TH 39" EPP Revolto

TH 39" EPP Revolto

The RC Factory Revolto is a 1-meter EPP aerobatic model designed for pilots wanting a larger, more powerful profile-style 3D aircraft with a wide flight envelope. Increased stiffness and torsional rigidity help reduce fuselage twist during high-speed rolls and aggressive maneuvers.

A thicker wing structure, full rotational elevator, repositioned dual aileron servos, adjustable rear pushrods, and outer aileron counterbalance tabs provide strong control authority, faster roll response, and impressive pitch control.

Features and Specifications

• Wingspan: 39 inches
• Estimated Flying Weight: Approximately 400 to 500 g, depending on equipment
• Construction: Printed EPP with carbon-fiber reinforcement and EPP bracing
• Airframe: Increased stiffness and torsional rigidity for high-speed rolls
• Wing: Thicker Air foilded structure designed for aggressive aerobatics and high-G maneuvers
• Elevator: Full rotational elevator for extreme pitch authority
• Aileron Control: Dual aileron servos with outer counterbalance tabs
• Tail Linkages: Adjustable rear pushrod assemblies
• Recommended Battery: 3S 850 to 1500 mAh LiPo, 25C or higher, with 25C to 60C burst maximum recommended for this system
• Flight Style: Sport aerobatics, precision flying, freestyle, and aggressive 3D
• Pilot Level: Intermediate to Advanced

Required to Complete

This is an airframe kit. The recommended power system, radio equipment, battery, charger, adhesive, and spinner are sold separately. No printed manual is included; downloadable PDF resources are available below.

3S Setup: Use a 3S 850 to 1500 mAh LiPo with the recommended 39" mono matched power system. A 25C or higher pack is recommended, with 25C to 60C burst maximum being a good range for this setup.

Matched Power System Includes

• CSP 2217 1170KV brushless motor
• BOLT 30A brushless ESC
• Four CSP-D14M digital metal-gear servos
• APC 11 x 4.5 MR propeller

Important: Always confirm proper CG, control direction, and ESC throttle calibration before flight. Use the recommended propeller and battery range for the selected power system.

Additional Required Items

• 4-channel or greater transmitter and compatible lightweight receiver
• 3S 850 to 1500 mAh LiPo battery
• LiPo-compatible balance charger
• Foam-Tac and CA glue as specified during assembly

Build Resources and Compatible Parts

• View the Revolto PDF Manual
• View the Revolto PDF Manual Backup Link
• View the Revolto RC Groups Build Thread
• Shop Compatible 37 to 39-Inch Replacement Parts
• Shop Upgrade Parts
• View Compatible LED Lighting Kits