TH 32" EPP Crack Yak-55 "SUPER-LITE" Green
- SKU:
- RCF TH Crack Yak SL G
Description
Created by Twisted Hobbys team pilot and co-designed with Chris Jewett, the Crack Yak-55 Super Lite is the third evolution of the world-renowned Crack Yak design. By taking the lightweight concept to the extreme, this version delivers exceptionally slow, floaty flight and precise 3D control in gym-sized spaces while retaining the durability and repairability that make EPP aircraft so forgiving.
Wingspan
800 mm / 31.5 in
Length
815 mm / 32.1 in
Flying Weight
120–130 g / 4.2–4.6 oz
Construction
Engineered EPP Airframe
Power
2S or 3S LiPo
Skill Level
Intermediate
Airframe Kit
This is an airframe kit. The matched power system, receiver, battery, charger, and adhesives are sold separately. The downloadable PDF build manual is available below.
Recommended PC04 Matched Power System
The PC04 combines a Vertex VS27-11A 1800KV motor, Vertex 16A ESC, three digital metal-gear servos, and an 8 × 4.3 propeller for the lightweight response and precise control expected from a Super Lite aircraft.
Important Propeller Selection: The included GWS 8 × 4.3 propeller is intended for 2S operation. When using the PC04 system on 3S, use a compatible 6 to 7-inch propeller sold separately.
Build Resources and Compatible Parts
Related Products
Related Products
Power Combo 3D/4D Competition (3 Servos)
MSRP:
$162.49
$139.99
This professionally matched three-servo competition power system is developed for performance-oriented Super Lite 3D, Cartoon, and similar lightweight EPP aircraft. It provides fast throttle...
Power Combo Super Lite Series (A)
MSRP:
$155.94
$132.99
The PC04 is a professionally matched lightweight power system developed for Twisted Hobbys Super Lite and select indoor EPP aircraft. Every component is selected to work together for quick throttle...
Receiver Micro 6Ch DSMX/DSM2 CRACK PRO 2.4Ghz Spectrum w/ Diversity Antenna
$29.99
The Crack Series Pro 6-channel receiver is a compact, lightweight solution for small to mid-size RC aircraft using Spektrum DSMX or legacy DSM2 transmitters. At approximately 4.1 g, it combines dual...
BEACON FOAM TAC - 1 oz Adhesive Glue - EPP Models
$10.99
Beacon Foam-Tac is the flexible, clear-drying adhesive Twisted Hobbys relies on for building and repairing EPP aircraft. Its UV-resistant formula bonds common airframe materials without foaming or...
Starbond "Super Fast Thin" CA Glue 2oz
$11.99
Starbond Super Fast Thin CA is a water-thin cyanoacrylate adhesive designed to wick deeply into close-fitting joints, hairline cracks, and porous materials. Its fast-flowing consistency reaches...
Carbon Fiber RcF "Crack Yak Super Lite" Upgrade Kit
$34.99
It doesn't get more comprehensive then this guys, upgrade it to the max!!! Our new Crack Series Super Lite Carbon Fiber Upgrade Hardware Kits are design for the 32" Super Lite Crack Yak-55...
Prop Slow Fly GWS 8 x 4.3
$1.99
The new 8x4.3 GWS slow fly prop has been redesigned for longer hub life compared to the original hex hub which also helps better prop balancing! GWS designed this prop with a 7mm hub diameter which...
Prop-Saver Bands "Standard Duty" (5)
$5.99
Not your ordinary over-the-counter O-ring, great replacement 3/32" thick standard bands ideal for running stock setup systems running 2s! Great replacements for our 14-30g out-runner prop savers...
Prop-Saver Bands "Installation Tool"
$8.99
The Prop-Saver Band Installation Tool provides a simple, controlled way to install and remove tight prop-saver bands. Its compact design provides the leverage needed to stretch standard-duty or...
Control Throw Angle-Meter Tool
$13.99
The Twisted Hobbys Control Throw Angle-Meter provides a simple, repeatable way to measure aileron, elevator, and rudder movement during aircraft setup. Its bold, easy-to-read scale measures control...
CG Machine (center of gravity) Tool
$29.99
The Twisted Hobbys CG Machine provides a stable, repeatable way to check and adjust the center of gravity on EPP RC aircraft before flight. Set the aircraft at the CG location specified in its...