Description
TH 42-Inch EPP Laser XL: Large Precision and 3D Aircraft
The Laser XL combines the presence and energy of a larger aerobatic aircraft with the durability and repairability of EPP construction. It offers precise tracking, strong control authority, and excellent stability for outdoor precision aerobatics and advanced 3D flying.
The wing is bonded along its full contact area to the fuselage spine for increased strength. Counterbalanced aileron tips improve control response while reducing servo load, and the conventional hinged elevator provides dependable pitch authority with excellent durability.
Key Features
- Lightweight and durable EPP foam construction
- Reinforced wing attachment along the full fuselage contact area
- Counterbalanced aileron tips for responsive roll control
- Conventional hinged elevator designed for strength and durability
- Stable outdoor handling with strong control authority
- Designed for precision aerobatics and aggressive 3D flying
Specifications
- Wingspan: 42 inches / 1060 mm
- Length: 43 inches / 1120 mm
- Estimated Flying Weight: Approximately 27 to 30 oz / 765 to 850 g
- Recommended Battery: 3S 1500 to 2200 mAh LiPo
- Construction: Reinforced lightweight EPP foam airframe
- Pilot Level: Intermediate to Advanced
Required to Complete
This is an airframe kit. The recommended power system and additional required items are sold separately and listed below. No printed manual is included; a downloadable PDF build manual is available under Build Resources.
Recommended Matched Power System
View the Laser XL Matched Power System
Preferred Setup: 3S 1500 to 2200 mAh LiPo with an APC 12 x 4.5MR propeller for balanced 3D performance, smooth throttle response, and flight time.
Alternative Setup: 4S 1500 to 2200 mAh LiPo with an appropriate 10 to 11-inch propeller. Confirm that the selected propeller keeps motor and ESC current within their operating limits.
Matched Power-System Components
- Motor: CSP 2814 1050KV 100 g brushless motor
- ESC: BOLT 45A ESC
- Servos: Four CSP-D18M digital metal-gear servos
- Preferred 3S Propeller: APC 12 x 4.5MR
Additional Required Items
- Radio System: 4 to 6-channel transmitter and a compatible lightweight receiver
- Battery: 3S 1500 to 2200 mAh LiPo preferred, or 4S 1500 to 2200 mAh LiPo for the alternative setup
- Charger: LiPo-compatible balance charger
- Adhesive: Foam-Tac or a similar foam-safe adhesive, with CA glue used where specified in the manual
Build Resources, Upgrades and Compatible Parts
Videos
-
LASER XL - RC Factory |SMOKE AVAILABLE|
This is the new Laser XL by RC Factory. A very popular categor...
-
NEW LASER XL from RC-FACTORY
NEW LASER XL designed by team pilot Jan Votava from RC-FACTORY...
-
NEW! Laser XL 💪[RC Factory]
-
Twisted Hobbys Laser XL by Benton Griffin
This is the brand new Twisted Hobbys RC Factory Laser XL. Comb...
1 Review
-
Great product.
Compliments the Yak XL nicely. I added carbon fiber to the wing tips and the results were impressive,