HM 32" EPP Laser 230

(No reviews yet) Write a Review
SKU:
HM 32” Laser 230-RED
  • HM 32" EPP Laser 230
  • HM 32" EPP Laser 230
  • HM 32" EPP Laser 230
  • HM 32" EPP Laser 230
  • HM 32" EPP Laser 230
  • HM 32" EPP Laser 230
  • HM 32" EPP Laser 230
  • HM 32" EPP Laser 230
  • HM 32" EPP Laser 230
  • HM 32" EPP Laser 230
  • HM 32" EPP Laser 230
  • HM 32" EPP Laser 230
  • HM 32" EPP Laser 230
  • HM 32" EPP Laser 230
  • HM 32" EPP Laser 230
  • HM 32" EPP Laser 230
  • HM 32" EPP Laser 230
  • HM 32" EPP Laser 230
  • HM 32" EPP Laser 230
$119.99

Sold Out

Description

The Hacker Model Laser 230 is a 32-inch indoor aerobatic aircraft that combines scale-inspired styling with the control authority needed for modern 3D and 4D flying. Its reinforced 5 mm EPP construction provides a durable, rigid airframe, while the large ailerons, generous rudder, and full-flying elevator—capable of approximately 85 degrees of movement—deliver exceptional maneuverability without requiring side-force generators.

Wingspan
812 mm / 32 in
Length
883 mm / 34.8 in
Flying Weight
Approx. 150–185 g / 5.3–6.5 oz
Construction
Engineered 5 mm EPP Airframe
Power
2S or 3S LiPo
Skill Level
Intermediate–Advanced
Airframe Kit
This is an airframe kit. The matched power system, receiver, battery, charger, and adhesives are sold separately. The downloadable PDF build manual is available below.
Recommended Matched Power Systems
Choose the lightweight PC06 for conventional indoor aerobatics and 3D flying, or the higher-output Competition system for traditional 3D and transmitter-controlled reverse-thrust 4D operation.
PC06 Lightweight 3D Setup
Motor: CSP 2203 1800KV / 18 g Brushless Motor
Recommended Battery: 2S 300–450 mAh LiPo
3D/4D Competition Setup
CSP3 Servo Option: 1 × CSP-D10M and 2 × CSP-D6M
VX3 Servo Option: 3 × Vertex VX-SV10D
3D Propeller: APC 8 × 4.1 Slow Fly
Recommended Battery: 2S or 3S 600 mAh LiPo
Additional Required Items
Radio System:
4-channel or greater transmitter and compatible lightweight receiver
Flight Battery:
2S 350 mAh or 2S 450 mAh for PC06
2S 600 mAh or 3S 600 mAh for 3D/4D
Power system, radio equipment, battery, charger, and adhesives are not included with the airframe kit.
Important 3D / 4D Selection: The CSP3 and VX3 servo packages are alternative ordering options; select one package when purchasing the Competition system. Use the APC 8 × 4.1 propeller for conventional 3D flight and the APC 8 × 3.7 SFR propeller with the 5 mm hub for reversible 4D operation.
View AllClose

0 Reviews

View AllClose