TH 32" EPP CAP 10
- SKU:
- RCF CAP10-RED
Description
Developed in collaboration with RC Factory team pilot Jan Votava, the 32-inch CAP 10 is an approachable and rugged 3D aircraft for pilots learning aerobatics and experienced flyers seeking responsive performance in smaller areas. As one of the easiest and most durable Standard Mono Series models to build and fly, it combines lightweight EPP construction, pre-hinged control surfaces, and a carbon-fiber truss system for precise control during hovers, harriers, rolling maneuvers, and aggressive aerobatics.
Wingspan
32 in
Length
31 in
Flying Weight
204 g / 7.2 oz
Construction
Engineered EPP Airframe
Power
2S or 3S LiPo
Skill Level
Intermediate
Airframe Kit
This is an airframe kit. The matched power system, receiver, battery, charger, and adhesives are sold separately. A downloadable PDF build manual is available below.
Recommended Matched Power System
The PC02 includes a VS28-05B 1550KV motor, Vertex 16A ESC, one CSP-D14M servo, two CSP-D10M servos, and a 9 × 4.7 propeller for the recommended 2S setup. The system also supports 3S operation with a compatible 8 × 4 propeller.
Important Propeller Selection: The 9 × 4.7 propeller included with the PC02 is intended for 2S operation. When operating the matched system on 3S, use a compatible 8 × 4 propeller.
Build Resources and Compatible Parts
Videos
-
Limited Edition Cap 10 flown by Junior World Champion Lucas Poncet!
We are incredibly proud to have Lucas Poncet, the current Juni...
-
NEW Cap 10 RC Factory
The new CAP 10 is so small but so skillful.
-
Twisted Hobbys/RcFactory Cap 10
Team Pilots Sam Hiatt and Oliver Willis fly the brand new Cap ...
-
RC Factory CAP 10 – LIMITED EDITION 🔥
In this video, I’m super excited to show you the brand new CAP...
Related Products
Related Products
Power Combo 30-32" Standard Mono
MSRP:
$155.94
$132.99
The PC02 is a professionally matched power system developed specifically for the 30–32-inch Twisted Hobbys Standard Series aircraft. Every component is selected to work together for responsive pow
Receiver Micro 6Ch DSMX/DSM2 CRACK PRO 2.4Ghz Spectrum w/ Diversity Antenna
$29.99
The Crack Series Pro 6-channel receiver is a compact, lightweight solution for small to mid-size RC aircraft using Spektrum DSMX or legacy DSM2 transmitters. At approximately 4.1 g, it combines dual...
BEACON FOAM TAC - 1 oz Adhesive Glue - EPP Models
$10.99
Beacon Foam-Tac is the flexible, clear-drying adhesive Twisted Hobbys relies on for building and repairing EPP aircraft. Its UV-resistant formula bonds common airframe materials without foaming or...
Starbond "Super Fast Thin" CA Glue 2oz
$11.99
Starbond Super Fast Thin CA is a water-thin cyanoacrylate adhesive designed to wick deeply into close-fitting joints, hairline cracks, and porous materials. Its fast-flowing consistency reaches...
Carbon Fiber 32" Upgrade Kit "Standard Models"
$31.99
Carbon Fiber Upgrade Hardware Kit – 32" Standard EPP ModelsNot compatible with the MXS-C or Extra NG.
Upgrade your 3
APC 8x4.1 3D Slow Fly Prop
$2.78
These APC 3D Slow Fly props are one of the best 3D Slow Fly props we have tested here at Twisted Hobbys aside from the well known PT-Model carbon fiber props.Â
APC worked their magic and created a...
APC 9x4.1 3D Slow Fly Prop
$3.08
These APC 3D Slow Fly props are one of the best 3D Slow Fly props we have tested here at Twisted Hobbys aside from the well known PT-Model carbon fiber props.Â
APC worked their magic and created a...
Prop-Saver Bands "Standard Duty" (5)
$5.99
Not your ordinary over-the-counter O-ring, great replacement 3/32" thick standard bands ideal for running stock setup systems running 2s! Great replacements for our 14-30g out-runner prop savers...
Prop-Saver Bands "Installation Tool"
$8.99
The Prop-Saver Band Installation Tool provides a simple, controlled way to install and remove tight prop-saver bands. Its compact design provides the leverage needed to stretch standard-duty or...
Control Throw Angle-Meter Tool
$13.99
The Twisted Hobbys Control Throw Angle-Meter provides a simple, repeatable way to measure aileron, elevator, and rudder movement during aircraft setup. Its bold, easy-to-read scale measures control...
Ultra Halo XX0 LED Light Stick Kit – Small
$34.99
The Ultra Halo XX0 is the smallest and lightest Ultra Halo LED lighting kit, developed for approximately 20–35-inch RC aircraft where excellent visibility is needed without adding unnecessary weight...