Power Combo Super Lite Series (B)
- SKU:
- PC06
Description
Experience precision with Twisted Hobbys Electronics! Our spec-matched, plug-and-play systems deliver peak performance for every airframe. Save with bundled combos—premium quality at discounted prices. Reliable, powerful, and easy to install!
Now offering the 3D Standard Flight Power System or the new Vertex 3D/4D Max Power System. Please note:The 3D/4D system may impact the center of gravity on lighter airframes. Additionally, the 4D system delivers exceptional power but can place extra stress on the airframe.
PC06 CSP 3D Power System includes:
- CSP-2203-1800kv Motor
- BOLT-16A ESC
- CSP-D6M Servos (3)
- 8 x4.3 GWS SF prop
PC06 Vertex 3D/4D Power System includes:
- VS28-05C1950KV Motor
- Vertex 3D/4D ESC 17A Reversible ESC
- CSP-D6M Servos (3)
- APC 8x3.7 4D Prop
- APC 8x4.1 3D Prop
- 2s/3s 360-450mah w/ 8" prop
Recommended models listed below:
- Click
- Synergy
- Slick Super Lite
- Extra 330 Super Lite
- Edge 540 Super Lite
- Edge 540 V4.0 / V4.1
- MX2
Related Products
Related Products
BEACON FOAM TAC - 1 oz. TUBE - EPP Models
$9.99
Expect the freshest Beacon Foam Tac glue(s) from Twisted Hobbys due to high turn over. New redesigned tube and cap! Great alternative to Welder Adhesive glue and CA glues when building...
Carbon Fiber 33" Clik & Synergy
MSRP:
$34.99
$29.99
Take your EPP model to the next level with the Clik Super Lite Carbon Fiber Upgrade Hardware Kit! Specifically designed for the Clik models and compatible with the Synergy Super Lite Series, this...
Prop Direct Drive GWS 8 x 4
$1.99
Great for indoor and out door EPP models! *Remember always check prop balance before flying* Color may vary.
Prop Slow Fly GWS 8 x 4.3
$1.99
The new 8x4.3 GWS slow fly prop has been redesigned for longer hub life compared to the original hex hub which also helps better prop balancing! GWS designed this prop with a 7mm hub diameter...
Prop-Saver Bands "Standard Duty" (5)
$5.99
Not your ordinary over-the-counter O-ring, great replacement 3/32" thick standard bands ideal for running stock setup systems running 2s! Great replacements for our...
Control Throw Angle-Meter Tool
$12.99
Finally an accurate way to set up all your control surface throws on your 3d models. The Twisted Hobbys Angle-O-Meter is one of the most important tools need to fine tune your models...