Power Combo Laser 200, SUPER EXTRA, Giles 202 3D/4D
- SKU:
- PC05 4D
Description
The PC05 4D is a professionally matched high-output power system. It provides responsive traditional 3D performance together with transmitter-controlled reverse thrust for advanced 4D flight. Bundle and save with a proven motor, ESC, servo, and propeller package that costs less than purchasing the components individually.
Matched for the Laser 200, Super Extra and Giles 202
The high-output 1950KV motor, reversible ESC, three-servo control package, and dedicated 3D and 4D propellers are matched for these lightweight 34-inch performance airframes.
Battery and Propeller Recommendation: Use a 2S or 3S 450 to 600 mAh LiPo battery. Install the included 3D propeller for conventional forward-only flight or the included APC 8 × 3.7 SFR propeller and matching 5 mm hub for reversible 4D operation.
High-Output 4D System: Reversible operation produces substantial thrust and places greater loads on the airframe than conventional 3D flight. Use the 4D configuration only with a compatible airframe and the correct propeller and hub.
No Low-Voltage Cutoff: The V17R does not provide low-voltage cutoff protection. Use a flight timer and monitor battery voltage to prevent excessive LiPo discharge.
Important Initial Setup: The transmitter’s throttle range must be calibrated before the ESC will arm and operate correctly.
Compatible Aircraft and Setup Resources
Videos
-
Twisted Hobby’s & RC Factory Super Extra Airplane
Had the chance to take my new Super Extra indoors finally! Twi...
-
Crack Laser RC Airplane by Twisted Hobbys
Just got this plane yesterday. This is my favorite plane now. ...
-
Crack Yak Lite Flying Warehouse Fun
Having fun flying with the Twisted Hobbys Crack Yak Lite insid...
Related Products
Related Products
BEACON FOAM TAC - 1 oz Adhesive Glue - EPP Models
$10.99
Beacon Foam-Tac is the flexible, clear-drying adhesive Twisted Hobbys relies on for building and repairing EPP aircraft. Its UV-resistant formula bonds common airframe materials without foaming or...
Carbon Fiber 32" Upgrade Horn Kit "LITE Series"
$36.99
Push your build to the limit!Our Crack Series Lite Carbon Fiber Upgrade Kits are built for the 32" Lite Series EPP models and work with most 7–8mm foamies. Made in the USA, these precision parts...
Prop Direct Drive GWS 8 x 4
$1.99
Great for indoor and out door EPP models! *Remember always check prop balance before flying* Color may vary.Â
Prop Slow Fly GWS 8 x 4.3
$1.99
The new 8x4.3 GWS slow fly prop has been redesigned for longer hub life compared to the original hex hub which also helps better prop balancing! GWS designed this prop with a 7mm hub diameter which...
Prop-Saver Bands "Standard Duty" (5)
$5.99
Not your ordinary over-the-counter O-ring, great replacement 3/32" thick standard bands ideal for running stock setup systems running 2s! Great replacements for our 14-30g out-runner prop savers...
Prop-Saver Bands "Installation Tool"
$8.99
The Prop-Saver Band Installation Tool provides a simple, controlled way to install and remove tight prop-saver bands. Its compact design provides the leverage needed to stretch standard-duty or...
Control Throw Angle-Meter Tool
$13.99
The Twisted Hobbys Control Throw Angle-Meter provides a simple, repeatable way to measure aileron, elevator, and rudder movement during aircraft setup. Its bold, easy-to-read scale measures control...