TH 40" EPP Crack Pitts XL

(1 review) Write a Review
SKU:
RCF Crack Pitts XL-BLUE
Availability:
In Stock — Ready to Ship
Pilot Level:
Intermediate-Advanced
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
  • TH 40" EPP Crack Pitts XL
$219.99

Sold Out

Description

Designed by Cody Wojcik in collaboration with RC Factory, the Crack Pitts XL brings the recognizable Crack Pitts flying style to a larger 40-inch EPP biplane. Its stepped multi-airfoil wing provides stable tracking throughout the flight envelope, while the full-rotating stabilizer delivers the pitch authority needed for tumbles, walls, snaps, knife-edge spins, and advanced 3D aerobatics.

Wingspan
1000 mm / 39.4 in
Length
1030 mm / 40.6 in
Flying Weight
850–992 g / 30–35 oz
Construction
Engineered EPP Airframe
Power
3S or 4S LiPo
Skill Level
Intermediate–Advanced
Airframe Kit
This is an airframe kit. The matched power system, receiver, battery, charger, and adhesives are sold separately. The kit includes the engineered EPP airframe components, carbon reinforcement, landing gear, motor mount, control hardware, and linkage components. Downloadable build manuals are available below.
Recommended Matched Power System
The PC15 includes a CSP 2814 1050KV motor, BOLT 45A ESC, four CSP-D14M servos, and an APC 11 × 4.5 MR propeller for the recommended 3S setup. The system also supports 4S operation with a compatible 10-inch propeller.
View PC15 Power System
Matched Power System Components
Servos: 4 × CSP-D14M servos
4S Propeller: Compatible 10-inch propeller (sold separately)
Additional Required Items
Radio: 4-channel or greater transmitter and compatible receiver
Battery: 3S or 4S 1500 to 2200 mAh LiPo, 25C or greater
Important Propeller Selection: The APC 11 × 4.5 MR propeller included with the PC15 is intended for 3S operation. When operating the matched system on 4S, use a compatible 10-inch propeller and confirm that motor and ESC temperatures remain within a safe operating range.
View AllClose

1 Review

  • 5

    amazing plane

    Posted by Adam, EDGEWOOD FLYERS on May 13th 2025

    This was a great plane, I got it about a month ago. I was conserned with the weels landing on grass but it was fine! it is just as good as my crak yak xl.

View AllClose