TH 37" EPP Revo P3 Biplane

Revo P3: 37-Inch EPP Aerobatic Biplane

The Revo P3 is a highly capable aerobatic biplane inspired by the full-scale Revolution P3 flown by Skip Stewart. Its distinctive appearance and specially shaped wing cores provide precise tracking while allowing the aircraft to transition quickly into aggressive 3D flight.

Lightweight EPP construction, extensive carbon-fiber reinforcement, and a rigid biplane structure create a durable aircraft with a wide flight envelope. The Revo P3 performs smooth precision aerobatics while offering the control authority needed for hovering, harriers, rolling maneuvers, knife-edge flight, and advanced 3D flying.

Key Features

• Inspired by the full-scale Revolution P3 aerobatic aircraft
• Specially shaped wing cores provide precise and responsive handling
• Lightweight and durable printed EPP biplane construction
• Extensive carbon-fiber reinforcement provides strength and rigidity
• Carbon-fiber landing gear included
• Four-servo configuration provides direct and precise control
• Wide flight envelope for precision aerobatics and aggressive 3D flying
• Capable of hovering, harriers, rolling maneuvers, knife-edge flight, and advanced aerobatics

Specifications

• Wingspan: 37 inches
• Estimated Flying Weight: 15 to 16.5 oz / 425 to 468 g, depending on components used
• Construction: Printed EPP foam with carbon-fiber reinforcement
• Landing Gear: Carbon fiber
• Recommended Battery: 3S 850 mAh LiPo with XT30 connector
• Pilot Level: Intermediate to Advanced
• Spinner: Not included

Required to Complete

This is an airframe kit. The recommended power system and additional required items are sold separately and listed below. No printed manual is included; a downloadable PDF build manual is available under Build Resources below.

Matched Power-System Components

• Motor: CSP 2213 1100KV 60 g brushless motor
• ESC: BOLT 22A ESC with XT30 connector
• Servos: Four CSP-D14M digital metal-gear servos
• Propeller: 10 x 4.7 slow-fly propeller
• Adapter: 2 mm to 3.5 mm motor-connector adapter

Additional Required Items

• Radio System: 4 to 6-channel transmitter and a compatible lightweight receiver
• Battery: 3S 850 mAh LiPo battery with XT30 connector
• Charger: LiPo-compatible balance charger
• Adhesives: Foam-Tac, thin CA, and medium CA glue

Build Resources, Upgrades and Compatible Parts

• Download the Revo P3 PDF Build Manual
• Visit the Official Revo P3 Build and Review Discussion
• Shop the Revo P3 Carbon-Fiber Upgrade Kit
• Shop the Revo P3 Replacement Hardware Bag
• Shop Compatible 37 to 39 Inch Replacement Parts

We recommend Foam-Tac for the main EPP assembly and thin or medium CA glue where specified for carbon-fiber reinforcement and hardware connections.