 25C or higher, with 25C to 60C burst maximum recommended for this system
  • Flight Style: Sport aerobatics, 3D training, freestyle, and aggressive 3D
  • Pilot Level: Intermediate to Advanced

Required to Complete

This is an airframe kit. The recommended power system, radio equipment, battery, charger, adhesive, and spinner are sold separately. No printed manual is included; downloadable PDF resources are available below.

Recommended Matched Power System

View the Flash Reloaded PC11 Matched Power System

3S Setup: Use a 3S 850 mAh LiPo with XT30 connector and the recommended PC11 power system. A 25C or higher pack is recommended, with 25C to 60C burst maximum being a good range for this setup.

PC11 Power System Includes

  • CSP 2213 1100KV brushless motor
  • BOLT 22A ESC with XT30 connector
  • Four CSP-D14M digital metal-gear servos
  • 10 x 4.7 Slow Fly propeller

Important: Always confirm proper CG, control direction, motor direction, and ESC throttle calibration before flight. Remove the propeller before throttle calibration or ESC setup.

Additional Required Items

Build Resources and Compatible Parts

View AllClose

0 Reviews

View AllClose