Power Combo CSP Laser Lite, Laser Pro

(3 reviews) Write a Review
SKU:
PC05 ST
MSRP: $155.94
$132.99
— You save $22.95

Sold Out

Description

The PC05 CSP is a professionally matched power system developed for the Crack Yak Lite, Laser Lite, Crack Laser Pro, and similar lightweight EPP 3D aircraft. Every component is selected to work together for light, floaty 2S performance, precise control, reliable operation, and straightforward installation. Bundle and save with a proven package that costs less than purchasing the components individually.

PC05 CSP System Overview
2S Lightweight 3D System
System
PC05 CSP
Motor
CSP 2203 1800KV
ESC
Vertex 16A
BEC Output
6V / 3A SBEC
Battery
2S 350–450 mAh
Included Propeller
GWS 8 × 4.3 SF
Matched for Laser Lite, Laser Pro, and Similar Lightweight Aircraft
The lightweight motor, ESC, mixed-size three-servo package, and propeller are selected for low finished weight, slow-speed control, and responsive 3D performance indoors or outdoors in light wind.
Crack Yak Lite / Laser Lite
Crack Laser Pro
Similar Lightweight 3D Models
Included in the PC05 CSP Package
1 ×
Lightweight 18 g outrunner for responsive 2S power
1 ×
16A continuous with 6V / 3A switching BEC
1 ×
14 g servo for aileron control
2 ×
9 g servos for elevator and rudder control
1 ×
Included for the recommended 2S setup
Additional Items Required
Airframe
Compatible Laser Lite, Laser Pro, or similar lightweight aircraft
Flight Battery
2S 350 to 450 mAh LiPo
Radio System
4-channel or greater transmitter and compatible lightweight receiver
Airframe, battery, receiver, transmitter, charger, and adhesives are not included.
Battery and Propeller Recommendation: Use a 2S 350 to 450 mAh LiPo battery with the included GWS 8 × 4.3 Slow Fly propeller. Select the battery capacity based on the desired balance, weight, and flight duration.
Important Initial Setup: The transmitter’s throttle range must be calibrated before the ESC will arm and operate correctly.
View AllClose

Videos

View AllClose

3 Reviews

  • 5

    This will be another great airplane

    Posted by Ken on Jul 31st 2025

    Just make sure the internet order site has everything needed easily identified to prevent over or under ordering.

  • 5

    Worth Every Penny

    Posted by D. Morcos on Nov 13th 2017

    In short. I have this kit on a crack laser. 900 + flights since purchase and just last weekend the 9g servo quit. Can't ask for any better. Now the same kit is going into my crack laser pro ultra lite.

  • 5

    Power combo

    Posted by William H on Jul 27th 2017

    Sikply Awsome!!!

View AllClose

Related Products

Related Products

Prop Slow Fly GWS 8 x 4.3 Prop Slow Fly GWS 8 x 4.3
Add to Cart

Prop Slow Fly GWS 8 x 4.3

$1.99
The new 8x4.3 GWS slow fly prop has been redesigned for longer hub life compared to the original hex hub which also helps better prop balancing!  GWS designed this prop with a 7mm hub diameter which...
Prop-Saver Bands "Standard Duty" (5)
Add to Cart

Prop-Saver Bands "Standard Duty" (5)

$5.99
Not your ordinary over-the-counter O-ring, great replacement 3/32" thick standard bands ideal for running stock setup systems running 2s! Great replacements for our 14-30g out-runner prop savers...
Prop-Saver Bands "Installation Tool" Prop-Saver Bands "Installation Tool"
Add to Cart

Prop-Saver Bands "Installation Tool"

$8.99
The Prop-Saver Band Installation Tool provides a simple, controlled way to install and remove tight prop-saver bands. Its compact design provides the leverage needed to stretch standard-duty or...
Control Throw Angle-Meter Tool Control Throw Angle-Meter Tool
Add to Cart

Control Throw Angle-Meter Tool

$13.99
The Twisted Hobbys Control Throw Angle-Meter provides a simple, repeatable way to measure aileron, elevator, and rudder movement during aircraft setup. Its bold, easy-to-read scale measures control...