TH 42" EPP Veloxity

(3 reviews) Write a Review
SKU:
RCF 42 Veloxity-RED
Availability:
In Stock — Ready to Ship
  • TH 42" EPP Veloxity
  • TH 42" EPP Veloxity
  • TH 42" EPP Veloxity
  • TH 42" EPP Veloxity
  • TH 42" EPP Veloxity
  • TH 42" EPP Veloxity
  • TH 42" EPP Veloxity
  • TH 42" EPP Veloxity
  • TH 42" EPP Veloxity
$199.99

Sold Out

Description

Designed by Cody Wojcik and inspired by the full-scale Velox Revolution 1, the Veloxity combines precise tracking, fast roll response, strong tumbling performance, and stable 3D handling. Its stiff EPP airframe delivers a crisp, connected feel while remaining durable and predictable for everything from smooth precision aerobatics to aggressive low-altitude 3D flying.

Wingspan
42 in / 1060 mm
Length
43 in / 1120 mm
Flying Weight
765–850 g / 27–30 oz
Construction
Engineered EPP Airframe
Battery
3S 1500–2200 mAh
Skill Level
Intermediate–Advanced
Airframe Kit
This is an airframe kit. The matched power system, receiver, battery, charger, and adhesives are sold separately. A downloadable PDF build manual is available below.
Recommended PC17 Max Power System
The PC17 CSP package pairs a CSP 2814 1050KV motor, BOLT 45A ESC, four CSP-D18M servos, and an APC 12 × 4.5MR propeller with the Veloxity. Use a 3S 1500 to 2200 mAh LiPo for balanced 3D power, smooth throttle response, and practical flight time.
View PC17 Power System
Matched Power System Components
4S Propeller: Compatible 10 to 11-inch propeller (sold separately)
Additional Required Items
Radio: 4+ channel transmitter and compatible receiver
Battery: 3S 1500 to 2200 mAh LiPo preferred; 4S 1500 to 2200 mAh compatible
Important Propeller Selection: The APC 12 × 4.5MR propeller included with the PC17 is intended for the recommended 3S setup. When operating on 4S, use a compatible 10 to 11-inch propeller and confirm that motor and ESC current remain within their operating limits.
View AllClose

3 Reviews

  • 4

    Good Flyer, few bugs on the build

    Posted by Tom Edwards on Aug 21st 2026

    This has been a great plane to fly. For low and slow training I had to dial the rates down to 30%. Still very responsive at 30% and it is quite aggressive on 100% rates. Went with the 12x4.5" MR prop. All the thrust you could want. Knocked 1star off for some of the build issues. #1 The linkages are a bit cheesy. For <$10 on amazon I got 1.3mm metal linkages with stoppers and those are so much better. #2 The tail dragger-thingy is a bit low and the rudder makes contact on grass. I took some extra EPP foam and built up a more solid and taller tail dragger. Also trimmed about 1" off the bottom/end of the rudder to give a little more clearance. #3, is a small gripe and I wish they would pre-cut the wing reinforcement slots. Not a big deal, but would make the build a little easier. All in all it is very good plane.

  • 5

    veloxity

    Posted by Unknown on May 27th 2020

    Super fun to fly! There is nothing it cannot due based on your skill level. No problems with set ups. Love it!

  • 5

    Veloxity

    Posted by David Perkins on Mar 17th 2020

    Flies great! Low and slow or not this plane does it well. I was very impressed with the way it handles the wind also

View AllClose