VA 39" EPP Infinity

VA 39" EPP Infinity

The VA Models Infinity is a 39" EPP aerobatic aircraft designed for demanding pilots who want strong precision, extreme 3D capability, and a stable feel across a wide speed range.

Carbon-fiber reinforcement gives the Infinity the strength needed for aggressive aerobatics, while the airframe remains stable at lower speeds and tracks cleanly through precision maneuvers, freestyle flying, and full 3D performance.

Features and Specifications

• Wingspan: 39 inches
• Length: 42 inches
• Estimated Flying Weight: Approximately 375 to 390 g, depending on equipment
• Construction: Printed EPP with carbon-fiber reinforcement
• Airframe: Reinforced design for aggressive aerobatics and high-energy 3D flying
• Flight Characteristics: Stable low-speed handling with strong tracking through precision and freestyle maneuvers
• Recommended Battery: 3S 1000 to 1500 mAh LiPo, 25C or higher, with 25C to 60C burst maximum recommended for this system
• Flight Style: Precision flying, sport aerobatics, freestyle, and aggressive 3D
• Pilot Level: Intermediate to Advanced

Required to Complete

This is an airframe kit. The recommended power system, radio equipment, battery, charger, adhesive, and spinner are sold separately. No printed manual is included; downloadable PDF resources are available below.

3S Setup: Use a 3S 1000 to 1500 mAh LiPo with the recommended 39" mono matched power system. A 25C or higher pack is recommended, with 25C to 60C burst maximum being a good range for this setup.

Matched Power System Includes

• CSP 2217 1170KV brushless motor
• BOLT 30A brushless ESC
• Four CSP-D14M digital metal-gear servos
• APC 11 x 4.5 MR propeller

Important: Always confirm proper CG, control direction, motor direction, and ESC throttle calibration before flight. Use the recommended propeller and battery range for the selected power system.

Additional Required Items

• 4-channel or greater transmitter and compatible lightweight receiver
• 3S 1000 to 1500 mAh LiPo battery
• LiPo-compatible balance charger
• Foam-Tac and CA glue as specified during assembly

Build Resources and Compatible Parts

• View the VA Models Infinity PDF Manual
• View the Infinity RC Groups Build Thread
• Shop Compatible 37 to 39-Inch Replacement Parts
• Shop Upgrade Parts
• View Compatible LED Lighting Kits