TH 33" EPP Extra 330 V3 SUPER-LITE

TH 33" EPP Extra 330 V3 Super Lite

Developed over more than three years by indoor aerobatic pilot Jan Spatny, the Extra 330 V3 Super Lite combines the low weight and precision of an indoor model with the durability of 4 mm EPP.

Its pre-hinged construction, reinforced tail truss, and oversized control surfaces provide fast snap rolls, tight knife-edge loops, and controlled slow flight for advanced indoor freestyle and 3D aerobatics.

Features and Specifications

• Designer: Jan Spatny
• Wingspan: 33 inches
• Length: 35.5 inches
• Estimated Flying Weight: Approximately 150 g / 5.3 oz, depending on equipment
• Construction: Lightweight printed 4 mm EPP with carbon-fiber reinforcement
• Assembly: Pre-hinged control surfaces with a reinforced truss-style tail structure
• Hardware: Carbon-fiber components, laser-cut wood control horns, and snap-in linkage ends
• Power-System Compatibility: Conventional 3D or reversible 4D
• Flight Style: Indoor freestyle, precision aerobatics, advanced 3D, and 4D
• Flying Environment: Indoor facilities or calm outdoor conditions
• Pilot Level: Intermediate to Advanced

Required to Complete

This is an airframe kit requiring assembly. The power system, radio equipment, battery, charger, and adhesives are sold separately. No printed manual is included.

Standard Super Lite Components

• CSP 2203 1800KV brushless motor
• BOLT 16A brushless ESC
• One CSP-D10M and two CSP-D6M digital servos
• GWS 8 x 4.3 slow-fly propeller
• Recommended battery: 2S 360 to 450 mAh LiPo

Vertex 3D/4D Components

• Vertex VS28-05C 1950KV 3D/4D motor
• Vertex 17A switchable 3D/4D reversible ESC
• Three CSP or Vertex digital servos, depending on the selected combo
• APC 8 x 4.1 slow-fly propeller for standard 3D flight
• APC 8 x 3.7 SFR reversible propeller for 4D flight
• Recommended battery: 2S or 3S 600 mAh LiPo

Always install the correct propeller and matching motor hub for the selected 3D or 4D operating mode.

Additional Required Items

• Compatible 4 to 6-channel transmitter and lightweight receiver
• Compatible LiPo battery
• LiPo-compatible balance charger
• Foam-Tac and CA adhesive as specified during assembly

Compatible Parts and Upgrades

• Carbon-Fiber Edge/Extra V3 Super Lite Upgrade Kit
• Shop Compatible 32 to 34-Inch Replacement Parts